John Lewis HUXLEY User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
Aftercare and
Troubleshooting
Max. power: 4W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 0.62kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the finish.
Replace bulbs from John Lewis or estabished brand of the same type and
compatibility.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities across
the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
HUXLEY TABLE LAMP
USER GUIDE
Please ensure all screws and small pieces are properly tightened to the product.
When changing a bulb, always switch off the mains and allow the bulb to cool
down before handling.
A bulb’s watt rating indicates how much energy it uses. The higher the watt,
the more energy it requires. Lumens is a measure of brightness. The higher
the number of lumens, the brighter the light.

01 02
Description Image Quantity Parts list
Introduction Thank you for purchasing this Huxley Table Lamp.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings This product is Class II.
This lamp is for indoor use only.
The supply cord cannot be replaced. If the cord is damaged, the table lamp should be
destroyed in order to avoid a safety hazard.
Do not over tighten the glass shade. If the shade is screwed down too tight the glass
could be break.
The bulb is not included with this lamp. Please visit your local store to purchase
the bulb prior to assembly.
G9 LED Bulb only
Glass Shade 1 PC
1 PC
Lamp Base
1 x 4 watt energy efficient G9 LED
Bulb replaceable
Bulb not included
Recommended
bulb
Product assembly
1
3
2Install the G9 LED bulb into the socket of the lamp
base (C).
Screw glass shade (A) onto the socket of lamp base (C).
Note: Do not over tighten the glass shade (A), if it is
screwed down too tight the glass could be break.
Untie the tie securing cable before use.
Note: Turn lamp on and off with the rocker switch.
C
C
A
4
CB
Place the silicone Ring (B) on the socket of lamp base
Carefully unpack the carton, making sure all parts are
included before assembly. Place lamp parts on a flat
surface.
(C).
1 PC
Silicone Ring
B
A
C
Do not use a G9 LED bulb longer than 6cm to avoid puncturing the glass shade.
B
C
C
A