John Lewis Tobias nickel User manual

fixi
Recommended bulb
1 x 4-8W ES energy efficient LED classic bulb
or
1 x 28W ES eco halogen classic bulb
Bulb not included
Specifications
Max. power: 40W
Voltage: 220-240V~50/60Hz
IP rating: 20
Weight: 0.47kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate instore
take back, but as members of the Distributor Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it to
your nearest collection facility or for further details contact your local council
or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition.
However, should any parts be damaged or missing please e-mail
[email protected].uk
Trouble Shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
User manual
Tobias nickel
Wall light
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China

Thank you for purchasing this Tobias nickel wall light. Assembly
Please read the instructions carefully before use to ensure safe and satisfactory
operation of this product.
Please keep these instructions for future reference.
Warnings!
This product is Class I and must be earthed.
This fitting should be fitted in accordance with IEE Regulations and the Building
Regulations. If in any doubt, or where required by law, consult a competent
person who is registered with an electrical self-certification scheme. Further
information is available online or from your Local Authority. To prevent electric shock,
switch off at the mains supply before installing or maintaining this fitting. Ensure other
persons cannot restore the electricity supply without your knowledge.
If you are in any doubt, please consult a qualified electrician.
If replacing an existing fitting, make a note of the connections.
Always use the correct type and power bulb. Never exceed the power stated.
When changing a bulb, always switch off at the mains and allow the old bulb to cool
down before handling. Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use
Care instructions
We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the finish.
Indoors use only.
Replace bulbs from John Lewis or established brand of the same type and compatibility.
Parts list
Qty Qty
A 2 D 1
B 2 E 1
C 1 F 1
Step 1
Step 2
Ensure the mains electricity supply switched off at
the fuse board.
Step 1
Ensure that the bracket (supplied) is fixed to a
wooden joist, or use a suitable fixing to the wall
which will support the weight of the fitting.
Step 2
Connect cables or terminals as shown below.
Check all wires are tight in the terminal block and
no loose strands are left out.
Cover with insulating tape (not included)
Step 3
Attach wall light to fixing bracket as shown in the
diagram.
Step 4
Attach the correct type and wattage bulb to the
lamp holder (bulb not included).
The maximum power indicated must not
be exceeded.
Switch on the electricity supply at the fuse board.
Step 1
Step 2
Step 3
Step 4