Intex CS3220 User manual
133
A
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
OWNER’S MANUAL
Saltwater System
Model CS3220 220 – 240 V~
Don’t forget to try these other fine Intex products: pools, pool
accessories, inflatable pools and in-home toys, airbeds and boats
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
133-*A*-R0-2107
©2020 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle
Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/
Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen
Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong
Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801
Intex Trading
B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
For illustrative purposes only.
IMPORTANT
SAFETY RULES
Please read, understand, and follow all
instructions carefully before installing
and using this product. keep for future
reference.
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 2
Warnings.......................................................................................... 3
Parts References............................................................................. 4
Product Specifications................................................................... 4
Setup Instructions........................................................................... 5
Salt & Pool Water Volumes............................................................ 6
Intex Pools Salt Table..................................................................... 7
Intex Pools Cyanuric Acid Table................................................... 8
Intex Pools Operating Time Table................................................. 9
Non-Intex Pools Salt Table............................................................. 10
Non-Intex Pools Cyanuric Acid Table........................................... 10
Non-Intex Pools Operating Time Table......................................... 10
Operating Instructions.................................................................... 11-12
LED Code Chart............................................................................... 13
Stationary Mounting........................................................................ 14
Maintenance..................................................................................... 15-16
Long Term Storage......................................................................... 16
Pool Maintenance and Chemical Definitions............................... 17
Troubleshooting Guide................................................................... 18-19
Limited Warranty............................................................................. 20
TABLE OF CONTENTS
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 3
WARNING
IMPORTANT SAFETY RULES
READ AND FOLLOW ALL INSTRUCTIONS
made by children without supervision.
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
•
residual operating current not exceeding 30mA.
or making any adjustment to the product.
mowers, hedge trimmers and other equipment.
or similarly qualified persons in order to avoid a hazard.
converter plugs to connect unit to electric supply; provide a properly located outlet.
hands are wet.
accessing the pool.
pools. A storable pool is constructed so that it may be readily disassembled for storage
and reassembled to its original configuration.
the below paragraphs of the manual.
must not be supplied through an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE,
ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.
These product warnings, instructions and safety rules provided with the product represent some
use common sense and good judgement when enjoying any water activity.
For portable Above-Ground-Pools only
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 4
PARTS REFERENCE
and become familiar with all the parts.
NOTE: for illustration purpose only. Actual product may vary. Not to scale. No tools
are required for the assembly.
When ordering parts, be sure to quote the model number and part numbers.
REF. NO. DESCRIPTION QTY. SPARE PART NO.
1 1 12944
2 1
3 2
4 2 12947
1
6 1
7 1 12946
1
9 1
53
1
6
8
7
2
4
9
Inlet (Connector Hose
to Filter Pump)
Outlet (Hose Returning
Water to Pool)
PRODUCT SPECIFICATIONS
Model:
Wattage: 30 W
3000 ppm
:4 grams/hour
maximum flow rate:
/
Limited Warranty: see “Limited Warranty”
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 5
SETUP INSTRUCTIONS
1
instructions.
2
3 p.
4 (2) with a hose clamp (3).
5.
unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs
into the connectors, before installing the saltwater pool system.
6
outlet.
7. (2) to the filter pump outlet connection with a hose clamp (3).
Tighten securely.
8. Remove the black hat-like plugs that prevent water from flowing out of the pool. Now, return
the strainer grids to the strainer connectors.
IMPORTANT
• TheSaltwaterSystemrequiresaseparatefilterpump[300~1000gph(1136~3785lph)]
to drive the water and function properly.
• TheSaltwaterSystemmustbeinstalledasthelastpieceofpoolequipmentinthe
water return line to the pool as displayed below. This location extends the life of the
titanium plates.
• Removeanylargedebrisandparticlessuchasleaves,sand,insectsandbugsfrom
the pool water first.
2
3
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 6
SALT & POOL WATER VOLUMES
• Whichkindofsalttouse:
*
Use only Sodium Chloride Salts
a longer time for them to dissolve. Do not use iodized or yellow (yellow prussiate of soda)
colored salt.
chlorine. The purer the salt the better the performance of the electrolytic cell.
• OptimumSaltLevels
level is 3000 ppm.
the correct dosage of salt needed. The salt in the pool is constantly recycled. The loss of salt is
• AddingSalt
1
2
3
4
5
6
bottom of the pool. Run the filter pump 24 consecutive hours to thoroughly dissolve the salt.
7 press button,
• RemovingSalt
92” disappears.
• PoolVolumeCalculation
Rectangular
Circular
Oval
Types of Pool Gallons
Cubic Meters
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 7
INTEX POOLS SALT TABLE
This table shows the amount of salt needed to achieve and maintain the optimal 3000 ppm salt level.
