John Lewis Penelope User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partner
Technical Support on 03301 230106.
Aftercare and
Troubleshooting
Max. power: 40W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 1.51kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the nish.
This symbol indicates that this product should not be treated as
normal household waste and it should be recycled. John Lewis & Partners
do not operate instore take back, but as members of the Distributor Take
Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or
for further details contact your local council or visit www.recycle-more.
co.uk.
PENELOPE TOUCH LAMP
USER GUIDE
23/11/2020

01 02
Parts list Qty
Introduction Thank you for purchasing this Penelope touch lamp.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before changing lightbulbs, cleaning or
removing shade. Always take care when handling lightbulbs to avoid injury in case of
breakage.
If the exible external cable becomes damaged, it should only be replaced by the
manufacturer or suitably qualied person.
This product is Class II (double insulated) and must not be earthed.
This product is Non-Dimmable.
Recommended bulb (not included)
1 x 40W (Max.) E14/ SES Golf ball, or
1 x 28W E14/ SES Eco Halogen Golf ball, or
1 x 7W E14/ SES LED Energy Efcient Golf ball
When changing a bulb, always switch off at the mains and allow the bulb to cool
before handling. Dispose of used bulbs carefully. Do not exceed the rated power
stated or use a different shape bulb from that indicated on the tting.
Recommended bulb
Product assembly
1
To attach the shade remove the shade ring (A) from the
threaded body (B).
Place the silicone seal (D) in the centre of the indent on
the shade (C), and place the shade over the threaded
body.
Holding the shade in place with one hand, screw the
shade ring (A) back in place over the threaded body (B)
with gentle pressure, ensuring that the silicone seal is not
distorted.
Adjust the shade if necessary and tighten the shade ring
more rmly to secure the grip.
Fit a recommended bulb. Your light is now ready to use.
The light can be switched on/off by touching the central
touch point (F).
Direction of the light can be adjusted with knuckle (E).
Metal shade may get hot during use, so you should
only adjust the light after it has been switched off for 10
minutes.
B
A
C
Refer to assembly drawings on the page opposite.
Carefully unpack the carton, making sure all the parts
are present before assembly.
Light tting 1
Shade (C)
Silicone seal
(D)
1
1
2
D
E
3
F