Kolpin Outdoors Arctic Cat Wildcat Roof Installation and operating instructions

© 2018 Kolpin Outdoors Inc. REV 02
Arctic Cat Wildcat Roof
P/N 1497
ASSEMBLY / OWNERS MANUAL
Before you begin, please read and understand t ese instructions. Also review t e box contents to
ensure all parts are accounted for.
Kolpi Outdoors, I c. | 9955 59t Ave N | Plymout , MN 55442
[phone] or [phone] | www.kolpin.com | customer[email protected]

2
© 2018 Kolpin Outdoors Inc. REV 02
BEFORE YOU BEGIN
T ank You and congratulations on your purc ase! Kolpin Roofs are t e most durable Roofs in t e industry. Wit
proper installation, care, and maintenance, your Kolpin roof will last for years to come! Before You Begin:
• Inspect t e contents of t e package to ensure all parts and tools are accounted for. If any ardware is missing, do
not return to t e store. Call Kolpin directly for assistance. Toll Free 1-877-956-5746.
• Please read and understand all assembly instructions, notices and warnings before assembling and operating your
Kolpin Roof.
• For proper installation, two people are ig ly recommended.
• Keep t ese instructions for future reference. Dealers: Provide owner manual to customer at time of purc ase.
• To facilitate installation, make sure your ve icle is clean and free of debris.
• All directions referring to rig t and left are w en t e rider is sitting on t e mac ine.
APPROXIMATE ASSEMBLY TIME: 30 mi utes
TOOLS REQUIRED FOR INSTALLATION:
• 4 mm ex socket or ex key
SAFETY INFORMATION
Our roofs were designed wit your safety in mind. Please read and understand all Cautions, Notices and Warnings in
t is manual before you begin.
If a y hardware is missi g, do ot retur to the store. Call Kolpi directly for assista ce.
Toll Free 1-877-956-5746.
TO AVOID SERIOUS INJURY OR DEATH:
1. ONLY INSTALL ROOFS THAT ARE DESIGNED FOR THE MAKE AND MODEL OF THE UTV. INSTALLA-
TION OF A ROOF THAT WAS NOT DESIGNED FOR THE UTV MAKE AND MODEL CAN IMPACT DURABIL-
ITY AND PERFORMANCE.
2. READ AND UNDERSTAND ROOF INSTRUCTION SHEETS AND UTV OWNER MANUAL BEFORE ROOF
INSTALLATION OR OPERATING THE VEHICLE.
3. PERIODICALLY CHECK FOR WEAR AND TIGHTNESS OF ALL FASTENERS. REPLACE OR RE-TORQUE
FASTENERS AS NECESSARY.
DANGER
! !

3
© 2018 Kolpin Outdoors Inc. REV 02
Kit Co te ts:
1
2
4 5
3
3

4
© 2018 Kolpin Outdoors Inc. REV 02
I stallatio Prep:
1. To facilitate installation, make sure t at your ve icle is clean and free of debris.
2. All directions referring to rig t and left are w en t e rider is sitting on t e mac ine.
I stallatio :
1. Attac Clamps (Item 2) using (1) M6 x 18mm Button
Head (Item 3), (1) M6 Lock Was er (Item 4) to t e
ROPS. (See Illustration 1-1. Do not tig ten at t is
time, you will need to make adjustments later.
2. Install t e Roof (Item 1) to t e Clamps (Item 2) using
(6) M6 x 18mm Button Head Screws (Item 3), (6) M6
Lock Was ers (Item 4), and (6) Domed S oulder
Was ers (Item 5) . Adjust t e position of all compo-
nents and tig ten all ardware to specified torque.
See Illustration 1-2 & 1-3.
Ill. 1-1
Ill. 1-2Ill. 1-3
6MM FASTENER TORQUE:
7 ft. lbs. (9 Nm)
O e Year Limited Warra ty
For t e period of one (1) year from t e purc ase date, Kolpin will replace for t e original purc aser, free of c arge, any part or parts
found upon examination by Kolpin to be defective in material, workmans ip, or bot .
All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by t e purc aser. If Kolpin
determines t at t e product must be returned to t e factory for credit, please call 1-877-956-5746 for a Return Merc andise Aut ori-
zation (RMA) number and s ipping instructions.
T is warranty does not apply to parts t at ave been damaged by accident, alteration, abuse, improper maintenance, normal wear,
or ot er causes beyond t e manufacturer’s control. In order to protect you and your ATV, certain parts of t e accessory system and/
or ardware are designed to fail w en t e equipment is over-stressed. Parts t at are lost due to loosening and improper maintenance
are not covered under warranty. T is warranty does not cover removal or reinstallation labor fees of t e plow system and related
components.
Perip eral products suc as engines, electric motors, and actuators may carry an original manufacturer’s warranty. Most ardware is
general in nature and is easily obtained locally. Be sure to replace wit minimum metric class 8.8 specification.