Kimball XSEDE Height Adjust User manual

XSEDE® Height Adjust
1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3050825,B
Assembly Instructions
1. Assemble Foot to the Columns using supplied Socket Round
5/16-18 X 5/8” screws. Tighten Screws Firmly. See Figure B.
IMPORTANT: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
2. Attach the crossbars on the long side of the base using sup-
plied Socket Flat Head 5/16-18 X 1” screws. See Figure C.
IMPORTANT: Make sure the correct screws are used. Using
longer screws may destroy the internal parts of the column.
Figure A– Assembled Product
Xsede Freestanding Single
Column H
Hardware
4—Round Head Socket 5/16-18 X 5/8”
4—Flathead Socket 5/16-18 X 1”
10-Panhead Phillips #8X3/4” Wood Screw
4– Panhead Phillips #8 X 5/8” Wood Screws
2-Cable ties.
1– Power supply Bracket
Installation
Figure B– Attach Feet
Figure C– Attach Cossbar
Tools Required
• 3/16” Hex Drive
• #2 Phillips Drive
• Drill
Crossbar
Column
Foot

XSEDE® Height Adjust
2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3050825,B
Assembly Instructions
3. Attach Base to a worksurface using supplied Panhead
#8X3/4”, one in each hole of the crossbar See Figure D.
IMPORTANT: supplied screws are designed to work with a
worksurface with a minimum thickness of 3/4”.
4. Using #8 X 5/8 Wood screws, Attach Power Supply Bracket
between crossbars. See Figure E
Xsede Freestanding Single
Column H
Installation Continued
Figure D– Worksurface Attachment
Front/ User Side
Back/ Approach
Figure E – Power Supply Bracket
4-5/8"
1-7/16" FOR 36"
7-7/16" FOR 42"

XSEDE® Height Adjust
3
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Customer Care.
Part 3050825,B
Assembly Instructions
5. Attach the handset to front edge of the worksurface using in-
cluded #8 X 5/8” Panhead Wood Screws. Connect the cables
and power supply. Ensure no cables are hanging down. See Fig-
ure F.
Figure F– Electrical Assembly
Xsede Freestanding Single
Column H
Installation Continued
Warning leaflet and user manual should be
Warning Leaflet Electric User Manual
Power Cable
Power Supply
Control Box
Handset
Front/ User Side
Back/ Approach