©2016 Kohler Co. 1 1207227-X2-A
BEFORE YOU BEGIN
IMPORTANT INFORMATION
Please read these instructions carefully to familiarize yourself
with the required tools, materials and installation sequences.
Follow the sections that pertain to your particular installation.
This will help you avoid costly mistakes. In addition to proper
installation, read all operating and important information.
All information in these instructions is based upon the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in product
characteristics, packaging, or availability at anytime without
notice.
Please ensure the electric work is nished before starting to
install the furniture.
Before installation carefully inspect the new xture for any
signs of damage.
CAUTION: Risk of product damage.
Use care when moving the cabinet to avoid impacting,
sliding or side-loading the legs.
NOTE:
The K-2607X bridge is designed to be installed with
the K-45980X cabinet and is not intended to be installed
individually. Read both product installation instructions
before beginning. The cabinet should be installed before
the bridge.
INSTALLATION
A. Install Legs
IMPORTANT: Legs are not required for installation
between two vanities.
NOTE: To protect the nished surface of the cabinet,
perform assembly tasks on a at, padded work surface.
Place the cabinet upright on a at, padded surface.
Remove the drawer before install the legs. Refer to the
"Remove/Reinstall the Drawer" section.
Determine whether the legs will be installed (left or right).
The opposite side will be supported when installed to
the K-45980X vanity.
Lay the cabinet on its side and position each leg so the
clips face toward each other.
Secure each leg post using #8 x 2" screws, lock washers,
and at washers.
x
INSTALLATION AND CARE GUIDE
ขอแนะนําการติดตั้งและการดูแลรักษา
TRESHAM VANITY BRIDGE
ตู้เฟอร์นิเจอร์เชอมต่อ รุ่นเทรสแชม
K-2607X
