Kimball EVERYSPACE User manual

EVERYSPACE™
1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have
any questions concerning these instructions, please call Kimball Customer Care.
Part 3558054,- Revision -
Assembly Instructions
Benching single side
Installation
1. With work surface laying of a soft surface, mounting holes
up, attach leg assemblies using #10 x 3/4” pan head screws
through mounting plates and into predrilled holes in the
work surface Figure A
2. Place power beam on a soft surface, multiple channels fac-
ing up, mount the (3) work surface to beam brackets to the
beam (refer to DATA BEAM installation for attachment
plate usage) See Detail A for orientation of bracket.
Mount one work surface to beam bracket in the center of
the beam, the (2) outside brackets will be mounted 5/16”
from each end. Figure A
Figure J
Tools required
• Cordless Drill w/#2 Phillips head bit drive
• 5mm Allen key
• Level
Hardware Required
2 - Leg assemblies
3 - Work surface to beam brackets
6 - Beam attachment plates
4 - 5/16-a8 glides
12 - M8 x 14mm button head cap screws
16 - #10 x 3/4” pan head screws
BEAM SIDE
USERS SIDE
Work surface to beam bracket
Detail A
5/16” each end

EVERYSPACE™
2
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent. If you have
any questions concerning these instructions, please call Kimball Customer Care.
Part 3558054,- Revision -
Assembly Instructions
Benching single and double
side (Single side)
Installation
3. Attach the beam/work surface bracket assembly completed
in step 11 on the beam side of the work surface. Using the
#10 x 3/4” pan head screws attach to the bottom of the
work surface. Figure B (SEE DETAIL B FOR ALIGN-
MENT) Stand up and level, installation is now complete.
Figure B
Tools required
• Cordless Drill w/#2 Phillips head bit drive
• 5mm Allen key
• Level
Hardware Required
2 - Leg assemblies
3 - Work surface to beam brackets
6 - Beam attachment plates
4 - 5/16-a8 glides
12 - M8 x 14mm button head cap screws
16 - #10 x 3/4” pan head screws
Detail B
USERS SIDE
BEAM SIDE