J D Williams 2 Door Cupboard 044 9426 Series User manual

Assembly Instructions - Please keep for future reference
Width - 60.0cm
2 Door Cupboard
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Dimensions
Depth - 34.8cm
Height - 104.6cm
Rev A - 19.06.19
044 xx 9426

Important - Please read these instructions fully before starting assembly
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 4.
Remove all fittings from the
plastic bags and seperate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Care and maintenance
Always lift furniture when
moving it (do not drag)
otherwise the joints may be
damaged.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Dust surfaces with a soft, dry,
lint free cloth.
More stubborn marks can be
removed using a damp
(not wet) cloth. Wipe the
surface dry immediately
using a soft lint free cloth.
Do not use detergants, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these
may damage the surface finish.
To protect the furniture,
position the furniture out of
direct sunlight and away from
direct heat sources such as
radiators and fires.
Do not place the furniture in
excessively dry and humid
conditions.
Do not place hot or cold
objects on the surface, always
use protective mats to avoid
marking the furniture.
Clean spills up immediately
Dispose of all packaging
carefully and responsibly
when assembly complete.
Do Not dispose of packaging
until assembly complete.

Please check you have all the panels listed below
Components -Panels
Divider (96.8x30.7cm)
Code -
Code -
2
Important - Thick lines indicate finished edges
1482
1484
Backpanel (97.8x57.6cm)
Code - 1490
Top (60.0x34.8cm)
1480
Code -
Shelf (36.0x30.6cm)
Code - 1485
Shelf x 2 (19.0x30.6cm)
Code - 1487
Shelf (36.0x30.6cm)
Code - 1486
Left end (96.8x34.6cm) Right end (96.8x34.6cm)
Code - 1488
Bottom (60.0x34.8cm)
Door (96.2x21.3cm)
Code - 1489
Door (67.0x34.4cm)
1481
Code -
Code - 1483

3
Components -Exploded View
1480
1490
1483
1485
1484
1486
1481
1489
1488
1482
1487
1487

70 80 90 100 110 120
010 20 30 40 50 60
mm
130 140 150 160 170
Ruler - Use this ruler to help correctly identify the screws
Please check you have all the fittings listed below
Components-Fittings
Note: The quantities below are the correct amount to complete the assembly, In some case more fittings
may be supplied than are required.
Tools required
4
Small Cross
Headed
Screwdriver
Tape Measure
Eye protection
(when using a
hammer)
Large cam x 10
Code 760001103
Metal dowel x 10
Code 760003004
ABC
D
G
JL
45mm screw x 6
Code 690001075
M
Wooden dowel x 6
Code 770001006 12mm screw x 8
Code 690001008
K
I
22mm screw x 8
Code 690001018
H
Hingeplate x 4
Code 653006000
E
Cube foot x 4
Code 720396000
F
Large Cross
Headed
Screwdriver
Small Hammer Bradawl
L Bracket x 1
Code 760001901
12mm Screw x 2
Code 690001099
Fully cranked 26mm
hinge x 4
Code 652001120
Panel Holder x 6
Code 680003505
Shelf stud x 12
Code 681003001