JCROffroad 6TH GEN BRONCO Configuration guide

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road
products. Be sure to rate and review our product online. If you have any questions or are missing parts, please
don’t hesitate to call us at 269-353-1184!
Please read the mounting instructions below carefully before attempting to install.
Be sure to check out the install video on the product page, if available.
6TH GEN BRONCO
PINCH WELD COVERS
INSTALL INSTRUCTIONS

INCLUDED HARDWARE
12x
4 DOOR 2 DOOR
5/16”-18 X 3/4"
Button Head
5/16”-18
Serr. Flange Nut
8x
5/16”-18 X 3/4"
Button Head
4x
25mm M6
Button Head
12x
5/16”-18
Serr. Flange Nut
4x
25mm M6
Button Head
8x

INCLUDED PARTSINCLUDED PARTS
2x 2x
4 DOOR
2x
2 DOOR

1To start, remove the two bolts in the front of the pinch seam on both sides
of the vehicle.
ASSEMBLY
2To install, simply place the metal plates onto the outside of the pinch seam
and bolt them on using the provided hardware. The M6 bolts go in the two
front most holes that you removed the factory bolts from. The
5/16”-18 X 3/4” and 5/16”-18 serr. flange nuts are used in all of the other
holes.
4 DOOR
2 DOOR