jbc WS-A User manual

INSTRUCTION MANUAL
High-Temperature
Wire Stripper
Ref. WS-A
INSTRUCTION MANUAL
www.jbctools.com

1. Packing List ....................................................................................................................... 3
2. Safety ................................................................................................................................ 4
3. Features & Connections ................................................................................................. 5
4. Changing Cartridges ....................................................................................................... 6
5. Cartridge Range ............................................................................................................... 6
6. Adjustable Strip Gauge ................................................................................................... 7
7. Operation ........................................................................................................................... 8-10
8. Control Process ................................................................................................................ 11
9. Maintenance ...................................................................................................................... 12
10. Notes ................................................................................................................................ 13
10. Specifications .................................................................................................................. 14-15
Index
Page
2

Ref. WS-A
INSTRUCTION MANUAL
www.jbctools.com
Manual ............. 1 unit
Ref. 0022824
Packing List
The following items are included:
WS Control Unit ...............1 unit
Ref. WS-1A (120V)
WS-2A (230V)
Stand ..................................1 unit
Ref. WS-SA
High Temperature
Stripper Tweezers.........1 unit
Ref. WS440-A
High-Temperature
Wire Stripper
Ref. WS-A
Metal Brush.......................1 unit
Ref. 0022793
Power Cord ......................1 unit
Ref. 0009417 (100V/120V)
0009401 (230V)
Stand cable ................... 1 unit
R ef. 0 01128 3
Cartridge Holder .............1 unit
Ref. SCH-A
INSTRUCTION MANUAL
www.jbctools.com
3
www.jbctools.com

Safety
Warning
- Do not touch the blade or the metal parts arround.
- Do not allow the blade be close to flammable materials.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when
working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physi-
cal, sensory or mental capabilities or lack of experience provided that they have been given adequa-
te supervision or instruction concerning use of the appliance and understand the hazards involved.
- Maintenance must not be carried out by children unless supervised.
- Place the tool on the stand when is not in use.
- Turn off the power when not in use, changing parts or storing.
Caution
- Do not use the Wire Stripper for other applications than wire stripping.
- Do not modify or customize the Wire Stripper.
- Do not hit the blade against workbench to eliminate stripped insulation debris, This behavior
would damage the blade.
- Remove power from the tool by holding the plug, not the wires.
- Be careful with the fumes produced when stripping. We recomend to use our fume extractor.
4

Features & Connections
Power Socket
WS Control Unit
Stand
Ref. WS-SA
Stand cable
Ref. 0 0 1128 3
Equipotential connector
USB Connector
Main switch
Fuse
High-Temperature Wire
Strippers Tweezers
Ref. WS440-A
W440 Cartridges
(Required but not
supplied)
www.jbctools.com
5

26
30
28
AWG
32
36
24
AWG
26
28
WARNING: It is esential to tighten this screw
for the tool to function.
Cartridge electric
connection screw
Alignment
Important: It is esential to insert the cartridge
till the end for a good connection.
Take the mark as reference and check that
both tips of the tweezer match.
For special blade cartridges contact us on [email protected]
Changing Blande Cartridges
Cartridge Range
W440 blade cartridges, due to its design, has a proper centering to ensure a good
functionality. Before tightening the screw, fix the cartridges in working position.
Blade Cartridges alignment
W440-023 W440-025
The WS440-A works with W440 blade cartridges. Find the model that best suits your soldering needs
on www.jbctools.com.
Flat Blade (no holes)
Ref. W440-021
20
24
22
18
(mm)
(0.405)
(0.255)
(0.321)
(0.202)
(0.127)
(0.511)
(mm)
(0.812)
(0.511)
(0.644)
(0.405)
(0.321)
(1.020)
6

Adjustable Strip Gauge
Adjust the strip gauge according to your stripping requirements.
Strip Gauge Knob Strip Gauge
www.jbctools.com
7

Operation
The WS incorporates predeterminated power levels and it also feature a customized working
mode. It allows you to work on wire insulations made of thermoplastics and thermostable
materials such as teflon*, kapton*, silicone, rubber, etc.
Programs included:
Insulation Material Symbol Power Level
Polyvinyl Chloride PVC 6%
Polyethylene PE 7%
Nylon PA 10%
Kynar ² PVDF 16%
Tefzel ¹ ETFE 17%
Teflon ¹
FEP 16%
PFA 21%
PTFE 40%
Ethylene Propylene
Rubber EPM/EPR 44%
Silicone Rubber SI 51%
Kapton ¹ PI 90%
ThermoplasticsThermostable
¹ Registred Trade Marks of DuPont
² Registred Trade Marks of Arkema
8

