iSi Whipper User manual

EN
English
2
DE
Deutsch
14
FR
Français
20
IT
Italiano
32
ES
Español
38
NL
Nederlands
44
SE
Svenska
50
PT
Português
56
EL
εηνικά
62
RU
Русский
68
PL
Polski
74
CZ
Čeština
80
HU
Magyar
86
HR
Hratski
92
SI
Slovenski
98
TR
Türkçe
104
AR

110
KO
한국어" 한국어
116
ZH
中文
122
TH
ชาวไทย
128

2
EN
Thank you for
choosing an iSi
product.
Please read the Whipper instructions
carefully before first-time use.

3
Discover the
world of iSi:
Visit the iSi website and learn
more about our extensive range of
products: Our comprehensive collec-
tion of recipes from simply yummy to
creatively sophisticated combinations
offers you access to the entire culinary
world of iSi. Let yourself be inspired!
Want to speak directly with a cooking
professional? No problem! Our head chef
is happy to answer your questions on
our iSi blog, where you can find up-to-
date, interesting information all about
iSi. Take a look!
The iSi website provides detailed
product information about all iSi
Whippers/Siphons and iSi Accessories.
The detailed online instructions
provide information about first-time
use, cleaning, and troubleshooting iSi
Whippers and Siphons.
www.isi.com/culinary
www.isi.com/culinary/us
If you have any further questions please
contact [e-mail]
For the US: [e-mail]
EN

4
Guaranteed quality:
Every iSi Whipper and Siphon is thoroughly
inspected before leaving the factory. iSi offers
a two-year warranty for materials and machin-
ing, as long as faults are not determined to be
the result of improper use. The warranty is ef-
fective from the date on the purchase receipt.
Register online now and we will extend your
warranty!
Enjoy the benefits of a three-year warranty for
materials and machining.
The warranty is only valid when original whip-
per parts from iSi are used, as given in the list
of product components. The perfect function of
your Whipper/Siphon can only be guaranteed if
you exclusively use iSi chargers with it. No war-
ranty or liability claim will be upheld for faults,
damage, or consequential damage particularly
determined to be the result of non-compliance
and/or ignorance of the user instructions and
the safety information therein.
FOR U.S. ONLY:
Limited warranty, Limitations and Warning:
iSi products are thoroughly tested before they
leave the factory, and iSi warrants for a period
of two years that its products are free from de-
fects in materials and workmanship and, if used
only with other iSi products, will function as
intended. iSi’s liability in the event of a product’s
failure to meet this warranty is limited to repair
or replacement of the product or, at iSi’s option
or if iSi is unable to deliver a replacement prod-
uct, to refund the purchase price. In no event,
however, shall iSi be liable for incidental or
consequential damages. Any implied warranties
are limited to the terms of the express warran-
ties, including the two-year duration. iSi cream
whipping systems, bottles and chargers are
designed and engineered to function together
as a system and involve gas under pressure.
All iSi products and parts bear the iSi logo; iSi
recommends that only iSi parts and products
be used with iSi products, including that only iSi
chargers be used with iSi Whippers/Siphons and
that iSi chargers be used only in iSi Whippers/Si-

5
phons. Failure to follow this recommendation or
any failure to follow the instructions for use and
care of the products invalidates this warranty
and all implied warranties in their entirety as to
any consequences of such failure.
WARNING: In addition, failure to follow this
recommendation or any of the instructions for
use and care constitutes misuse of iSi products
and could result in malfunction of the system
and possible personal injury and/or property
damage. In the event of any personal injury,
you should promptly seek appropriate medical
attention.
EN
For the US please refer to
www.isi.com/warranty/us
Simply register online and take
advantage of the extended benefits:
www.isi.com/warranty

6
Whipper Data.
Max. service
pressure PS 20 bar / 290 psig
Min. operating
temperature 1°C / 34°F
Max. operating
temperature 30°C / 86°F
Max. filling volume 0.25L / half US pint
0.5L / 1 US pint
Max. number of
chargers to be used 1 iSi cream charger
Usage Not approved for
commercial use.
For fresh, pure
cream, and desserts.
Suitable for cold
preparations only.
Material List.
Description Material
Bottle Stainless steel
Head
PBT, POM, silicone,
nickel-plated brass,
PU, stainless steel
Head gasket TPE
Decorator tip Adapter: PA
Spout: PP
Charger holder PA
Dispensing piston PA, NBR, silicone,
stainless steel
Silicone cover Silicone

