John Lewis Emilia User manual

Recommended bulb:
1 x 42 W
G9 bulb not included
Specifications:
Max. power: 42W
Voltage: 220~240V, 50/60Hz
Weight: 1.6kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate in store
take back, but as members of the Distributor Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it to
your nearest collection facility or for further details contact your local council
or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition.
However, should any parts be damaged or missing please e-mail
[email protected].uk
Trouble Shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Spares:
Please contact John Lewis
User manual
Emilia Table Lamp
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China

Thank you for purchasing this Emilia Table Lamp.Installation Instructions
Please read the instructions carefully before use to ensure safe and satisfactory
operation of this product. Please keep these instructions for future reference.
Warnings!
This fitting should be fitted in accordance with IEE Regulations and the Building
Regulations. If in any doubt, or where required by law, consult a competent
person who is registered with an electrical self-certification scheme. Further
information is available online or from your Local Authority.
To prevent electric shock switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity supply
without your knowledge.
If you are in any doubt, please consult a qualified electrician.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
CAUTION! The bulb and surrounding parts can become hot during use.
Instructions
1. Fit bulb to the lamp holder. The maximum power indicated must not be exceeded.
2. Switch on the electricity supply at the fuse board
For indoor use only. The lamp should be placed on a flat, stable surface.
Do not cover. Keep away from curtains, bedding etc.
Always route mains cable so it does not present a hazard (entrapment, tripping etc.)
CAUTION - Always completely unplug from mains and allow to cool before changing
bulbs.
Care Instructions
1. Indoor use only.
2. Replace bulbs from John Lewis or established brand of the same type and
compatibility
3. Recommend the fitting should be cleaned with a soft dry cloth.