Ironwood GLACIER 14911910 User manual

LIBRARY SHELVING UNIT
14911910 14939470
14912040 14912060
14912170
DOUBLE BASE UNIT
0920
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
Thank you for purchasing Ironwood Shelving.
Please consult your local building codes when
installing shelving. It is recommended that all single
face shelving be attached to the wall, while double
face shelving over 60” in height should be attached
to the oor. These are guide lines and vary from
state to state.

PARTS DIAGRAM
HARDWARE
C
E
14911910
14939470
14912040
14912060
14912170
01300141
2 ea.
2 ea.
2 ea.
2 ea.
2 ea.
14911910 - 6 ea.
14939470 - 6 ea.
14912040 - 8 ea.
14912060 - 10 ea.
14912170 - 12 ea.
412226
H2 Book Stop
H4 Rafix Bolt 909923 16 ea.
14911910 - 40 ea.
14939470 - 40 ea.
14912040 - 50 ea.
14912060 - 60 ea.
14912170 - 70 ea.
988056
H3
# 8 x 5/8"
Panhead
Screw
H7 Metal Frame 412026 1 ea.
Top 01300101 1 ea.
Fixed/
Adjustable
Shelf 01200124
6 ea.
6 ea.
8 ea.
10 ea.
12 ea.
A
14911910 - 16 ea.
14939470 - 16 ea.
14912040 - 16 ea.
14912060 - 16 ea.
14912170 - 16 ea.
909910
H1 Rafix Cam
Side
14911910
14939470
14912040
14912060
14912170
The diagram show one size for ease of viewing. Any differences will be indicated in each part’s description.
H6 Rafix Shelf Pin 909924 16 ea.
14911910 - 16 ea.
14939470 - 16 ea.
14912040 - 24 ea.
14912060 - 32 ea.
14912170 - 40 ea.
909912
H5 Rafix Shelf
Cam

it is important to read all the way through the Adder instructions
(enclosed in the Adder carton) before beginning. It will be necessary
to substitute a Divider (J) for a Right Side (B) during assembly.
NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step
’ s text.
If you have purchased an Adder unit
to be assembled in conjunction with this Base unit,
it is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

ASSEMBLE DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge of
the cam should be facing the edge
of the panel.
Slide Rafix Cams of the panel to be
attached onto the corresponding posts.
Using a #3 Phillips screwdriver, turn the
rotating portion of the Rafix Cam a 1/2
turn clockwise to secure. IMPORTANT!
Do not exceed 1/2 turn when tightening
cams. Turn 1/2 turn counterclockwise
to disassemble and remove panel.
When screwing post
into hole, Do Not
over tighten. Screw
post down until
bottom face of post
flange just touches
board surface.
Flat
edges
must be
aligned

H2
H3
E
H5
H5
#1
#2
Install eight Rafix Cams
(H1) into the Top Panel
(C) as shown.
H1
C
H1
H1
H1
H1
H1
H1
H1
H1
E
H1
H1
H5
H1

#3 Place both Side (A)’s on a clean, carpeted surface as shown. Place Rafix bolts
(H4) in each Side Panel into the selected pre-drilled holes as indicated.
SIDE
PANELS
FOURTH SET
OF HOLES
FROM BOTTOM
TOP SET OF HOLES
H4
H4
H4
H4
H4
H4
H4
H4
H4
For a 3/4" Back, follow the directions for a
Back Panel. Attach the Back Panel (D) to the
Side (A) as shown. Tighten the Rafix Cams
(H1) 1/2 turn.
#4
H3
H1
H7 D
METAL FRAME 3/4" BACK
For a Metal Frame, attach the Frame (H7) as
shown using five #8 x 5/8" Panhead Screws.
NOTE: If you are installing an Adder, follow the instructions for an Adder unit at this time.

#5
METAL FRAME: 3/4" BACK :
NOTE: If you are installing the Toe Space option, it is recommended to install the Toe
Space at this time. Follow the directions included with the Toe Space option.
With the assistance of another person, stand the assembly
upright and attach the other Side Panel.
METAL FRAME: 3/4" BACK :
C
H1 H1 C H1 H1
#6 Attach the Top Panel (C) using the Rafix System. Turn the
eight Rafix Cams (H1) 1/2 turn clockwise to secure.

#7
E
E
METAL FRAME: 3/4" BACK :
E
E
Attach two Fixed Shelves (E) in the same manner.
Placement of the Adjustable
Shelves is optional. The diagram
below shows a recommended
placement for the spacing of the
shelves.
NOTE: The diagram shows the
LS84DB. The shorter bookcases
will use the appropriate sets of
placements.
#8 TOP
TOP
55TH SET OF HOLES
FROM THE BOTTOM
44TH SET OF HOLES
FROM THE BOTTOM
34TH SET OF HOLES
FROM THE BOTTOM
24TH SET OF HOLES
FROM THE BOTTOM
14TH SET OF HOLES
FROM THE BOTTOM

#9
Insert Rafix Shelf Pin(H6)
into both Sides at the
preferred heights for the
Adjustable Shelves.
H6
Place the Adjustable
Shelves (E) into each side
of the unit by sliding the
Rafix Shelf Cams(H5) in to
Rafix Shelf Pin(H6)
#10
FINISHED
EDGE
E
H6

#11
Your Glacier Library Shelving
unit is now assembled and
ready for use.
Find Ironwood Glacier Shelving @demco.com,
search glacier shelving
Call 800.962.4463 or email [email protected]