kingsley-bate Ipanema IP10 User manual

Kingsley-Bate
IP10 Ipanema Ottoman
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE IP-10
LEG ASSEMBLY SEAT LEG ASSEMBLY
*NOTE
A TENON
B MORTISE HOLE
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assem bly of the furniture pleas e match all joints with the corresponding
letters or numbers stamped on the furniture.
STEP-II
Find the LEG ASSEMBLY with the num bers or letters stamped on it and lay it
down first. Fit the SEAT tenons into the LEG ASSEMBLY m ortise holes as
shown in the photo.
STEP-III
Carefully fit the remaining LEG ASSEMBLY mortise holes over
all the exposed tenons. Ham mer the dowels into all the pre-
drilled holes of the assem bly as shown in the photo. Use the
sanding block between the ham mer and the dowels for the last
few blows to prevent m arring of the wood. DO NOT FORCE DOWELS; ANY
PROTRUDING DOWEL CAN EASILY BE SANDED DOWN.
IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOUR OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]