John Lewis Grayson Compact User manual

Recommended bulb (not included)
1 x 9 Watt ES energy efcient LED GLS
or
1 x 42 Watt ES eco halogen GLS
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully. Do not exceed the rated power stated or use a different shape bulb
from that indicated on the tting.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China 18/10/2019
We have taken great care to ensure that this product reaches you in perfect condition.
However, should any parts be damaged or missing please contact the Product Helpline on
[phone].
This symbol indicates that this product should not be treated as normal household waste
and it should be recycled. John Lewis do not operate instore take back, but as members of the
Distributor Trade Back scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further details contact your
local council or visit www.recycle-more.co.uk.
User manual
Grayson Compact
Floor light
Specications
Maximum power: 60W
Voltage: 240V, 50Hz
IP rating: IP20
Weight: 10kg
Please keep these instructions for future reference.

Assembly
Refer to assembly drawing opposite. Carefully unpack the carton, making sure all the parts are present before
assembly. Gently pull away any protectors from the ends of the tubes.
Step 1
Taking care not to trap any cables, and to avoid cross-threading, connect together the sections of stem (1-2)
and (3-4). Secure using the screws at the end of each stem section. The screws are different sizes (see parts
list) and are pre-tted. Carefully remove the screws and ret them in the same holes.
Step 2
Gently pull any excess cable through the side of the base tube (5) and secure using the screws (6).
Step 3
Remove the shade ring from the lampholder, place the shade (7) over the lampholder and ret the shade ring (8).
Tighten to secure the shade in place.
Step 4
Fit the bulb (9) as recommended over-leaf. Do not exceed the recommended rated power as this may cause
damage to the light tting. Please note: the lampholder rotates up to 170o.
Step 5
Your oor lamp is now ready to use. Switch on using the inline foot switch (10). The arm can be adjusted with
the metal knob (11).
Thank you for purchasing this Grayson Compact Floor Light. Please read the instructions carefully before
use to ensure safe and satisfactory operation of this product.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the nish.
Warnings!
This is a Class 1I product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before cleaning or removing the shade.
Your standard lamp has been packaged as separate parts to prevent damage during transit.
If you are in any doubt, please consult a qualied electrician.
2 x countersunk
2 x M4 x 4
2 x M5 x 4
6
4
2
7
8
9
0°
170°
COUNTERSUNK
1
11
3
5
M5*4
M4*4
10