jbc T210 Series User manual

T210·T245·T470
SOLDERING HANDPIECES
www.jbctools.com

1
2B
CA
2
T210-T245-T470 / SOLDERING HANDPIECES
T210-A Green grip Micro Handpiece (1,5m cable)
T210-PA Blue grip Micro handpiece
Use C210 cartridge range
ESD Safe
Connectable to CD, DI, DD, DDR, DM and RM
T245-A Green grip Handpiece (1,5m cable)
T245-PA Blue grip Handpiece
Use C245 cartridge range
ESD Safe
Connectable to CD, DI, DD, DDR, DM, RM, HD and HDR
T470-A Soft Touch Handpiece (Green grip) with set screw (1,5m cable)
T470-SA Soft Touch Handpiece (Green grip) with set screw (3m cable)
Use C245 and C470 cartridge range
ESD Safe
Connectable to CD, DI, DD, DDR, DM, RM, HD and HDR
T245-NA Nitrogen Handpiece (Green Grip) with set screw (1,5m cable)
Use C245 cartridge range
KN Nitrogen Kit is needed
ESD Safe
Connectable to DI, DD, DDR, DM, RM.
CHANGING THE HANDPIECE’S CARTRIDGE
2. Place the handpiece on top of the new cartridge, press it
slightly down and remove the handpiece from the extractor.
1. Place the handpiece in the extractor and remove the
cartridge.
Press the cartridge into the opening A, B or C:
A. For straight C210 cartridges.
B. For curved C210 cartridges.
C. For C245 cartridges.
T470-FA Foamed Comfort Handpiece (Green grip) with set screw (1,5m cable)
T470-MA Foamed Comfort Handpiece (Green grip) with set crew (3m cable)
Use C245 and C470 cartridge range
Not ESD Safe
Connectable to CD, DI, DD, DDR, DM, RM, HD and HDR

3
CHANGING THE HANDPIECE’S CARTRIDGE
ACCESSORIES
Important.
It is essential to insert the cartridge till the end for
a good connection. Use the mark as reference.
Untigh the screw before changing the cartridge and
tight again once the cartridge is properly inserted.
T470 and T245-NA with set screw.
WARNING: It is esential to tighten this screw for
the tool to function.
Alignment
Nitrogen handpiece T245-NA:
Extract the nozzle before changing the cartridge.
Nozzle T245-NA
Nitrogen handpiece
Fume extractor CC8200 Cable collector
Specially designed for the JBC Series T210,
T245 and T470 handpieces. Easily clips onto
the handpiece and can be quickly removed for
easy maintenance.
Use to declutter work bench.
For T245 and T470 Handpiece:
Ref.F3435
For T210 Handpiece
Ref.F3450
MAINTENANCE
We recomend periodic cleaning of the metal ring and
handpiece support using a solvent.
Due to the nature of its use, the handpiece has a
limited life and may require replacing.
Clean periodically

WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manu-
facturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0008787-0713
TECHNICAL SPECIFICATIONS
HANDPIECES
- T210-A Micro Handpiece.
For high precision work, SMD, etc.
- T210-PA Blue grip Micro Handpiece.
For accuracy soldering work and leaded jobs .
- T245-A Handpiece.
For general soldering work.
- T245-PA Blue handpiece.
For general soldering work and leaded jobs.
- T470-A / T470-SA Handpiece.
For heavy duty soldering applications.
- T470-FA / T470-MA Comfort Handpiece.
Thermally insulated for high thermal demand and prolonged heavy duty soldering applications.
This product should not be
thrown in the garbage.
www.jbctools.com