Kohler K-15515T User manual

-1-
M
INSTALLATION INSTRUCTIONS
()
MIRROR W/DEFOGGER
K-15515T
M MODULAR
, 2010
Copyright Kohler China Ltd., 2010
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-
Before installation carefully inspect the new fixture for any
signs of damage.
Tempered glass cannot be cut.
Don't use acidic or alkalic cleaners or
alcohol to clean the wooden surface. Use a dampened
cloth to clean.
please leave instructions for the
consumer.
WARNING: Risk of injury or product damage.
WARNING:
·
·
·
·
-
PARTS
Parts supplied with your cabinet. (For cabinet body and door
replacement, call customer service with model number.) Be
sure to check the cardboard supports in the carton, glass
parts are packed in them.
13-1 528437
ACCESSORIES LISTACCESSORIES LIST
Screws ST3.5 35
ST3.5 35
X6
Wall Anchors
X6
Z Clip
Z
X2
Screw M8x8
M8x8
X4
WPS Bracket
WPS
X1
Glass Shelves
X1
1142822-T01-A

-2-
609
12
14
116
780
762
ROUGHING-IN
UNIT : mm
INSTALLATION
1. Confirm the desired place to install the mirror and the basic
outline of the frame.
2. Pre-drill mounting holes by referring to the outline of the
frame and the sizes in the picture below.
3. Fix the Z clip and the WPS bracket to the wall with ST3.5x35
screws.
4. Fix the glass shelves to the WPS bracket with M8x8 screws.
5. Fix the mirror onto the Z clip.
6. Connect the wire from the defogger with the 220V/50Hz
power supply.
1.
2.
3. Z WPS
4. M8x8 WPS
5. Z
6. 220V/50Hz
220V/50HZ
780
609
762
171
498
295 295
256
116
1.
2.
USER MAINTENANCEUSER MAINTENANCE
1.
2.
Many cleansers contain abrasive and chemical substance
which is not suitable for cleaning stainless steel, enamel,
plating or plastic products. You may use mild cleansers or
soaps to clean the surfaces. Wipe any splashes of cleaner
solutions from the surface with clean soft cloth.
Maintain ventilation in the bathroom, and separate the dry
area from the damp one if conditions permit. Try to open
the door and windows of the bathroom and maintain good
ventilation.
1142822-T01-A