Pool Size
Water Capacity (Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Salt Needed for
Startup
3.0g/L (3000ppm)
Salt Needed when
Low Salt Detected
(CODE “91”)
(Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs)
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
1942 13 6 2
639 2419 16 7 2
3077 20 9 7 3
12 9 4
37 17 13 6
1926 7290 22 17
9792 29 21 10
12430 37 27 12
3736 14141 94 42 31 14
METAL
FRAME
POOL
13 6 2
30 13 9 4
43 20 7
4440 111 37 17
PRISM
FRAMETM
POOL
30 13 10
43 20 7
2270 26 19 9
12706 13
14614 97 44 32
4440 111 37 17
PRISM
FRAMETM
RECT. POOL
23 11 7 3
400cmx200cmx100cm
21 7
400cmx200cmx122cm
2224 17
72 33 24 11
SMALL RECT.
FRAME POOL
439 1662 11 3 1
603 16 7 2
1013 12 9 4
7127 22 17
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 8
INTEX POOLS CYANURIC ACID TABLE
Pool Size
Water Capacity (Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Cyanuric Acid Needed
for Startup
0.01g/L (10ppm)
(Gals) (Liters) (oz) (g)
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
1942 0.7 19
639 2419 0.9
3077 1.1 31
1.4 39
2.0
1926 7290 2.6 73
9792
12430 4.4 124
3736 14141 141
METAL
FRAME
POOL
0.7 19.0
1.6
2.3
4440
PRISM
FRAMETM
POOL
1.6
2.3
2270 3.0
12706 127
14614 146
4440
PRISM
FRAMETM
RECT. POOL
1.3
400cmx200cmx100cm
2.4
400cmx200cmx122cm
2224 2.9
109
SMALL RECT.
FRAME POOL
439 1662 0.6 17
603 23
1013 1.4 39
7127 71
Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear
and clean, and to maximize the performance of the device, add cyanuric acid to the pool. We recommend that the cyanuric acid
level be maintained at approximately 0.35% of the salt, i.e. 100 Lbs (45 Kgs) salt x0.35% = 0.35 Lbs (0.16 Kgs) cyanuric acid.
If the pool water is dirty, filthy or grimy, DO NOT add chlorine stabilizer (cyanuric acid) as this will slowdown the sanitation
time of the device. Under this condition you must BOOST your pool water, refer to BOOST cycle steps. Once the pool water
has been restored to clear and clean conditions you may add cyanuric acid.
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 9
INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID)
IMPORTANT
Thefilterpumprunningtimeshouldbe1hourlongerthantherequiredoperatingtimeoftheSaltwaterSystem.
Pool Size
Water Capacity (Calculated at
90% for Frame Pool and 80%
for Easy Set & Oval Pool)
Operating Time (hours)
at different ambient/air
temperatures
Intex Filter
pump
Operating
Time
(hours)
(Gals) (Liters)
10 - 19°C
(50 - 66°F)
20 - 28°C
(68 - 82°F)
29 - 36°C
(84 - 97°F)
INTEX ABOVE GROUND POOLS (AGP’s)
EASY SET®
POOL
1942 1 1 1 2
639 2419 1 1 1 2
3077 1 2 2 3
2 2 2 3
3 3 3 4
1926 7290 3 4 4
9792 6
12430 6 6 7
3736 14141 7 7 7
METAL
FRAME
POOL
1 1 1 2
2 2 2 3
3 3 4
4440 9
PRISM
FRAMETM
POOL
2 2 2 3
3 3 4
2270 4 4 6
12706 6 6 7
14614 7 7 9
4440 9
PRISM
FRAMETM
RECT. POOL
1 2 2 3
400cmx200cmx100cm
3 3 4
400cmx200cmx122cm
2224 4 4 6
6 7
SMALL RECT.
