JTS CM-804i User manual

PROFESSIONAL CO., LTD
No.148, Gongye 9th Rd., Dali Dist.,
Taichung City 41280, Taiwan (R.O.C.)
TEL:[phone] FAX:[phone]
E-mail:[email protected]
www.jts.com.tw
Do not leave the devices in a place with high temperature or high humility.
Keep the devices away from re and heat sources.
Ultra-light, ergonomic design for convenient and comfortable wearing.
Stainless-steel, and unbreakable material ensure ruggedness and reliability.
Soft and Flexible boom perfectly t into any performer.
Tiny and skin-tone boom visually disappears against the face.
Replaceable cable for easy installation and service.
Excellent sound quality with smooth frequency response.
Carry Pouch and cable clip are provided.
IMPORTANT CAUTION
FEATURE
1
2
CM-804i
CM-825i
Lightweight Dual Ear Hook Microphone
59010-082-02

WEARING PROCEDURE
SPECIFICATION
3
4
5
PARTS IDENTIFICATION AND ACCESSORIES
1
2
3
4
5
6
A
B
C
D
E
7
8
7
5.1. CM-804i
5.2. CM-825i
4.1. CM-804i/825i
Try on whether the headset is t
Adjust the headband to a suitable width
Tighten or loosen the curve of the ear-hook by twisting
the loop or expanding it
Curve and bend the boom to t your face
Attach the detachable cable to a suitable place by a cable clip
3.2. Accessories
Carry Pouch
Cable clip
3.1. CM-804i/825i
Flexible boom
Slide pivot
Adjustable ear hook
Detachable cable
Adjustable headband
4-pin mini XLR female connector
1
2
3
5
6
8
3
A
B
D
E
C
Connector
Frequency Response
Polar Pattern
Sensitivity (at 1KHz)
Impedance
Max. SPL for 1% THD
4P Mini XLR
50 ~ 18,000Hz
Omni-directional
-53±3 dB* (2.24mV)*0dB=1V/μbar
1.2kΩ
130dB
Connector
Frequency Response
Polar Pattern
Sensitivity (at 1KHz)
Impedance
Max. SPL for 1% THD
4P Mini XLR
60 ~ 15,000Hz
Omni-directional
-64±3 dB* (0.63mV)*0dB=1V/μbar
1.8kΩ
130dB
4
Adjustable
headband
Detachable cable