Selected temp. 560
o
C
Power 75%
Kapton
®
PI
90%
Power 59%
Custom 68%
1. Select Material Mode
How to Operate
After switching on the power, firstly you
have to select the working mode. Press the
screen buttons UP and DOWN to chose
between all the materials.
If you want to work on a customized
mode, press OK and then use the UP and
DOWN buttons to set up your own power
configuration.
2. Custom Mode
Down
Button
Up
Button
OK
Button
www.jbctools.com
9

Power 75%
Kapton
®
PI
90%
Power 35%
Kapton
®
Sleep
90%
PI
Power 0%
Kapton
Hibernation
90%
PI
®
Once you choose any Operation Mode, you are able to begin the working process.
· Set Sleep delay
(from 0 to 9 min or no Sleep)
· Change Hibernation delay
(from 0 to 60 min or no
hibernation)
1. Work 2. Sleep 3. Hibernation
When the tweezer is lifted
from the stand the tip will heat
up to the selected material
configuration.
When the tweezeer is in the
stand, the power falls after a
specified time.
After longer periods of
inactivity, the power is cut off
and the tool cools down to
room temperature.
· Select material power level
10

Power 75%
Kapton
Main menu
Exit
1 Fix level ---
2 Sleep delay 0min
3 Hibernation delay 10min
Tool 245
Counters
1 Plugged hours 0
2 Working hours 0
3 Sleep hours 0
4 Hibernation hours 0
Back
5 No tool hours 0
6 Sleep cycles 0
®
PI
4 Beep ON
5 PIN ON
6 Change PIN
7 Counters
8 Program version
9 Reset settings
90%
Menu Screen
Press and hold button to acces the Main Menu
Default PIN: 0105
Selected Material
Work Screen
Control Process
Next Material
Power Level
Previous Material
Instant Power
www.jbctools.com
11

Maintenance
Fuse
- Replace any defective or damaged pieces. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Before carrying out maintenance or storage, always allow the equipment to cool and unplug the stand
from the station and the tool.
- Clean the station screen with a glass cleaner
or a damp cloth.
- Use a damp cloth to clean the casing, the
stand and the tool. Alcohol can only be
used for cleaning the metal parts.
- Periodically check that the metal parts of the
tool and stand are clean so that the station
can detect the tool status.
- Maintain tip surface clean in order to ensure
a correct stripped wire.
- Periodically check all cables.
- Replace a blown fuse as follows (see
specification chart) :
1. Pull off the fuse holder and remove the
fuse. If necessary use a tool to lever it off.
2. Press the new fuse into the fuse holder and
replace it in the station.
Clean
perodically
12

Notes
www.jbctools.com
13

产品中有害物质的名称及含量
有害物质含量表
部件名称
有害物质
铅(Pb) 汞(Hg) 镉(Cd) 六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
烙铁头 O O O O O O
手柄 O O O O O O
电源线 O O O O O O
主机 O O O O O O
电源插座 O O O O O O
保险丝 O O O O O O
主开关 O O O O O O
电位连接 X O O O O O
变压器 O O O O O O
线路板 X O O O O O
O 表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572 规定的限量要求以下。
X 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
14

Specifications
High Temperature Wire Stripper
WS-1A / WS-2A
WS-1A120V 50/60Hz. Input fuse: 1.25A. 5x20mm Output: 15V.
WS-2A 230V 50/60Hz. Input fuse: 0.63A. 5x20mm Output: 15V.
- Temperature Max : 800 ºC (1472 °F)
- Idle Temp. Stability (still air): ±1.5 ºC / ±3 ºF
- Power: 75W
- Ambient operating temp: 10 to 50 ºC (50 to 120 ºF)
- Connections:USB-B
- Control Unit Weight: 2.2 kg (4.85 lb)
- Control Unit Dimensions: 90 x 105 x 180 mm (3.5 x 4.1 x 7.1 in)
- Total weight: 4.6 kg (10.1 lb)
Complies with CE standards.
ESD protected.
www.jbctools.com
15

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
www.jbctools.com 0022824-0919