7
Safety Information.
Failure to follow this safety instructions or any
recommendation for use and care constitutes
misuse of iSi products and could result in mal-
function of the system and possible personal
injury and/or property damage.
——— Do not exceed minimum or maximum pres-
sure, minimum or maximum temperature,
maximum filling volume, number of char-
gers or usage of the iSi Whipper shown in
the Whipper Data! Do not use for any pur-
poses not indicated in these instructions!
——— Please read the instructions for use
carefully to avoid operating errors and
keep a copy on hand!
——— Do not use force when screwing on or off
the head, using the whipper and during any
operation described in these instructions!
——— Store the iSi Whipper out of the reach of
children!
——— Only charge a whipper that is filled!
——— Never store or use the iSi Whipper
outside of the min. and max. operating
temperatures. Do not store in a freezer!
——— Only use a head and bottle of the same iSi
Whipper model together!
——— Never combine iSi components with com-
ponents from another brand or manufac-
turer!
——— The head and the charger holder should
always be screwed on straight and comp-
letely tight, never crooked or incompletely
tightened!
——— Only use original iSi cream chargers!
EN

8
——— When screwing on the charger, do so away
from others and keep face away from the
whipper; do not bend over the whipper!
——— The whipper is a pressure equipment. If
it is dropped or damaged (e.g., cracked or
dented), do not use again because it poses
a risk of injury. Please have the whipper
checked by the iSi service center!
——— Never unscrew the head when the
whipper is pressurized!
——— Never use the lever as a carrying handle!
——— Proper cleaning is a mandatory require-
ment in order to avoid the whipper becom-
ing blocked. Check that the iSi Whipper has
been properly cleaned before use!
——— Only dismantle the iSi Whipper for cleaning
in accordance with the illustration!
——— Only clean by hand using lukewarm water
and domestic hand dishwashing detergent.
The iSi Whipper is not dishwasher safe!
Cleaning the head of the whipper in the
dishwasher may damage the plastic head
and the charger holder, which ultimately
puts your safety when using your iSi Whipper
at risk!
——— Do not make any modifications to the iSi
Whipper. This will void the warranty and
exempt the company from any liability!
——— Never use more chargers than specified
and never overfill the whipper. This will
ensure that the specified maximum
operating pressure is not exceeded!
——— If the pressure will not release, please con-
tact iSi or your service center!
NOTE: Before using the iSi Whipper for the first
time, carry out thorough cleaning as shown in
the Cleaning illustration
NOTE: To avoid the formation of lumps, you
should completely dissolve powdered ingre-
dients such as sugar, etc., in some liquid before
filling. Do not use any ingredients with fruit
pulp or seeds.
NOTE: The silicone cover is used for decoration.
The iSi Whipper can be operated perfectly well
without it.

9
Instructions for Use.
NOTE: Please observe the illustrations
“instructions for use”!
Cream/cream-based desserts should be cold
when filled. Dispense cream/cream-based
desserts from the iSi Whipper shortly before
eating.
Preparation
1. Make sure that the head gasket is inserted
into the head.
2. Insert dispensing piston into the head.
3. Screw the adapter onto the dispensing
piston, not too tight but enough to be se-
cure, and screw the decorator tip onto the
adapter.
4. Fill bottle with the prepared mixture.
NOTE: Please note the fill line and marking on
the bottom of the bottle. Do not overfill! The
remaining empty space is required for opti-
mal whipping results. Use a measuring cup.
5. If required, carefully pull the silicone cover
over the bottle from above.
Equipment Setup
6. Screw the head onto the bottle so that it is
straight and tighten by hand.
7. Insert the original iSi cream charger into the
charger holder.
NOTE: Never screw on the charger when
there is no adapter attached to the dispens-
ing piston.
8. Screw the charger holder with the inserted
charger onto the head until you can hear
that all of the charger contents have flowed
into the whipper.
WARNING: The whipper is now pressurized!
9. Shake the whipper vigorously > 5.
10.Unscrew the charger holder and recycle the
empty charger.
EN

