2012 06 14
20120614
得琦電子股份有限公司 TEL: 04-24938803 FAX: 04-24914890 MO--
完成日 發稿日 再完稿 再完稿
董事長 副總 營業 副理設計
材質 發稿方式尺寸顏色
廠商: Date:
料號: From:
品名:
註
解
成品
Amber
e-mail
59512-007
SX
單色
420＊230mm
120p雪銅紙
說明書 GM-5206K/12LK/18K 雙面單色3摺 Features:
■ The series are wide-range condenser microphones with supercardioid polar pattern, that they are optimal for
speech and other demands in sound pickup situation.
■ Screw-in type gooseneck microphones feature an additional 3m cable, offering extended length for greater
positioning range.
■ Plug-in type gooseneck microphones feature a 3P XLR connector, allowing it to be plugged directly into a
matching panel jack or cable connector.
■ The small diameter gooseneck permits high flexibility in proper position, and multiple gooseneck length is able to
match different requirement.
■ -10dB attenuation and 80Hz low cut are provided for best acoustical performance.
Installation:
GM-5206C/GM-5212C/GM-5218C/GM-5225C
GM-5206CL/GM-5212CL/GM-5218CL/GM-5225CL
1. Equipped with built-in power module, that an external 9V ~ 52V phantom power is required.
2. Screw microphone flange tightly onto a mounting stud of floor stand or conference table and make suitable
cable length. (figure 1)
3. Adjust gooseneck for aiming the microphone toward the proper sound source. (figure 3)
4. Slip on windscreen over the microphone head to control breath and popping noise. (figure 4)
GM-5206K/GM-5212K/GM-5218K/GM-5225K
GM-5212LK/GM-5218LK/GM-5225LK/GM-5212DuK/5212LDuK/GM-5215DuK/5215LDuK
1. Equipped with built-in power module, that an external 9V ~ 52V phantom power is required.
2. Plug connector directly into a 3P panel jack on floor stand or conference table. (Figure 2)
3. Tighten the screw. (Figure 3)
4. Adjust gooseneck for aiming the microphone toward the proper sound source.(Figure 4)
5. Slip on windscreen over the microphone head to control breath and popping noise. (Figure 5)
GM Series Gooseneck Microphones
Dynamic Frequency response
Condenser Frequency response
(Figure 3) (Figure 4) (Figure 5)
(Figure 2)
(Figure 1)
mixer
Type..............................
Frequency Response..
Polar Pattern................
Output Connector........
Sensitivity (at 1,000Hz)
Impedance....................
Max. SPL for 1% THD...
Back Electret Condenser
80 ~ 18,000Hz
Supercardioid
XLR(M) type (power module) :
GM-5206LK/GM-5212LK/GM-5218LK/GM-5225LK
Screw 5/8" *27 :
GM-5206CL/GM-5212CL/GM-5218CL/GM-5225CL
-58dB(1mV)
220Ω
125dB
Type..............................
Frequency Response..
Polar Pattern................
Output Connector........
Sensitivity (at 1,000Hz)
Impedance....................
Max. SPL for 1% THD..
Back Electret Condenser
80 ~ 18,000Hz
Supercardioid
XLR(M) type (power module) :
GM-5206K/GM-5212K/GM-5218K/GM-5225K
Screw 5/8" *27 :
GM-5206C/GM-5212C/GM-5218C/GM-5225C
-60dB(1mV)
220Ω
125dB
Specification:
Capsule type: Electret Condenser
(for GM-5200LK/GM-5200CL series)
Capsule type: Electret Condenser
(for GM-5200K Condenser/GM-5200C series)
Type..................................
Frequency Response......
Direcetional Pattern........
Sensitivity........................
Impedance.......................
Max. SPL for 1% T.H.D.
Attenuation Switch.........
Low Frequency Roll-off
Output Connector...........
Power Supply..................
Length...............................
Capsule type: Electret Condenser
(for GM-5212DuK/GM-5215DuK/GM-5212LDuK/GM-5215LDuK)
Accessories:
Windscreen
Model Variations:
Electret Condenser
80~18,000 Hz
Supercardioid
-56±3 dB* (1.58mV) *0dB=1V /μbar
220Ω
125 dB
-10db
80Hz
3P XLR-M type(power module)
9-52 VDC Phantom power
(LED standard operation voltage 48V) for 5212LDuK/5215LDuK
417mm GM-5212DuK/5212LDuK
494mm GM-5215DuK/5215LDuK
+
10
0
-10
20 100 200 500 1k 2k 5k 10k 20kHz
6" (152mm) GM-5206K/GM-5206C/GM-5206LK/GM-5206CL
12" (305mm) GM-5212K/GM-5212C/GM-5212LK/GM-5212CL
12" (417mm) GM-5212DuK/5212LDuK
15" (494mm) GM-5215DuK/5215LDuK
18" (608mm) GM-5218K/GM-5218C/GM-5218LK/GM-5218CL
25" (635mm) GM-5225K/GM-5225C/GM-5225LK/GM-5225CL
