Ironwood GLACIER LS42SA User manual

0920
LIBRARY SHELVING UNIT
LS42SA LS48SA
LS60SA LS72SA
LS84SA
SINGLE ADDER UNIT
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
Thank you for purchasing Ironwood Shelving.
Please consult your local building codes when
installing shelving. It is recommended that all single
face shelving be attached to the wall, while double
face shelving over 60” in height should be attached
to the oor. These are guide lines and vary from
state to state.

PARTS DIAGRAM
HARDWARE
JC
E
Divider - LS42SA
Divider - LS48SA
Divider - LS60SA
Divider - LS72SA
Divider - LS84SA
01200144
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
LS42SA - 3 ea.
LS48SA - 3 ea.
LS60SA - 4 ea.
LS72SA - 5 ea.
LS84SA - 6 ea.
412226
H2 Book Stop
LS42SA - 25 ea.
LS48SA - 25 ea.
LS60SA - 30 ea.
LS72SA - 35 ea.
LS84SA - 40 ea.
988056
H3
# 8 x 5/8"
Panhead
Screw
H7 Metal Frame 412026 1 ea.
Top 01200101 1 ea.
Fixed/
Adjustable
Shelf 01200124
3 ea.
3 ea.
4 ea.
5 ea.
6 ea.
LS42SA
LS48SA
LS60SA
LS72SA
LS84SA
LS42SA - 8 ea.
LS48SA - 8 ea.
LS60SA - 8 ea.
LS72SA - 8 ea.
LS84SA - 8 ea.
909909
H1 Rafix Cam
H4 Rafix Bolt 909923 8 ea.
LS42SA - 8 ea.
LS48SA - 8 ea.
LS60SA - 12 ea.
LS72SA - 14 ea.
LS84SA - 20 ea.
909912
H5 Rafix Shelf
Cam
LS42SA - 8 ea.
LS48SA - 8 ea.
LS60SA - 12 ea.
LS72SA - 16 ea.
LS84SA - 20 ea.
909924
H6 Rafix Shelf
Pin

NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step
’ s text.
It is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

ASSEMBLE DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge of
the cam should be facing the edge
of the panel.
Slide Rafix Cams of the panel to be
attached onto the corresponding posts.
Using a #3 Phillips screwdriver, turn the
rotating portion of the Rafix Cam a 1/2
turn clockwise to secure. IMPORTANT!
Do not exceed 1/2 turn when tightening
cams. Turn 1/2 turn counterclockwise
to disassemble and remove panel.
When screwing post
into hole, Do Not
over tighten. Screw
post down until
bottom face of post
flange just touches
board surface.
Flat
edges
must be
aligned

#1
H2
H3
E
H5
H5
Install four Rafix Shelf
Cams (H5) into each
adjustable shelf. Attach
a Book Stop (H2) to
each Fixed/Adjustable
Shelf (E) using five
Panhead Screws (H3)
in the pre-drilled holes.
Instal four Rafix
Cams(H1) into each
fixed shelf
H5
H1
E
H1
H1
#2
Install four Rafix
Cams(H1) into the Top
Panel (C) as shown. C
H1
H1
H1
H1
H1

Place the Divider (J) on a clean, carpeted surface as shown. Place Rafix bolts (H4) in
each Side Panel into the selected pre-drilled holes as indicated into each side of the
panel.
#3
J
J
H4 H4
H4
H4
TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM
FRONT
FRONT
TOP
If you are attaching the Adder unit
to a previously assembled Base
unit, it will be necessary to partially
disassemble the unit.
Remove all the Shelves (E) and
Top (C).
#4
E
C
E
E
E
H4

H3
H8
METAL FRAME 3/4" BACK
With the assistance of another person, remove one Side Panel.
#5
Remove five Panhead
Screws (H3).
Turn Rafix Cams (H1) 1/2 turn
counter clockwise to loosen.

Attach the Divider Panel (J).
#6
J
METAL FRAME 3/4" BACK
H3
H8
#7 METAL FRAME 3/4" BACK
C
E
C
E
Use five #8 x 5/8"
Panhead Screws (H3).
Turn Rafix Cams (H1) 1/2 turn
clockwise to tighten.
Attach the Top
Panel (C) and the
Fixed Shelf (G). Be
sure to turn the
Rafix cams (H1)
1/2 turn to tighten.

#8
C
A
J
D
E
METAL FRAME 3/4" BACK
H8
TIGHTEN
1/2 TURN
H6
H3
Attach either a Metal Frame (H6) or Back Panel (D) as shown.
#9 Attach the Right Side (B) as shown. For a metal Frame use five Panhead Screws (H3).
For a 3/4" Back, lock the Rafix Cams (H8).
C
A
J
BBD
E
H6
H3
METAL FRAME 3/4" BACK
H8
TIGHTEN
1/2 TURN

Assemble the Top Panel (C) and the Fixed Shelf (E) to the unit as shown.
Lock the Tab-V Cams (H1) to secure the parts in place.
#10
B
E
C
J
METAL FRAME: 3/4" BACK:
H1
H1
H1 H1
B
E
C
D
H1
H1
H1 H1
Insert rafix shelf pins (H6) at
desired shelf heights. Place the
Adjusting Shelves (E) in the unit.
#11

Your Glacier Library Shelving Unit is now assembled and ready for use.
#12