John Lewis Trumpet User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partner
Technical Support on 03301 230106.
Aftercare and
Troubleshooting
Max. power: 3 x 6W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 6.16kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the nish.
Glass parts - Remove and wash in warm water or just use a damp cloth. Do not
use abrasive materials as these will damage the nish.
This symbol indicates that this product should not be treated as
normal household waste and it should be recycled. John Lewis & Partners
do not operate instore take back, but as members of the Distributor Take
Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or
for further details contact your local council or visit www.recycle-more.
co.uk.
TRUMPET FLOOR LIGHT
USER GUIDE
28/10/2020

01 02
Parts list
Introduction Thank you for purchasing this Trumpet Floor Light.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings This is a Class II product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before changing the lightbulbs, cleaning or
removing shades.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
If you are in any doubt, please consult a qualied electrician.
Recommended bulb (not included)
3 x 6W SES LED Energy Efcient Golf Ball
When changing a bulb, always switch off at the mains and allow the bulb to cool
before handling. Dispose of used bulbs carefully. Do not exceed the rated power
stated or use a different shape bulb from that indicated on the tting.
Recommended bulb
Product assembly
1
5
2
Screw top assembly (A) on to tube (B),
Take care not to trap the cable or cross the thread,
rmly tighten the tube by hand.
Check all joints are tight.
3
Pull any excess cable through from the underside
of the base. Turn the assembly (A+B) anticlockwise
approximately 6 times (Turning the tube anticlockwise
rst, ensures that the cable will straighten when tubes
are fully assembled).
Screw assembly (A+B) in a clockwise direction on to
the base. Take care not to trap the cable or cross the
thread, rmly tighten the tube by hand.
To attach the glass shades remove shade ring (E) from
threaded body (D), place glass shade over threaded
body (D) and replace the shade ring (E), tighten with
light pressure.
Fit the recommended bulb as mentioned overleaf.
B
A
C
Refer to assembly drawing opposite. Carefully unpack
the carton, making sure all the parts are
present before assembly. Gently pull away any
protectors from the ends of the tubes. The tting has
been packaged as three separate parts to prevent
damage during transit; please ensure all packaging has
been removed.
ShadesLight tting
4
Gently pull the remaining slack cable through from the
underside of the base.
6Your oor lamp is now ready to use. Switch on using
the foot switch.
D
E
13