JCROffroad VRK-SAM User manual

ROOF RACK SIDE
ACCESSORY MOUNT
Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
INSTALL INSTRUCTIONS
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.

INCLUDED HARDWARE
N/A
Note: Some Victory 4x4/JCR Oroad/SquatchProof products share hardware kits. Any
extra hardware you may recieve that is not listed below can be repurposed or discarded.
INCLUDED BOLT PACK(S) N/A

INCLUDED PARTS
1x
Accessory Mount

1.To install, choose the location on your rack where you want to mount your
accessory mount, it must mount to (2) of your crossbars. Remove the (4)
1/4”-20 bolts that are threaded into the crossbars (2 from each).
INSTALLATION
2.Once the hardware is removed, bolt your accessory mount onto your rack
in the same location using the same hardware that was removed, as shown
in the orientation below.

3.You can adjust your mount le to right on the slot to get it in the postion
you want, once in position make sure to tighten down all (4) of your bolts
to complete your install. You are now equipped with an accessory mount
to mount Quick-fist mounts or any gear you may have!
INSTALLATION