Jetson Element User manual

ELEMENT
ELECTRIC FOLDING SCOOTER

TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Assembly 3
Charging the Battery 4
Unfolding the Element 5
Operating the Element 6
Speed Settings 7
Settings Mode 8
Riding the Element 9
Using the Thumb Throttle 10
Using the E-Brake 11
Using the Rear Foot Brake 12
Using the Kickstand 13
Folding the Element 14
Care and Maintenance 15
Safety Warnings 16

1. WHAT’S IN THE BOX
1
3
4
56
7
89
10
1. FRONT TIRE
2. RELEASE LEVER
3. HEADLIGHT
4. HANDLEBAR
5. DECK
6. REAR FOOT BRAKE
7. REAR TIRE
8. KICKSTAND
9. CHARGER
10. CHARGING CABLE
2

2. FEATURES & SPECS
• Product Dimensions: 37.01” x 17.91” x 44.69”
• Weight Limit: 220 lbs.
• Product Weight: 18.7 lbs.
• Recommended Age: 13+
• Tire Size: 6”
• Max Speed: Up To 15 mph
• Max Range: Up To 10 Miles
• Battery: 24V, 5.0Ah Lithium-Ion
• Motor: 250W Hub Motor
• Charger: 100-240V
• Charge Time: Up To 4 Hours
• Climbing Angle: Up To 15°
• Frame Material: Aluminum
ELEMENT

3. ASSEMBLY
Connecting the Handlebars:
• Look at the inside of each Handlebar and see which is
labeled L (left) and R (right).
• Place L into the left side and R into the right side (left and
right directions are as though you are standing on the Deck).
• Tighten by turning the Handlebars until they can no longer
turn. Make sure the Handlebars are tight and secure.

4. CHARGING THE BATTERY
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Element while it’s charging (it needs its rest)
• Charge the battery until it is fully charged - up to 4 hours
• Replace the cover over the Charging Port when done
• Remember to have fun!
CHARGING INDICATOR ON THE CHARGER:
Red Light: Battery is charging
Green Light: Charging is complete
Charging Port

5. UNFOLDING THE ELEMENT
5.1
5.2 5.3
Unclip
Unclip the hook from the Rear
Foot Brake
Lift Handlebars away from Deck Lock the Release Lever by lifting it
up until it clicks.
Release
Lever

5.4 5.5
Make sure the Release Lever and
Handlebars are secure.

6. OPERATING THE ELEMENT
LED Display
• Powering On/Off - Hold the Power Button for 3 seconds to turn the Element
on or off.
• Light Function - Once the Element is on, tap the Power Button to turn on
the headlight and taillight. The light symbol will show on the LED Display.
• LED Display - Shows current speed and battery life remaining.
Settings
Button
Power
Button

7. SPEED SETTINGS
Press the Settings Button to cycle through the speed settings.
• P0 - No assistance from the motor
• P1 - Max speed up to 6 mph
• P2 - Max speed up to 11 mph
• P3 - Max speed up to 15 mph
Settings
Button