KDDI au BRAVIA S004 Installation guide

BasicManual
read th is manual to master
the cellular phone
Illustrationsand
Screenshots
inThisManual
Noteson
CellPhoneUse
Contents
CharacterInput
GlobalFunction
PhoneBook
Mail
Camera
EZweb
TV(1Seg)
InCaseof
LossofYourS004
Troubleshooting
Index
GettingReady
Makingand
AnsweringCalls
EZNavi
EZNewsEX
S004

Introduction
Thank you for purchasing the S004. Before using your S004, be sure to read the S004 Basic Manual (this PDF manual) to
ensure correct usage. After you have finished reading this manual, store this PDF manual and the printed manuals in safe
places so you can retrieve them whenever you need them.
Manuals for the S004
There are three manuals for the S004: the Basic Manual, printed Instruction Manual (Japanese) and full Instruction Manual
(Japanese).
●For learning the basics:
Read the S004 Basic Manual (this manual) or printed S004 Instruction Manual (Japanese).
●For learning details of each function:
The full Instruction Manual (Japanese) gives detailed instructions on using each function and can be downloaded from
the au homepage: http://www.au.kddi.com/torisetsu/index.html
To ensure proper usage of the S004, be sure to read the Safety Precautions "安全上のご注意" in the Instruction Manual.
To access from EZweb (free of packet communication charge): R⇒Top Menu/Search ⇒
auお客さまサポート
(au Customer Support) ⇒
オンラインマニュアル
(Online Manual)
Scan this QR code to access the au Online Manual. ▶
All mentions of "the S004" in this manual refer to "BRAVIA®Phone S004."
•
•

1
Illustrations and Screenshots in This Manual
Illustrations and Screenshots in This Manual
Note on Illustrations
The illustrations in this manual may look different from the actual cell phone in shape, color and typeface. The key
illustrations are also simplified as shown below.
Key Illustration Key Illustration
①&⑧R
②L⑨C
③N⑩F
④
123
456
789
*0#
⑪w
⑤it ⑫g
⑥cjs ⑬f
⑦%⑭)
Note on Screenshots
The screenshots in this manual are simplified and may look different from the actual cell phone screens.
■
■
①
②⑧
⑨
⑩
⑪
③
⑤
④
⑦
⑥
⑫
⑬
⑭
①
②⑧
⑨
⑩
⑪
③
⑤
④
⑦
⑥
⑫
⑬
⑭

2
Notes on Cell Phone Use
Notes on Cell Phone Use
Cell Phone Etiquette
The cell phone always emits weak radio waves when power
is on.
Use the cell phone in an enjoyable and safe manner without
forgetting to be considerate of others around you.
Use of cell phones is not allowed in some places.
Do not use the cell phone while you are driving. Doing
so is both dangerous and prohibited by law.
Using a cell phone in an aircraft is prohibited by law.
Set Airplane Mode to ON and turn the cell phone
power off.
Radio waves from cell phones may interfere with
medical electrical equipment.
Some people close to you in crowded places such
as packed trains may be using a cardiac pacemaker.
Turn the cell phone off in such places.
Abide by the rules of hospitals and other medical
institutions where it is forbidden to use or carry cell phones.
Be considerate of where you use the cell phone and
how loudly you talk.
Do not make calls in theaters, museums, libraries, and
other similar places. Turn power off or turn on manner
mode not to disturb others around you by ring tones.
Do not use the cell phone on a street where you might
interrupt the flow of pedestrians.
Move to areas where you will not inconvenience others
on trains or in hotel lobbies.
Refrain from talking in a loud voice.
●
•
•
●
•
•
●
•
•
•
•
Obtain the permission of other people before you take
their photos with the cell phone's camera.
Do not record information with the cell phone's camera
in bookstores and other locations where taking photos
is not permitted.
Do Not Use the Cell Phone While Driving!
Turn off your cell phone or put it in Drive Mode while
driving.
Do not use the cell phone while driving a car/motorcycle
or riding a bicycle. It may result in a traffic accident. Using
a cell phone while driving is prohibited by law. Using a
cell phone while riding a bicycle may also be punishable
by law.
Prohibited!
Looking at a cell phone display
Talking on a cell phone while holding it
Drive Mode
In Drive Mode, a Japanese message meaning "I am
driving right now. Please leave your name and message
after the beep." is played when a call is received, and
asks the caller to leave a message on the answer memo.
When the standby screen is displayed, press , use
to select Drive, and then press (Set).
•
•
•
•