10
NOTE: A slight hissing noise may be heard
when removing the charger holder. This is
normal.
11. Screw the cap onto the thread.
Operation
12.For dispensing, the device must be held „head-
first“ (with the decorator tip facing down-
wards!) and the lever must be operated gently.
NOTE: Test the consistency of the contents
when the whipper is first used. Shake the
whipper again if the consistency is still too
runny.
Cleaning.
NOTE: Please observe the illustrations
on cleaning!
1. Press the lever until the whipper is com-
pletely empty and there is no pressure left.
Remove the head from the bottle.
2. Remove the adapter from the dispensing
piston and remove the decorator tip from
the adapter.
3. If the silicone cover was used, remove this
from the iSi bottle by pulling it upwards
and clean by hand using domestic hand dish-
washing detergent.
4. Remove the head gasket and the dispensing
piston for basic cleaning.
5. Clean product components by hand using
warm (max. 50°C) potable water along with
domestic hand dishwashing detergent and
clean the dispensing piston and decorator tip
using the cleaning brush. Completely remove
any traces of fat or egg white.
NOTE: Do not use scouring agents or abra-
sive sponges/brushes.
NOTE: Do not put in the dishwasher and do
not wash in boiling water.
NOTE: The decorator tip can be unscrewed
at any time for periodic cleaning.

11
Storage.
If the iSi Whipper is not going to be filled again
immediately, leave the components to air dry
in a clean place and store the iSi Whipper in a
dismantled condition. Never store the whipper
with the head screwed on!
Troubleshooting.
Release the pressure
Place the whipper upright, place a towel over
the decorator tip and gently operate the lever
until the pressure is gone from the iSi Whipper.
Now the head can be removed from the bottle.
If the pressure will not release, please contact
iSi or your service center.
I cannot remove the content and/or the iSi
Whipper sprays.
1. There is a blockage due to undissolved ingre-
dients such as sugar:
——— „Release the pressure“ and then carry
out „Cleaning“.
——— Make sure that powdered ingredients
are dissolved completely.
2. The cream or cream-filled preparation has
become too stiff:
——— Next time decrease the intensity and
frequency of the shaking cycles.
——— For information on the frequency of the
shaking cycles, refer to www.isi.com/
home-edition/whippedcream.
3. Content is too firm due to over-cooling:
——— Leave the whipper to stand at room
temperature for around 5-10 minutes.
——— Avoid freezing the content.
4. No pressure/not enough pressure in the device:
——— Only use original iSi cream chargers.
——— Do not reuse empty chargers. They
should be recycled immediately.
——— Only operate the whipper „headfirst“
with a vertical decorator tip because
otherwise there could be a loss of pres-
sure.
EN

12
5. Too many chargers were used:
——— Pay attention to the maximum number
of chargers to be used indicated in the
Whipper Data.
——— „Release the pressure“ and then set-up
again.
The content being dispensed is too runny.
1. The whipper was overfilled:
——— „Release the pressure“, pour out the ex-
cess liquid and then set-up the whipper
again.
——— Observe the maximum filling amounts.
2. The Whipper was not shaken or not shaken
enough:
——— For information on the frequency of the
shaking cycles, refer to www.isi.com/
home-edition/whippedcream.
3. The content is not cold enough:
——— Place a filled and prepared iSi whipper in
the refrigerator for at least 1-2 hours.
4. An unsuitable charger was used:
——— Only use original iSi cream chargers.
The cream charger will not puncture.
1. The charger being used is not suitable:
——— Only use original iSi cream chargers.
2. The charger was inserted backwards:
——— Insert the charger correctly
(see diagram: Instructions for Use).
3. The puncturing unit has been damaged:
——— Send the whipper to iSi or to a
service center.
During operation, gas is leaking through the
dispensing piston or adapter.
1. The device was used without the adapter:
——— Before screwing on the charger, make
sure that the adapter is attached
to the dispensing piston.
——— „Release the pressure“ and then set-up
the whipper again.
2. The dispensing piston seal has been damaged:
——— The dispensing piston needs to be
replaced and is available as an original
iSi spare part.

