kingsley-bate GV-30 User manual

KINGSLEY BATE
Fine Garden Furniture
ASSEMBLY INSTRUCTIONS FOR THE GV-30
BACK SLATS SEAT SEAT INSERT
*NOTE:
A TENON
B MORTISE HOLE
RIGHT END FRAME LEFT END FRAME
STEP-I
Unpa k, inspe t and lay the parts on a lean, flat, soft surfa e to avoid marring the wood.
NOTE: During assembly of the furniture please mat h joints with the orresponding letters or
numbers stamped on the omponents.
STEP-II
Gently lay down the END FRAME with the
stamps near the mortise holes on a lean,
flat, smooth surfa e. Fit the BACK SLATS
and the SEAT FRAME into the END
FRAME mortise hole as shown in the
assembly pi tures. You an gently ro k the
omponents until all joints fit snugly together.
NOTE: The SEAT and BACK SLAT tenons will be stamped with letters or numbers to help
guide you, please mat h them with the letters or numbers stamped on the END FRAME.

STEP-III
Fit the remaining END FRAME mortise holes over all exposed tenons and using a rubber
mallet or a regular hammer with the sanding blo k between the hammer and the wood, gently
drive all joints until they fit snugly together as shown in the assembly pi tures. Insert all
dowels as shown in the assembly pi tures, small dowels “S” for the ba k and long dowels
“L” for the front legs. Drop the SEAT INSERT into pla e.
NOTE: DO NOT FORCE THE DOWELS; ANY EXCESS CAN EASILY BE SANDED
AWAY. IF THE DOWELS ARE NOT FLUSH DO NOT CONTINUE TO DRIVE THE
DOWELS, YOU MIGHT DAMAGE THE ITEM.
IF YOU HAVE ANY QUESTIONS REGARDING ASSEMBLY OF YOUR
KINGSLEY BATE FURNITURE, PLEASE CONTACT KINGSLEY BATE CUSTOMER
SERVICE AT 703-361-7000. WE THANK YOU FOR CHOOSING OUR FURNITURE.
*KINGSLEY BATE WILL NOT TAKE RESPONSIBILITY FOR DAMAGE
IF THESE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY*
7200 Gateway Court, Manassas, Virginia 20109
Phone. [phone], Fax. [phone]