John Lewis DUO GLASS SHELF FLOOR LAMP User manual

DUO
GLASS SHELF FLOOR LAMP
USER GUIDE
5
YEARS
Aftercare and
Troubleshooting
5 year guarantee At John Lewis & Partners we test every light to high quality standards so we
are able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities across
the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
Please retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Please ensure all screws and small pieces are properly tightened to the product.
When changing a bulb, always switch off the mains and allow the bulb to cool
down before handling.
A bulb’s watt rating indicates how much energy it uses. The higher the watt,
the more energy it requires. Lumens is a measure of brightness. The higher
the number of lumens, the brighter the light.
We recommend cleaning with a soft dry cloth. Do not use abrasive materials
as these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and compatibility.
Max. power: 60W
Voltage: 220–240V~50Hz
IP rating: 20
Weight: 13.6 kg

Thank you for purchasing this Duo Glass Shelf Floor
Lamp. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
A
D
E
L
M
G
B
A
H
I
C
C
D
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
2 PCS
2 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
A
B
C
D
E
F
G
I
H
J
Description
Base
Tube
Tube
Tube
Allen Key
Hex Screws
Tubes
Small Glass Shelf
LShade
KLarge Glass Shelf
Tube
MSocket Ring
Tube
Image Quantity
Parts list
Recommended
bulb
Introduction
Warnings
01
10 watt E27 LED bulb
Bulb is replaceable
Bulb not included
This lamp is for indoor use only.
This product is Class II.
The supply cord cannot be replaced. If the cord is damaged, the floor lamp should
be destroyed in order to avoid a safety hazard.
Always use the correct type and rated power bulb. Never exceed the rated power
stated.
Dispose of used bulbs carefully.
02
Product assembly
5. Hex screw (G) comes pre-
assembled to the curved
tube (E). Before placing the
curved tube (E) onto the
tube (D), please unscrew
this hex screw (G).
6. Place the curved tube (E)
onto tube (D), then secure
the tubes together by
screwing hex screw (C) back
into curved tube (E) with
allen key (F) until tight.
8. Screw second tube (H)
onto base (A), then screw
tube (J) onto tube (H).
Then place glass top (K)
onto tube (J) and screw
down to tighten.
1. Carefully unpack the carton,
making sure all parst are
included before assembly.
Place lamp parts on a flat
surface.
2. Screw tube (B) onto base
(A) until tight.
3. Screw tube (C) onto tube
(B) until tight.
4. Screw tube (D) onto tube
(C) until tight.
7. Screw tube (H) onto base
(A), then place glass top
(I) onto tube (H) and
screw down to tighten.
9. Socket ring (M) comes
pre-assembled to the
socket. Before placing
the shade onto the
socket, please unscrew
this socket ring.
10. Place shade (L) onto
socket and tighten it with
socket ring (M).
A
H
K
J
NOTE: The Arc lamp should
face forward with the arm
reaching over the base (see
diagram below).
F