13
During operation, gas is leaking between the
bottle and the head.
1. The head gasket is missing:
——— „Release the pressure“ and insert the
head gasket into the head.
2. The head gasket has been damaged:
——— „Release the pressure.“ The head gasket
needs to be replaced and is available as
an original iSi spare part.
3. The head was not tightened securely:
——— „Release the pressure“
——— Tighten the head on to the bottle by
hand as per the instructions.
4. The bottle has been damaged on the upper
edge:
——— „Release the pressure“ and send the
whipper to iSi or a service center.
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability
of replacement parts. In Austria, you can also
get in contact via [e-mail]. In the US con-
tact [e-mail]
Only send in the complete whipper for repairs.
Replacement parts can be seen in greater
detail on the expanded drawing.
EN

14
DE
Vielen Dank,
dass Sie sich für
ein iSi Gerät
entschieden haben.
Bitte lesen Sie sich die
Gebrauchsanleitung vor der
ersten Inbetriebnahme
sorgfältig durch.

15
DE
Die Welt von iSi
entdecken:
Besuchen Sie die iSi Website und
erfahren Sie mehr über unser viel-
fältiges Angebot: Unsere umfangreiche
Rezeptsammlung von einfach gut bis
kreativ raffiniert eröffnet Ihnen die
ganze kulinarische Vielfalt von iSi.
Lassen Sie sich inspirieren!
Sie wollen sich direkt an einen Koch-
profi wenden? Kein Problem! Auf dem
iSi Blog beantwortet unser Chefkoch
gerne Ihre Fragen. Außerdem erhalten
Sie laufend neue interessante Informati-
onen rund um iSi. Schauen Sie rein!
Die iSi Website versorgt Sie zudem mit
detaillierten Produktinformationen zu
allen iSi Geräten & Accessoires.
Die ausführliche Onlinegebrauchs-
anleitung liefert Ihnen im Detail alle
Informationen zu Inbetriebnahme,
Reinigung und Fehlerbehebung
der iSi Geräte.
www.isi.com/kulinarik
Bei Fragen wenden Sie sich an
[e-mail]
Für Deutschland: [e-mail]

16
Garantierte Qualität:
Jedes iSi Gerät wird eingehend überprüft, bevor
es das Werk verlässt. iSi übernimmt 2 Jahre
Garantie auf Material und Verarbeitung, sofern
nicht durch unsachgemäßen Gebrauch Mängel
entstanden sind. Die Garantie gilt ab dem Datum
des Kaufbeleges.
Registrieren Sie sich jetzt online und wir
erweitern Ihre Garantie!
Für registrierte Kunden verlängert iSi die
Garantie: 3 Jahre Garantie auf Material und
Verarbeitung.
Die Garantie gilt nur bei Verwendung von
original Geräteteilen von iSi, entsprechend der
Liste der Produktbestandteile. Für die ein-
wandfreie Funktion des Gerätes können wir
nur garantieren, wenn zudem ausschließlich iSi
Kapseln verwendet werden. Für Fehler, Schä-
den und Folgeschäden, die insbesondere durch
Nichtbeachtung und/oder das Nichtlesen der
Gebrauchsanweisung und deren Sicherheitshin-
weise entstehen, besteht weder Garantie- noch
Haftungsanspruch.
Einfach anmelden &
Vorteile sichern:
www.isi.com/garantie

17
Gerätedaten.
Max. Betriebsdruck PS 20 bar
Minimale
Betriebstemperatur
1°C
Maximale
Betriebstemperatur
30 °C
Max. Füllvolumen 0,25 L
0,5 L
Max. Anzahl zu ver-
wendender Kapseln 1 iSi Sahnekapsel
Anwendung Für die gewerbliche
Anwendung nicht
zugelassen. Für
frische pure Sahne
& Desserts. Nur für
kalte Anwendungen.
Materialliste.
Bezeichnung Material
Flasche Edelstahl
Gerätekopf
PBT, POM, Silikon,
Messing vernickelt,
PU, Edelstahl
Kopfdichtung TPE
Garniertülle Adapter: PA
Tülle: PP
Kapselhalter PA
Entnahmekolben PA, NBR, Silikon,
Edelstahl
Silikon-Mantel Silikon
DE