3
Notes on Cell Phone Use
Disaster Message Board Service
When a large scale disaster occurs, you can register
your safety information from EZweb. The registered
information can be referred from anywhere in Japan from
EZweb or Internet.
When a large scale disaster occurs,
from an au phone, you can register your
safety information (i.e. your condition
and comments) to the 災害用伝言板
(Disaster Message Board) created on
the EZweb.
After registration of your safety
information, e-mail is sent to your family
or acquaintances you have previously
designated to notify that your safety
information has been uploaded to
the 災害用伝言板 (Disaster Message
Board).
You can inquire for safety information
of a person by entering his/her phone
number from EZweb or Internet.*
* To inquire from other carriers' cell
phone, a PHS or PC, access
"http://dengon.ezweb.ne.jp/".
Access
R⇒Top Menu/Search ⇒
災害用伝言板
(Disaster Message Board)
http://dengon.ezweb.ne.jp/
•
•
•
Registered information is stored until the service set
up for the disaster ends.
The maximum available number of registrations is 10
per phone number. When the number of registrations
exceeds 10, the oldest one is overwritten.
The demonstration of this service can be referred to
anytime by pressing ⇒Top Menu/Search ⇒
auお客さ
まサポート
(au Customer Support) ⇒
調べる
(Search)
⇒
災害用伝言板(デモ版)
(Disaster Message Board
(Demo Version)).
To view the Disaster Message Board in English, select
English from the top menu of the Disaster Message
Board.
•
•
•
•
Registering
safety
information
Registering
safety
information
Inquiring
for safety
information
Inquiring
for safety
information

4
Contents
Contents
Introduction
Illustrations and Screenshots in This Manual
1
Notes on Cell Phone Use 2
Cell Phone Etiquette..................................................... 2
Do Not Use the Cell Phone While Driving! ................... 2
Disaster Message Board Service ................................. 3
Contents 4
Getting Ready 6
Checking the Contents of the Box ................................ 6
Names of Parts............................................................. 7
Charging the Battery Pack............................................ 8
Learning the Basics...................................................... 9
Turning On Power....................................................... 10
Switching the Display Language to English................ 10
Initial Setup of E-mail and EZweb .............................. 10
Checking Your Phone Number and E-mail Address ... 10
Display Indicators ....................................................... 11
Using Main Menu ....................................................... 13
Changing Your E-mail Address................................... 14
Security Code and Passwords ................................... 15
Making and Answering Calls 16
Making a Call.............................................................. 16
Making an International Call....................................... 16
Answering a Call ........................................................ 17
Returning a Call (Outgoing History/Incoming History)
................................................................................... 17
One-ring Calls ............................................................ 17
Adjusting the Earpiece Volume during a Call ............. 18
Turning On Manner Mode........................................... 18
Changing the Incoming Ring Tone ............................. 18
Adjusting the Incoming Ring Tone Volume ................. 19
Turning On the Answer Memo.................................... 19
Global Function 21
Setting the Area.......................................................... 21
Obtaining the Latest PRL (Preferred Roaming List)... 21
Calling Japan from Overseas ..................................... 22
Character Input 23
Character Entry Modes .............................................. 23
Entering Alphanumeric Characters ............................ 23
Entering E-mail Addresses......................................... 24
Entering Pictograms/Symbols/Face marks................. 25
Phone Book 26
Saving a Phone Book Entry ....................................... 26
Dialing from the Phone Book...................................... 26
Editing Phone Book Entries........................................ 26
Saving a Phone Number from the Incoming or
Outgoing History ........................................................ 27
Mail 28
Using E-mail ............................................................... 28
Creating and Sending E-mail Messages .................... 28
Reading Received E-mail Messages.......................... 29

