John Lewis Brandon User manual

Recommended bulb (not included)
1x 6W ES LED GLS
or
1x 28W ES Eco halogen GLS
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully.Do not exceed the rated power stated or use a different shape bulb
from that indicated on the fitting.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China 24/01/2020
We have taken great care to ensure that this product reaches you in perfect condition.
However, should any parts be damaged or missing please contact the Product Helpline on
[phone].
This symbol indicates that this product should not be treated as normal household waste
and it should be recycled. John Lewis do not operate instore take back, but as members of the
Distributor Trade Back scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further details contact your
local council or visit www.recycle-more.co.uk.
User manual
Brandon
Floor light
Specifications
Max. power: 40W
Voltage: 240V, 50Hz
IP rating: IP20
Weight: 3.8kg
Please keep these instructions for future reference.

Assembly
Refer to assembly drawing opposite. Carefully unpack the carton, making sure all the parts are
present before assembly. Gently pull away any protectors from the ends of the tubes.The fitting has
been packaged as five separate parts to prevent damage during transit; please ensure all packaging
has been removed
Step 1
Screw top assembly (4) on to tube (3), then screw on tube (2) and (1).
Take care not to trap the cable or cross the thread, firmly tighten the tube by hand.
Check all joints are tight.
Step 2
Pull any excess cable through from the underside of the base. Turn completed assembly
anticlockwise approximately 6 times (Turning the tube anticlockwise first, ensures that the cable
will straighten when tubes are fully assembled). Screw assembly in a clockwise direction on to the
base.Take care not to trap the cable or cross the thread, firmly tighten the tube by hand.
Step 3
Gently pull the remaining slack cable through from the underside of the base.Tighten cable cord
screw (X).
Step 5
Fit the bulb as per the instructions overleaf.
Do not exceed the wattage as recommended as this may cause damage to the light fitting.
Step 6
Your standard lamp is now ready to use. Switch on using the floor switch.
Thank you for purchasing this Brandon floor light. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage
the finish.
Warnings!
This is a Class 1I product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before cleaning or adjusting.
If you are in any doubt, please consult a qualified electrician.
Parts list Image Qty
Light tting 1