Kolpin Outdoors 53470 Instruction sheet

1
© 2021 Kolpin Outdoors Inc. REV 00
UTV Aluminum Bed Box
Product Instructions | Part No: 53470
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
[phone] or [phone] | kolpin.com | customerservi[email protected]
1
Item Qty Part Description
11UTV Aluminum Bed Box
22Adhesive Backed Foam Pads
32Spare Key for Lockable Latch (Not Shown)
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
instructions for future reference and part ordering information. Note: If any hardware is missing, do not return to the store.
Call us to help, toll free at 1-877-956-5746.
22
*Vehicle Specific Mounting Kits Sold Separately
Mounting Instructions:
Note: Please refer to instructions included with mounting kits (sold separately) for vehicle specific mounting
instructions. Visit Kolpin.com for full list of available mounts.
1. Identify mounting holes inside of box
that will be used to attach to vehicle
bed rails. Illustration 1-1 shows the
vehicle specific mounting holes on
the driver’s side.
Yamaha
Viking
Polaris
Ranger
Kawasaki Mule FX/FXT
& Can Am Defender
Ill. 1-1

2
© 2021 Kolpin Outdoors Inc. REV 00
2. Attach Adhesive Backed Foam Pads to each side
as shown in Illustration 1-2. This will protect the bed
rail surface from scratches and seal the un-used
mounting holes from dust and debris.
3. Cut small opening through the Adhesive Backed
Foam Pads for mounting hardware in identified loca-
tions specific to your vehicle.
4. Carefully place on vehicle and attach using vehicle
specific mounting hardware (sold separately).
Lid and Latch Adjustment Instructions:
1. Latch engagement can be adjusted by moving the
Latch Catches mounted inside the Lid up & down
and left to right. Adjusting up & down will also ad-
just the amount of compression on the Lid seal.
2. The Lid opening angle can be adjusted via the
lower gas shock mounting bolt.
Rhino Grip Flex Accessory Mount Instructions
(Optional - Not Included):
1. Kolpin Flex 1.5 (P/N 21570) and 3.0 (P/N 21571)
Rhino Grips can be mounted inside the box using
the 10 holes located in between the latches inside
the box, as shown in Illustration 1-3. These can be
helpful to carry items such as spare CVT belts,
tools, flashlights, cords, speakers, fire extinguish-
ers, etc.
Use and Care Information:
• Check the accessory mounts frequently and retighten if necessary.
• When this accessory becomes dirty, rinse thoroughly with cool water to remove loose dirt, then wipe with a clean cloth or sponge.
• Never use petroleum solvents such as gasoline, thinner, benzene, acid or alkaline cleaners.
For additional assistance, please contact Kolpin customer service department at [phone] or [phone]
or email [email protected]
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts
found upon examination by Kolpin to be defective in material, workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin
determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise Authori-
zation (RMA) number and shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear, or
other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory system and/or
hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and improper maintenance are
not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the accessory system and related
components. Most hardware is general in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 speci-
fication.
Ill. 1-2
Ill. 1-3Flex 1.5