kingsley-bate Waverley WV40 User manual

Kingsley-Bate
WV40-50-60 Waverley Backless Bench
Assembly Instructions

KINGSLEY-BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE WV–40/50/60
LEG ASSEMBLY SEAT LEG ASSEMBLY
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to avoid marring the wood.
NOTE: During assem bly of the furniture pl ease match joints with the corresponding
letters or numbers stamped on the furniture.
* NOTE
A TENON
B MORTISE HOLE
STEP-II
Carefully lay the SEAT on a flat, smooth su rface and fit the LEG ASSEMBLIES mortise
holes onto the SEAT tenons as shown in the assembly photographs. Joints are meant to fit
snugly together, if necessary use a rubber mallet or a ham mer with a block of wood
between the hammer head and the LEG ASSE MBLIES to drive the LEG ASSEMBLIES
into position.
STEP-III
Carefully hammer dowels into the pr e-drilled holes of the assem bly,
details are shown in the photogr aphs. NOTE: DO NOT FORCE THE
DOWELS; ANY EXCESS CAN EASILY BE SANDED AWAY. IF
THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE
THE DOWELS, YOU MIGHT DAMAGE THE ITEM.
IF YOU HAVE ANY QUESTIONS REGARDING ASSEMBLY OF YOUR
KINGSLEY-BATE FURNITURE, PLEASE CONTACK A KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
1IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]