FRAME POOL
439 1662 1 1 1 2
603 11 1 2
1013 2 2 2 3
7127 4 4 4
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 10
SALT TABLE FOR COMMON NON-INTEX POOLS
SALT CALCULATION FORMULA FOR ALL POOLS
Salt Needed for Startup
(Lbs)
Salt Needed for Startup
(Kgs)
Salt Needed when
Low Salt Detected (Lbs)
Salt Needed when
Low Salt Detected (Kgs)
Water Capacity Salt Needed for Startup
Salt Needed when
Low Salt Detected
(CODE “91”)
(Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs)
1000 11 4
17 13 6
2000 23 17
9463 63 21 9
3000 34 11
40 29 13
4000 100 33
17033 113 17
OPERATING TIME TABLE FOR COMMON NON-INTEX POOLS (WITH CYANURIC ACID)
CYANURIC ACID TABLE FOR COMMON NON-INTEX POOLS
Water Capacity Cyanuric Acid Needed for Startup
0.01g/L (10ppm)
(Gals) (Liters) (oz) (g)
1000 1.3
2.0
2000 2.7 76
9463 3.4
3000 4.0 114
4.7 133
4000
17033 6.0 170
Water Capacity Operating Time (hours) at different ambient/air temperatures Recommend Filter
pump Operating
Time (hours)
(Gals) (Liters) 10 - 19°C (50 - 66°F) 20 - 28°C (68 - 82°F) 29 - 36°C (84 - 97 °F)
1000 2 2 2 3
3 3 3 4
2000 4 4 4
9463 6
3000 6 6 7
6 7 7
4000 7 9
17033 9
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 11
OPERATION INSTRUCTIONS
1. Turn on the filter pump.
2. Start up the unit:
3. Set operating hours for Saltwater system:
With code “00” flashing, press button to set
Time Table” for the required operating hours
will
increase the time from 01 to 12 hours maximum.
pressing to repeat the cycle. The built-in
the same time each day, for the number of hours you have set.
NOTE:
4. Lock keypad controls:
With the desired hour value showing, press button. A green
seconds to indicate that the saltwater system has started chlorine
production,
it’s finished. Locking the control buttons into this setting prevents
unauthorized changing of the operating cycle.
NOTE:
start working 10 seconds later.
5. Readjust operating time if necessary:
The operating hours can be re-adjusted if necessary. ress button and the current
programmed time will flash. Repeat steps 3 to 4.
6. Stand-by/power saving mode:
•
in 24 hours, starting its daily cycle of chlorine production.
•
or
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 12
OPERATION INSTRUCTIONS (continued)
Set BOOST operating hours:
1.
button to set the desired operating hours. Total of 4 settings: 36 hours,
button to repeat
the cycle.
2. With the desired hour value showing, press button to lock the
tor will light up when activated.
The system is now starting more chlorine sanitizer production. After the boost procedure
has been completed, the system will automatically switch to the normal working mode.
the remaining programmed saltwater system hours.
NOTE:
start working 10 seconds later.
3. To cancel the boost cycle, press button to unlock the keypad, then press button
and reset the hour to “00”.
Set electrode Self-Clean cycle time:
The default self-clean cycle time is 14 hours. To adjust the self-clean
cycle time:
1.
press button to select the self-clean cycle time as below. Total
of 3 settings: 14 hours, 10 hours and 06 hours.
NOTE: The life of the cell varies depending on water conditions, pool usage and
and maintenance will further lengthen the life of the electrolytic cell.
2. With the desired self-clean hours showing, press button to lock the keypad controls
polarity of the electrode (7) every time according to the selected hours.
NOTE:
start working 10 seconds later.
Reverse polarity every 14 hours
Reverse polarity every 10 hours
Reverse polarity every 06 hours
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 13
LED CODE CHART
IMPORTANT
When Code “90” alarm is shown, ensure the timer of the filter pump is set
one (1) hour longer than the Saltwater System.
If the filter pump does not have a built-in timer, the filter pump needs to
be turned on/off manually every day.
LED Reading Definitions
00
01
02
03
04
06
07
09
10
11
12
36
60
90
91
92
93
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 14
SALTWATER SYSTEM STATIONARY MOUNTING
your local authorities to determine if there is a regulation in your area regarding
below.
The product can be mounted on a cement base or onto a wooden platform to
1. The mounting holes are 6.4 mm in diameter and spaced 62 mm apart.
2
62 mm
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 15
MAINTENANCE
IMPORTANT
Unplug the power cord before cleaning your system. Also insert the black hat-like
plugs in the strainer opening to prevent water spillage. After completing all
maintenance tasks, you must plug the power cord back in and remove the plugs.
Titanium Electrode Cleaning
The titanium electrode has a self cleaning function incorporated into the electronic control’s
periodic manual cleaning. To maintain maximum performance, we recommend that you open
and visually inspect the titanium electrode (7) monthly.
The following steps provide instructions on how to clean your cell.
Inspection and cleaning:
1.
2. To prevent water from flowing out of the pool, unscrew the strainer grids from the strainer
connectors and insert the hat-like plugs into the strainer connectors.
3. (seedrawings1~3).
4.
(7) (see drawing 4).
5. (see drawing 5).
6.
high-pressure garden hose (see drawing 6).
7.
1
654
2 3
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 16
MAINTENANCE (continued)
levels at the same time. We recommend that you test the water chemistry weekly, and maintain
the chlorine concentration at 1.0-3.0 ppm.
Directions and Use
1
2
3
1
2
reversing the installation instructions.