5
Contents
Reading an E-mail Message
with an Attached Photo or Movie................................ 29
Replying to Received E-mail Messages..................... 29
Rejecting Spam .......................................................... 30
Using C-mail............................................................... 31
Creating and Sending C-mail Messages.................... 31
Reading Received C-mail Messages ......................... 31
Camera 32
Photo Taking Tips ....................................................... 32
About Photo Modes.................................................... 32
Taking a Photo............................................................ 33
Viewing Photos........................................................... 33
EZweb 34
Accessing Sites .......................................................... 35
Bookmarking Frequently Accessed Pages................. 36
Viewing Bookmarked Pages....................................... 36
Checking Charges...................................................... 37
Downloading Chaku-Uta-Full®/Chaku-Uta®................ 37
EZ News EX 38
Basic Operations ........................................................ 38
Setting EZ News EX................................................... 38
EZ Navi 40
Passenger Seat Navi for People
in the Passenger Seat to Check the Route ................ 40
Security Navi to Check Where Your Kids Are ............. 40
EZ Navi Walk for When You Go Out ........................... 41
Evacuate Navi to Guide You Home or to Nearby
Evacuation Areas during Disasters ............................ 42
TV (1Seg) 43
Initial Setup of au Media Tuner ................................... 44
Watching TV (1Seg) ................................................... 44
Basic Operations ........................................................ 45
Exiting the au Media Tuner ......................................... 45
In Case of Loss of Your S004 46
Setting Conditions for Activating the Remote Ctrl Lock
................................................................................... 46
Remotely Activating the Remote Ctrl Lock on Your
S004 ........................................................................... 47
Activating the Remote Ctrl Lock by the Security Lock
Service ....................................................................... 47
Troubleshooting 48
Index 50
Radio Wave Exposure and Specific
Absorption Rate (SAR) Information 53
Radio Frequency (RF) exposure and
Specific Absorption Rate (SAR) ................................. 54
Guidelines for Safe and Efficient Use......................... 55
FCC Statement for the USA ....................................... 58
Industry Canada Statement ....................................... 59
Declaration of Conformity for CDMA SO004.............. 60

6
Getting Ready
Getting Ready
Checking the Contents of the Box
The box contains the cell phone and accessories.
Cell phone• Battery pack• Instruction Manual (Japanese)
Warranty (Japanese)
Safety Precautions (Japanese)
Global Passport CDMA/GSM Owner’s Guide (Japanese)
Osaifu-Keitai®Guide (Japanese)
JIBUN BANK Launcher Operation Guide (Japanese)
Wi-Fi WIN Operation Guide (Japanese)
•
•
•
•
•
•
•
An AC adapter and microSD™ memory card are not included. Purchase a specified AC adapter (sold separately) and
a commercially available microSD™ memory card.
•

7
Getting Ready
Names of Parts
From the Front■
au IC-Card* * Do not remove this
card unnecessarily
as your phone
number is
recorded on it.
Earpiece
Phone book key
Customize key
Microphone
Incoming indicator
/
Charge indicator
Mail key
Send key
Dial keys
Display
Cross controller
Power/End key
EZ apps key
Built in TV antenna
EZ key
Clear/Memo key
Optical sensor
Quick key
FeliCa mark
Camera start
indicator
Lens (camera)
Incoming indicator/
Charge indicator
Built in antenna
Battery pack cover
Battery pack (built-in)
Built in antenna
Speaker
Infrared port
Photo light
Sub-display
microSD memory
card slot/cover Charge terminal
External
connecting terminal/cover
Side up key/Manner key
Side down key
Camera key
Strap eyelet
au IC-Card* * Do not remove this
card unnecessarily
as your phone
number is
recorded on it.
Earpiece
Phone book key
Customize key
Microphone
Incoming indicator
/
Charge indicator
Mail key
Send key
Dial keys
Display
Cross controller
Power/End key
EZ apps key
Built in TV antenna
EZ key
Clear/Memo key
Optical sensor
Quick key
FeliCa mark
Camera start
indicator
Lens (camera)
Incoming indicator/
Charge indicator
Built in antenna
Battery pack cover
Battery pack (built-in)
Built in antenna
Speaker
Infrared port
Photo light
Sub-display
microSD memory
card slot/cover Charge terminal
External
connecting terminal/cover
Side up key/Manner key
Side down key
Camera key
Strap eyelet
From the Back■From the Sides■

8
Getting Ready
Unfold the power plug of the AC adapter and
plug it into a 100 V AC power outlet.
Confirm that the charge indicator lights.
Charging: The charge indicator lights.
Charging finished: The charge indicator goes out.
Be sure to close the cover of the external connecting
terminal when charging is finished.
Do not pull or twist the cover of the external
connecting terminal forcibly.
Be sure to use the common AC adapter 02 (sold
separately) when charging overseas.
➡
➡
•
•
•
•
•
Charging the Battery Pack
The battery pack is not fully charged at the time of purchase.
Be sure to charge the battery pack before using the cell
phone for the first time.
An AC adapter is not included. Purchase a specified AC
adapter (sold separately).
Connect a specified AC adapter to the cell
phone with the battery pack attached.
Open the cover of the external connecting terminal.
Check the shape of the connector of the AC adapter,
and plug it straight into the external connecting
terminal.
•
➡
•
2
1
3
AC adapter
100 V AC power outlet
Charge indicator
Connector
External
connecting
terminal
2
1
3
AC adapter
100 V AC power outlet
Charge indicator
Connector
External
connecting
terminal

