kingsley-bate Ibiza IB10 User manual

Kingsley-Bate
IB10 Ibiza Ottoman
Assembly Instructions

KINGSLEY–BATE
Fine Garden Furniture
0ASSEMBLY INSTRUCTIONS FOR THE IB-10
END FRAME RAILS END FRAME
STEP-I
Unpack, inspect and lay the parts on a clean, flat, soft surface to
avoid marring the wood.
NOTE: During assembly of the furnitu re please match joints with
the corresponding letters or numbers marked on the item joints.
TOP
STEP-II
Fit the curved RAIL on top and the straight RAIL on
the bottom of the END FRAME as shown in the
assembly photos. Secure with bolts provided.
STEP-III
Fit the other END FRAME and secure with bolts provided. Use the
allen key provided to tighten the bolts properly.

STEP-V
Set the TOP face down on a clean, smooth
surface and fit the leg assembly onto the TOP
and secure with the screws provided. Use a
proper hand held screwdri ver, use of a power
screwdriver may damage the item.
1IF YOU HAVE ANY QUESTIONS REGARDING THE ASSEMBLY OF YOUR
2KINGSLEY-BATE FURNITURE, PLEASE CONTACT THE KINGSLEY-BATE DEALER
NEAREST TO YOU OR KINGSLEY-BATE DIRECTLY. WE THANK YOU FOR
CHOOSING OUR FURNITURE.
* KINGSLEY-BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY
7200 Gateway Court, Manassas, Virginia 20109
Phone: [phone], Fax: [phone]