JCROffroad BR6-UPRS Configuration guide

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.
4 DOOR 6TH GEN BRONCO
UPPER SHELF
INSTALL INSTRUCTIONS

INCLUDED HARDWARE
8x
1/4”-20 X 3/4”
Button Head
8x 1/4”-20
Serr. Flange Nut

INCLUDED PARTS
2x1x

1Start by loosely installing the mounts onto the Rear Window MOLLE
Panels. To do so, line the bracket holes with the third set down of MOLLE
panel holes and insert (2)1/4”-20 button heads through the bracket and
hand tighten 1/4”-20 flange nuts through the back side of the window
MOLLE on both sides.
INSTALLATION

INSTALLATION
2Next, place the Upper Shelf on top of the brackets and loosely bolt it in
using (2) 1/4”-20 X 3/4” button head bolts and 1/4”-20 serr. flange nuts per
side. Once it is loosely installed, adjust the position of the basket until it is
where you want it. Then, finish by tightening everything fully into place.