9
Getting Ready
Learning the Basics
Key Assignments
Side Key Assignments
If you lose track of where you are or if you make a mistake, press to return to the previous screen. Return to the
standby screen by holding down for at least one second.
■
■
•
&
l
C
N0〜9*#:
u
c
%
r
d
F
: Display Notification
window/Shortcut menu.
: Make/answer calls.
: Set/cancel Answer memo.
Delete characters.
Cancel operation.
: Display Incoming History.
: Display the ticker field, info pane and
search window.
: Display Main menu.
R: Display EZ Service menu.
: Turn power on/off.
End call/communication.
Cancel operation.
Input phone numbers and characters.
: Display Outgoing History.
: Display EZapps menu.
: Use Phone Book.
L: Display E-mail/C-mail menu.
w: Display QuickAccess menu.
t: Activate function assigned to
M59 Customize Key.
&
l
C
N0〜9*#:
u
c
%
r
d
F
: Display Notification
window/Shortcut menu.
: Make/answer calls.
: Set/cancel Answer memo.
Delete characters.
Cancel operation.
: Display Incoming History.
: Display the ticker field, info pane and
search window.
: Display Main menu.
R: Display EZ Service menu.
: Turn power on/off.
End call/communication.
Cancel operation.
Input phone numbers and characters.
: Display Outgoing History.
: Display EZapps menu.
: Use Phone Book.
L: Display E-mail/C-mail menu.
w: Display QuickAccess menu.
t: Activate function assigned to
M59 Customize Key.
): Activate Camera.
f: Light assist light.
g: Set/cancel manner mode. ): Activate Camera.
f: Light assist light.
g: Set/cancel manner mode.

10
Getting Ready
Hiding/Redisplaying the
Notification Window
When the Notification window is
displayed on the standby screen,
you can temporarily hide it by
pressing &(Back) and then display
the Main menu by pressing c.
To redisplay the hidden Notification
window, press dwhen the standby
screen is displayed.
Turning On Power
Hold down Ffor at least one second.
You cannot receive or make calls if (out of range
indicator) is displayed.
Turning Off Power
When the standby screen is displayed, hold down Ffor
at least one second.
Switching the Display Language
to English
You can switch the display language for function names
and other items to English.
When the standby screen is displayed, press c.
Use ato select
機能/設定
(Func/Settings)
and then press c(選択 [Select]).
■
•
■
➡
Notification windowNotification window Use jto select
画面表示
(Screen Display) and
then press c(選択 [Select]).
Use jto select Set Language and then press
c(選択 [Select]).
Use jto select English and then press
c(Set).
Initial Setup of E-mail and EZweb
To use e-mail and EZweb, you need to apply for an EZweb
subscription. If you did not apply for an EZweb subscription
at the time of purchase, contact an au shop or the au
Customer Service Center.
Also, before use, you need to configure initial settings. Your
e-mail address is assigned automatically in the initial setup.
When the standby screen is displayed, press L.
Press c(OK).
After a short while, your e-mail address is displayed.
Press c(OK).
The initial settings are complete.
You can also configure initial settings by pressing
or .
Checking Your Phone Number
and E-mail Address
When the standby screen is displayed, press c
and then 0.
➡
➡
➡
➡
➡
•

11
Getting Ready
Display Indicators
Display indicators inform you of mail arrival, current settings, etc.
Display■Indicator Description
①Signal strength
②Battery level
③
Wi-Fi WIN connection status
Overseas (CDMA)/(GSM) mode set
Packet communication available
④A microSD™ memory card (sold separately) inserted
⑤During a call
au Media Tuner activated
⑥EZapps activated
⑦Connecting to EZweb
⑧Receiving EZ News EX information
⑨Missed calls
⑩New or unread e-mail/C-mail
⑪Current date and time
⑫Ticker field
⑬Search window
⑭Info pane
⑮Notification icon
⑯Shortcut menu
⑰Auto Lock or Remote Ctrl Lock activated
⑱
Manner mode set
⑲Answer memo or manner mode set
①
⑰⑱⑲
②
③
④
⑦
⑪
⑮
⑭
⑬
⑫
⑯
⑤
⑥⑧ ⑩
⑨①
⑰⑱⑲
②
③
④
⑦
⑪
⑮
⑭
⑬
⑫
⑯
⑤
⑥⑧ ⑩
⑨

