jbc HT420-A User manual

Thermal Tweezers
Ref. HT420-A
English
www.jbctools.com

2
Packing list
Features
Thermal Tweezers ..................................... 1 unit
Ref. HT420-A
Manual ........................................................... 1 unit
Thermal Tweezers
Ref. HT420-A
The following items should be included:
Control Unit
Ref. DI, DDE, DME
Stand
Ref. HT-SD
Thermal Tweezers
Ref. HT420-A
C420 Cartridges
(required but not supplied)
Stand Cable
Ref. 0011283
ww w. jbc to ol s.c om

3
WARNING: It is esential to tighten this screw
for the tool to function.
Cartridge electric
connection screw
Alignment
Important: It is esential to insert the
cartridge till the end for a good connection.
Take the mark as reference and check
that both tips of the tweezer coincide.
Consult our wide range of cartridges with more than 250 references in www.jbctools.com.
For special cartridges contact with our distributor.
Changing Cartridges
C420 Cartridge Range
Chip Components
Dual in line
QFP y PLCC Blade Type
Cable stripper
A
A
A
A
ø 3,5mm max.
C420-271 A = 1,5 mm
C420-272 A = 2,6 mm
C420-273 A = 4 mm
C420-274 A = 6 mm
C420-275 A = 8 mm
C420-276 A = 10 mm
C420-277 A = 15 mm
C420-278 A = 20 mm
C420-285 A = 22 mm
C420-279 A = 8 mm
C420-280 A = 11 mm
C420-283 A = 50 mm
C420-281 C420-282
www.jbctools.com

0008868/1114
- Weight without cartridges: 102 g
- ESD Safe
Specifications
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear due to use
or mis-use.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
www.jbctools.com