John Lewis Century Wireless Charging Table Lamp User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
Aftercare and
Troubleshooting
Max. power: 9W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 1.39kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the finish.
Replace bulbs from John Lewis or estabished brand of the same type and
compatibility.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities across
the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
Century Wireless Charging Table Lamp
USER GUIDE
Please ensure all screws and small pieces are properly tightened to the product.
When changing a bulb, always switch off the mains and allow the bulb to cool
down before handling.
A bulb’s watt rating indicates how much energy it uses. The higher the watt,
the more energy it requires. Lumens is a measure of brightness. The higher
the number of lumens, the brighter the light.

01 02
Description Image Quantity Parts list
Introduction Thank you for purchasing this Century Wireless Charging
Warnings This product is Class II.
This lamp is for indoor use only.
The supply cord cannot be replaced. If the cord is damaged, the table lamp should be
destroyed in order to avoid a safety hazard.
The bulb is not included with this lamp. Please visit your local store to purchase
the bulb prior to assembly.
1 x 9 watt LED Bulb
Bulb replaceable
Bulb not included
Recommended
bulb
Product assembly
1
1 PC
Untie the tie securing cable before use.
off with the rocker switch.
Note: The base is equipped with wireless charging.
Line up the middle of the smartphone with the
middle of the charging pad. Your device will indicate
the charging process has begun. Turn the lamp on and
A
B
ALamp Body
Carefully unpack the carton, making sure all parts are
included before assembly. Place lamp parts on a flat
surface.
E27 LED Bulb
Install bulb into the socket of the lamp base (bulb not
Table Lamp.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
included).