JCROffroad 6TH GEN BRONCO User manual

6TH GEN BRONCO
PRERUNNER BOLT-ON HOOP..............2
6TH GEN BRONCO
BULL BAR BOLT-ON HOOP...................6
TABLE OF CONTENTS

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.
6TH GEN BRONCO
PRERUNNER
BOLT-ON HOOP
INSTALL INSTRUCTIONS

INCLUDED HARDWARE
10x
M8 X 30mm
Flanged Hex Head

INCLUDED PARTS
1x

1Start by removing the ten bolts circled below.
ASSEMBLY
2Once those are out of the way, place the tube onto the bumper and install
it into the holes you just cleared using the provided M8 bolts. The easiest
way to do this is to start with the center bolts and work your way out. That
way it is much simpler to line up each end. If you are sill struggling to get
everything lined up, you can adjust the position of the caps on either end
of the bumper as well.

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.
6TH GEN BRONCO
BULL BAR
BOLT-ON HOOP
INSTALL INSTRUCTIONS

INCLUDED HARDWARE
10x
M8 X 30mm
Flanged Hex Head

INCLUDED PARTS
1x

1Start by removing the ten bolts circled below.
2Once those are out of the way, place the tube onto the bumper and install
it into the holes you just cleared using the provided M8 bolts. The easiest
way to do this is to start with the center bolts and work your way out. That
way it is much simpler to line up each end. If you are sill struggling to get
everything lined up, you can adjust the position of the caps on either end
of the bumper as well.
ASSEMBLY