2
CL9885 / TIP CLEANING RANGE
Very effective
cleaning method.
Leaves a small
layer of solder on
the tip preventing
oxidation between
cleaning and
rewetting.
Wet cleaning method
Very soft and
temperature resistant
receptacle allows
tapping and wiping of
the tip to eliminate the
excess of solder
Inox wool stronger cleaning
method than brass wool.
The metal brush differs from the
cleaning wool in that it is a little
bit more agressive on the tip.
It therefore cleans the tip very
well but it should be used
gently.
A long proven method of
chemically cleaning and
retinning at the same time.
It should be used when the
above methods fail and a very
active cleaning method is
needed.
CL6205 INOX WOOL CL6220 BRUSHES TT-A TIP TINNER-CLEANER
The most complete cleaning accesory, allows you to choose between 3 diferent cleaning methods, metallic
wool, metal brush and sponge.Use the integrated wiper to remove the excess of solder from the tip, you
can tap the tip on the wiper profile or you can wipe any posible particle sticked on the tip using the slots.
Due to its weight and antislip bumpers, it is totally self portable, there is no need to hold with a hand while
you are cleaning the tip.
CL6210 BRASS WOOL
S0354 SPONGE
CL0236 WIPER
OPTIONAL
