jbc AM120-A User manual

Adjustable Micro Tweezers
Ref. AM120-A
www.jbctools.com
INSTRUCTION MANUAL

2
C120 Cartridges
(Required but not supplied)
Control Unit
Stand
Ref. AM-SA
Manual ................................................ 1 unit
Ref. 0022381
Packing List
The following items should be included:
Adjustable Micro Tweezers ................ 1 unit
Ref. AM120-A
Adjustable Micro Tweezers
Ref. AM120-A
Adjustable Micro
Tweezers
Ref. AM120-A
Features
INSTRUCTION MANUAL
www.jbctools.com

ø0,7 1,5mm
ø 0,2
5mm
6m m
C120-009 C120-01
0
www.jbctools.com
3
2. Inserting
3. Rotational and Vertical Cartridge alignment
Changing cartridges
1. Removing
Insert the cartridges as far as the mark
for a proper connection. Before inserting,
make sure the cartridges are clean to
ensure the proper functioning of the tool.
Mark
The AM120-A Adjustable Micro Tweezers works with C120 cartridge range.
Find the model that best suits your soldering needs in www.jbctools.com
C120-004 C120-001C120-005 C120-009 C120-010
Compatible cartridges
Slightly turn the wheels to align the cartridges
as required.
Once the alignment has been made, do not forget to fix the cartridges by tightening the fixing
knobs. A single turn of the knob is required to get them fixed.
Also make sure that the cartridges are in good condition so that the tweezers work properly.
!
The tail wheel guarantees that the cartridges
are equally aligned with vertical symmetry.
Unlock the fixing knob and remove the
cartridges. You can use either a flat pliers
(Ref. PLR-195) or the cartridge extractor of
the stand (Ref. AM-SA).

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
Specifications
0 0 2 2 3 81-1118
- Weight: 100 g (0.2 lb)
- Max. power per cartridge: 40W
Complies with CE standards
ESD Safe
www.jbctools.com