John Lewis TONY User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partner
Technical Support on 03301 230106.
Aftercare and
Troubleshooting
Max. power: 40W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 0.460kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the nish.
This symbol indicates that this product should not be treated as
normal household waste and it should be recycled. John Lewis & Partners
do not operate instore take back, but as members of the Distributor Take
Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or
for further details contact your local council or visit www.recycle-more.
co.uk.
TONY WALL LIGHT
USER GUIDE
27/11/2020

01 02
Parts list Image Qty
Introduction Thank you for purchasing this Tony wall light.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings This is a Class II product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
This product is designed to be xed to a wall and connected to a mains power outlet
via the supplied 3-pin plug. Do not remove the plug and connect by other means.
IMPORTANT: Children can become entangled in loose cable. Ensure excessive loops
of cable are secured against the wall using the ttings supplied. Do not use
this product in children’s bedrooms.
Recommended bulb (not included)
1 x 6W SES LED Energy Efcient Golf Ball bulb, or
1 x 28W SES Eco Halogen Golf Ball bulb, or
1 x 40W (Max.) E14 Golf
When changing a bulb, always switch off at the mains and allow the bulb to
cool before handling. Dispose of used bulbs carefully. Do not exceed the rated
power stated or use a different shape bulb from that indicated on the tting.
Recommended bulb
Product assembly
1Select the mains power outlet you wish to connect
the plug to and hold the product in place on the wall
ensuring it is level, mark the xing hole positions.
Check there are no mains cables or pipes beneath
the wall. Drill the holes and t the supplied wall plugs
(A) - which are suitable for masonry only. This product
is not suitable for use in children’s bedrooms.
Fix the product (B) to the wall using the supplied
screws (C).
To keep the cable tidy, this product is supplied with
3 cable retaining clips. Decide on the cable position.
Recommended placing is 1 clip every 50cm. Using the
retaining clips as a template mark and drill the position
of the xing holes.
Be careful not to damage any wiring or pipes.
Place the clips around the cable and x in place
using the supplied small screws (D).
A
Light tting 1
Retaining clips 3
Screws 2
Small screws 3
Wall plugs 2
Small wall plugs 3
2Fit the recommended bulb per specications.
Plug into a mains outlet. Your wall light is now
ready to use. Switch on using the inline switch.
Note: The shade may get hot. Only adjust after
the tting has been switched off for ten minutes.
D
B
C