3. Air-dry the unit before you store it. This might be a good time to visually inspect and clean
the electrolytic cell.
4
5. The original package can be used for storage.
INTEX®TEST STRIPS (PACkED WITH THE PRODUCT)
LONG TERM STORAGE
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 17
POOL MAINTENANCE & CHEMICAL DEFINITIONS
corrosion of the pool equipment.
that date.
Free Chlorine -
Combined Chlorine -
pH
- A value that indicates how acidic or basic a solution is.
total alkalinity.
Total Alkalinity -
irritation, poor chlorine efficiency.
Calcium Hardness - Refers to the amount of calcium and magnesium dissolved in the water.
cause the water to become cloudy.
Stabilizer -
(Cyanuric Acid)
Preferred Water Chemistry Reading
Minimum Ideal Maximum
Free Chlorine
Combined Chlorine 0 0 ppm 0.2 ppm
pH
Total Alkalinity
Calcium Hardness
Stabilizer (Cyanuric Acid) 10 ppm 10 - 30 ppm 30 ppm
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 18
TROUBLESHOOTING GUIDE
•
• The salt level in the pool water
is less than 2000ppm. This is
insufficient.
•
sunlight exposure.
• The bather load has increased.
•
•
present in the pool water.
•No power supply.
• A power fuse has blown.
•
•
•
•
in use and/or when the unit is operating.
•
•Remove the cell for inspection, clean it if
•
days with the device running and then
test the water using the test strips.
•
to the water and then test the water with the
device running.
•
water and add fresh water to decrease
the electrolytic cell if necessary.
•
•
•
PROBLEM CAUSE SOLUTION
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 19
TROUBLESHOOTING GUIDE (continued)
IMPORTANT
If you continue to experience difficulty, please contact our Consumer Service Department for
assistance. See separate “Authorized Service Centers” sheet.
1.
system and/or switch on.
2
3
direction.
4.
titanium electrode.
5. .
6
and saltwater system.
1
2. Low salt level / No salt.
3
4
1
2
3. Titanium electrode failure.
•
rate is attached and operating
• Remove the black hat-like plugs from the
pool strainer connectors.
•
• Release all trapped air in the circulation line.
•
• .
“Maintenance” section.
•
the plug collar firmly.
•Reset both timers on the filter pump
•Remove primary electrolytic cell for
“Maintenance”.
•
•
into the cell housing receptacle.
•
cell if needed.
•
•
•
LED PANEL
CODE PROBLEM SOLUTION
NOTE
133
A
SAVE THESE INSTRUCTIONS
English
(133IO) SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/21/2020
Page 20
LIMITED WARRANTY
TM
TM
This limited warranty is in addition to, and not a substitute for, your legal rights and remedies.
To the extent that this warranty is inconsistent with any of your legal rights, they take priority.
consumers/ecc/contact_en/htm.
The provisions of this limited warranty apply only to the original purchaser and are not
transferable. This limited warranty is valid for the period noted below from the date of the
will be required and must accompany warranty claims or the limited warranty will be invalid.
TM
Titanium electrode
TM during the warranty
item is covered by the provisions of the warranty, the item will be repaired or replaced, with
third party for direct or consequential damages arising out of the use of your TM
consequential damages, this limitation or exclusion does not apply to you.
TM is subject to negligence, abnormal use or
application, accident, improper operation, improper voltage or current contrary to operating
instructions, improper maintenance or storage;
TM
caused by exposure to fire, flood, freezing, rain, or other external environmental forces;
TM
The costs associated with the loss of pool water, chemicals or water damages are not covered
Read the owner’s manual carefully and follow all instructions regarding proper operation and
TM
use. This limited warranty will be void if use instructions are not followed.
Table of contents
Other Intex Lighting Equipment manuals
Intex
Intex Krystal Clean Poolwater 8220 User manual
Intex
Intex 42in User manual
Intex
Intex 164122ND User manual
Intex
Intex 121PO Operating manual
Intex
Intex Quick-Fill AP620-3 User manual
Intex
Intex CS8110 User manual
Intex
Intex SL503 User manual
Intex
Intex Pool Volleyball Set User manual
Intex
Intex 80PO User manual
Intex
Intex 57266EU User manual
Intex
Intex Newel User manual
Intex
Intex 58839AL User manual
Intex
Intex 48" User manual
Intex
Intex 128054 User manual
Intex
Intex Hydro Flow Swim Trainer SM24100 User manual
Intex
Intex 52" User manual
Intex
Intex BL693 IPX8 User manual
Intex
Intex 28076 User manual
Intex
Intex Ladder User manual
Intex
Intex Rondo 126732GN User manual