12
Getting Ready
Sub-display
①② ③
Indicator Description
①Signal strength
②Battery level
③Current date and time
The date and time are set automatically. However, auto
time adjustment is invalid when Area Setting is set to
overseas mode. Set the date and time manually under
M551 Auto Time Adj.
Press to switch the sub-display screen.
■
•
•

13
Getting Ready
Using Main Menu
You can access various functions from the Main menu.
Each Main menu pattern has a different set of items.
BRAVIA Sky Flow ericle でか文字
(Large Font)
Infrared Comm TV Infrared Comm Infrared Comm TV
Camera Data Folder Camera Camera Data Folder
Tools Video Viewer Video Viewer Video Viewer Video Viewer
LISMO Tools LISMO LISMO Tools
TV Camera Data Folder TV Camera
Video Viewer LISMO TV Data Folder LISMO
Global Function Func/Settings Tools Tools PC Site Viewer
Data Folder microSD microSD microSD Func/Settings
Func/Settings Infrared Comm Func/Settings Func/Settings Global Function
EZ FeliCa Global Function microSD
microSD PlayNow EZ FeliCa
PC Site Viewer PlayNow Kisekae Infrared Comm

14
Getting Ready
Changing Your E-mail Address
You can change the account
name of your e-mail address.
When the standby screen is displayed, press L.
Use jto select E-mail Setup and then press
c(Select).
Use jto select Other and then press
c(Select).
The cell phone connects to the server.
Use jto select
Eメールアドレスの変更
(Change
E-mail Address) and then press c(Select).
Use jto select the entry box, press c(Input),
enter your security code, and then press c(OK).
Your security code is the four-digit number you wrote
on your subscription form.
If the security code is incorrectly entered three times
consecutively during a single day, the e-mail address
change operation will be disabled until the next day.
Use jto select
送信
(Send) and then press
c(Select).
➡
➡
➡
➡
•
•
➡
△△△@ezweb.ne.jp
Account name Domain name
E-mail address
△△△@ezweb.ne.jp
Account name Domain name
E-mail address
Use jto select
承諾する
(Accept) and then
press c(Select).
Use jto select the entry box, press c(Input),
enter an e-mail address using single-byte
alphanumeric characters, and then press
c(OK).
For details on entering e-mail addresses, see page 24.
Use jto select
送信
(Send) and then press
c(Select).
Use jto select OK, press c(Select) and
then c(OK).
Check that the e-mail address has been updated
before pressing c(OK).
Your e-mail address cannot be changed if the new
address you enter in the above procedure is already
being used. In this case, enter a different e-mail
address.
➡
➡
•
➡
➡
•
•

15
Getting Ready
EZ Password
Usage
Example
Subscribing or canceling subscriptions to
EZweb fee-based contents
Initial Setting The four-digit number you wrote on your
subscription form
Premium EZ Password
Usage
Example
①Subscribing or canceling subscriptions
to EZweb fee-based contents paid
by
まとめて
au
支払い
(au Collective
Payment Service)
②Purchasing products from EZweb sites
using
まとめて
au
支払い
(au Collective
Payment Service)
Initial Setting The four-digit number you wrote on your
subscription form
■
■
Security Code and Passwords
You can use a security code and other passwords
described below.
Take care not to forget your security code and passwords,
because they are required for performing various
operations and using subscription services.
Security Code
Usage
Example
①Using the Answering Service (Voice
Mail) and Call Transfer remotely from a
fixed-line phone
②Making inquiries, applications, and
changes while using au Customer
Service Center voice guidance, au web
pages, and EZweb
③Changing the settings of Mail Filter or
Other under E-mail Setup
Initial Setting The four-digit number you wrote on your
subscription form
Lock No.
Usage
Example
Changing various settings of the cell
phone
Initial Setting 1234
■
■

16
Making and Answering Calls
Making and Answering Calls
Making a Call
When the standby screen is displayed, use 0
to 9to enter a phone number.
When calling to a fixed-line phone, you also need to enter
the area code.
Press N.
To end the call, press F.
After you enter a phone number, you can add 184 or
186 to the phone number as follows:
Press (Call).
Use to select Add Special No. and then press
(OK).
Use to select 184 or 186 and then press (Add).
184: When you do not want to inform the other party of
your phone number.
186: When you want to inform the other party of your
phone number.
•
➡
•
•
➡
➡
➡
Making an International Call
001 International Call Service
Available without any additional application.
Example: To call 212-123-△△△△ in the USA
Enter the access code, a country code, area code
and phone number, and then press N.
International call charges are billed together with
monthly local call charges.
For more information on 001 International Call Service,
dial either of the following numbers:
From au cell phones (toll-free):
157 (area code not required)
From fixed-line phones (toll-free):
0077-7-111
(Open 9:00 to 20:00 everyday)
■
•
•
001010
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
212 123
-
XXXX1001010
↑
KDDIinternational
accesscode
↑
Country
code
(USA)
↑
Areacode
↑
Phonenumber
212 123
-
XXXX1

