jbc Pick & Place User manual

Pick & Place
Ref. T260-A
www.jbctools.com

Ø 0.7 - 0901512 (x2) black
Ø 0.9 - 0901520 (x2) yellow
Ø 1.2 - 0901538 (x2) pink
Ø 0.8 - 0861540 (x2) green
Ø 0.9 - 0861560 (x2) yellow
Ø 1.2 - 0861580 (x2) pink
Ø 4.3 - 0940112 (x2)
Ø7- 0940111 (x2)
Ø 10 - 0940110 (x2)
Packing List
Pick & Place
Ref. T260-A
Straight needles
Ref. 0901546
Bent needles
Ref. 0861660
Cups
Ref. 0940163
Manual
2
T260-A
PICK & PLACE
ww w. jb ct oo ls .c om

The pen is connected to the suction plug of the station.
The suction cups can be adjusted to the needles in order to make the
placement of SMD of different
sizes on boards easier.
These accessories allows the
adjustment to weight and size
of any type of component.
When you assemble the
suction cup with the needle,
you should avoid the needle
to stick out of the lower part.
Maximum working temp.:
250ºC / 482ºF
Features
Working
ww w.jbctools.com
3

www.jbctools.com
0009134-0614
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic
equipment at the end of their life must be collected and returned to
an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this
equipment against all manufacturing
defects, including the replacement
of defective parts and labour.
Warranty does not cover product
wear due to use or mis-use.
In order for the warranty to be
valid, equipment must be returned,
postage paid, to the dealer where it
was purchased.