18
Sicherheitshinweise.
Die Nichtbeachtung der Sicherheitshinweise
bzw. jeglicher Empfehlungen für die Handha-
bung und die Wartung der iSi Produkte kann
zu einer Fehlfunktion des Systems sowie Ver-
letzungen und / oder Sachschäden führen.
——— Das iSi Gerät ist ausschließlich für die An-
wendung gemäß Gerätedaten zugelassen!
——— Gebrauchsanleitung zur Vermeidung von
Bedienungsfehlern sorgfältig lesen und
aufbewahren!
——— Niemals Gewalt anwenden!
——— iSi Gerät für Kinder unerreichbar
aufbewahren!
——— Ausschließlich befülltes Gerät in Betrieb
nehmen!
——— iSi Gerät niemals außerhalb der min. und
max. Betriebstemperatur lagern bzw.
verwenden!
——— Ausschließlich Gerätekopf und Flasche
desselben Gerätetyps kombinieren!
——— Fremdfabrikate niemals mit iSi Teilen
kombinieren!
——— Gerätekopf und Kapselhalter niemals
schief aufschrauben!
——— Nur original iSi Sahnekapseln verwenden!
——— Beim Einschrauben der Kapsel nicht über
das Gerät beugen!
——— Das Gerät ist ein Druckbehälter! Sturz oder
Beschädigung (wie z. B. Risse oder Verfor-
mungen) machen es zur Gefahrenquelle und
es darf nicht mehr in Betrieb genommen
werden! Das Gerät von der iSi Servicestelle
überprüfen lassen!
——— Gerätekopf von einem unter Druck stehen-
den Gerät niemals abschrauben!

19
——— Hebel niemals als Tragegriff verwenden!
——— Eine ordnungsgemäße Reinigung ist zwin-
gend erforderlich, um eine Verstopfung
des Gerätes zu vermeiden! Prüfen Sie
vor jeder Anwendung, ob das iSi Gerät
ordnungsgemäß gereinigt wurde!
——— Zerlegen des iSi Gerätes nur gemäß der
Illustration zur Reinigung!
——— Handreinigung ausschließlich mit lau-
warmen Wasser und haushaltsüblichen
Handgeschirrspülmittel! Das iSi Gerät ist
nicht spülmaschinengeeignet! Die nicht
zugelassene Reinigung des Gerätekopfes
im Geschirrspüler kann den Kunststoff-
kopf und den Kapselhalter schädigen –
dadurch wird die Sicherheit des Gerätes
beeinträchtigt!
——— Keine Veränderungen am iSi Gerät durch-
führen. Dies führt zum Erlöschen der
Garantie und hat den Haftungsausschluss
zur Folge!
——— Verwenden Sie niemals mehr Kapseln als
angegeben bzw. überfüllen Sie niemals das
Gerät! Dies stellt sicher, dass der maximal
angegebene Betriebsdruck nicht über-
schritten wird!
——— Lässt sich der Druck nicht abbauen,
nehmen Sie bitte mit iSi oder Ihrer
Servicestelle Kontakt auf!
HINWEIS: Vor erstmaligem Gebrauch des iSi
Gerätes Reinigung wie in der Illustration zur
Reinigung angegeben durchführen.
HINWEIS: Um Klümpchenbildung zu vermeiden,
pulvrige Zutaten, Zucker etc. vor dem Befüllen
in etwas Flüssigkeit vollständig auflösen.
Keine Zutaten mit Fruchtfleisch oder Kernen
verwenden!
HINWEIS: Der Silikon-Mantel dient zur
Dekoration. Das iSi Gerät kann auch ohne die-
sen einwandfrei in Betrieb genommen werden.
DE

20
FR
Merci d‘avoir
fait le choix
d‘un siphon iSi.
Veuillez lire avec attention
la notice d’utilisation avant
la première mise en service.