John Lewis Robertson User manual

IL3486
User manual
Robertson
Table lamp

Thank you for purchasing this Robertson table lamp. Please read the
instructions carefully before use to ensure safe and satisfactory operation of
this product.
Warnings!
Always use the correct bulb type with the correct wattage as indicated in
the specification table. Never exceed the Max. power rating. When
changing a bulb always switch off at the mains first and allow the bulb to
cool down before handling. Dispose of used bulbs carefully. The bulb and
surrounding parts can become extremely hot during use.
The supply cable runs through the inside of this product. Take care not to
place undue stress on the cable whilst unpacking to prevent the possibility
of a poor connection.
If you are in any doubt consult a person competent to give advice on the
assembly of electrical equipment.
If the external flexible cable of the lamp is damaged it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified
person in order to avoid a hazard.
To prevent electrocution switch off at the mains supply before assembling
or maintaining this fitting. Ensure the plug is not connected to any power
supply and read instructions before assembly.
This fitting is designed for use with self-shielded tungsten halogen lamps =

Assembly
1. Unpack the product and remove all packaging. Be careful not to
scratch the surface of the product whilst removing the plastic wrapping.
2. Fit the bulb, type and wattage as displayed on the fitting. The stated
wattage must not be exceeded. Do not touch halogen bulbs with bare
hands, as this will shorten their life.
3. Fit the shade: Place the shade glass over the lamp holder and screw into
place. If cross threading occurs undo and start again. Take care not to
overtighten as this may cause damage to the fitting.
4. Your table lamp is now ready for use. Robertson table lamp has a
ON/OFF touch sensor which can be activated by touching any part of
the stem or base.

Care instructions
Wipe clean with a clean dry cloth, when product is switched off and has
cooled down.
Recommended bulb
1 x 20W G9 Tungsten halogen capsule
Specifications
Max. Power: 20W
Voltage: 230V, 50Hz
Weight: 1kg
Please retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Issue 1 10/16