17
Making and Answering Calls
Answering a Call
To answer a call, press N.
To end the call, press F.
Display When a Call is Received
The phone number of the caller appears.
If the caller's phone number and name are in the phone
book, the name is also displayed.
When the phone number of the caller is not displayed, one
of the following indicators may appear.
Indicator Meaning
ID Unsent The caller did not send a Caller ID.
Payphone The call is from a pay phone.
Not support The call is from a phone that does not
support Caller ID.
Missed Call Notification
If you did not answer a call, and Missed Call are displayed
to let you know that you missed a call.
To check the caller's phone number, use dto select
Missed Call and then press c(Select). You can then return
the call (see the procedure on the right).
•
■
■
Returning a Call (Outgoing History/
Incoming History)
Example: Returning a call to a phone number in the
incoming history
When the standby screen is displayed, press l.
Press rwhile the standby screen is displayed to display
the Outgoing History screen.
Use jto select the phone number you want
to call and then press c(Detail).
Press rto display the Outgoing History screen.
Press N.
The cell phone can store up to 50 phone numbers in
each of the incoming and outgoing history.
One-ring Calls
What is a One-ring Call?
A one-ring call is a call from an unknown caller that only
rings once, causing it to be stored in the incoming history.
One-ring calls are often used to get you to return the call,
which will connect you to a dating service or some other
service that charges you at high rates.
•
➡
•
➡
•
■

18
Making and Answering Calls
One-ring Indicator
indicator (red) on the Incoming History screen indicates
you have received a one-ring call (a call rang for three
seconds or shorter). Be careful when you return a call to an
unknown caller.
Adjusting the Earpiece Volume
during a Call
During a call, use j.
u: Increases the volume.
d: Decreases the volume.
Press c(OK).
Turning On Manner Mode
When the standby screen is displayed, hold down
gfor at least one second.
This turns on manner mode, and displays , and on
the standby screen. This also turns on Answer memo,
which is indicated by on the standby screen.
Turning Off Manner Mode
When the standby screen is displayed, hold down gfor
at least one second.
Turning off manner mode causes , and to disappear
from the standby screen. Answer memo is also turned off,
which is indicated by disappearing from the standby
screen.
■
•
•
➡
■
Even in manner mode, the cell phone still emits a
sound when autofocusing, a shutter sound when you
take a photo.
Changing the Incoming Ring Tone
When the standby screen is displayed, press c.
Use ato select Func/Settings and then press
c(Select).
Use jto select Sound/Vib/Lamp and then
press c(Select).
Use jto select Incoming Setup and then press
c(Select).
Use jto select Incoming Call and then press
c(Select).
Use jto select (Ringtone) and then press
c(Select).
Use jto select Original and then press
c(Select).
Use jto select a ring tone and then press
c(Set).
The incoming ring tone is set.
If you press &(Play), the tone plays.
Press %(OK).
•
➡
➡
➡
➡
➡
➡
➡
•
➡
Table of contents
Other KDDI Cell Phone manuals

KDDI
KDDI ARROWS Z ISW11F Installation guide

KDDI
KDDI K007 User manual

KDDI
KDDI AU W31T User manual

KDDI
KDDI AU Cyber-Shot S003 User manual

KDDI
KDDI AQUOS SHOT SH008 User manual

KDDI
KDDI AU A5506T Installation guide

KDDI
KDDI Au TS003 Installation guide

KDDI
KDDI CA007 User manual

KDDI
KDDI NS01 User manual

KDDI
KDDI au K003 User manual

KDDI
KDDI W62SA User manual

KDDI
KDDI T001 User manual

KDDI
KDDI aquos shot SH003 User manual

KDDI
KDDI au IS11S Installation guide

KDDI
KDDI GRATINA2 User manual

KDDI
KDDI SH011 User manual

KDDI
KDDI K009 User manual

KDDI
KDDI sportio water beat User manual

KDDI
KDDI au IS12SH Specification sheet

KDDI
KDDI SH001 User manual