Kolpin Outdoors Rhino Grip XL - Double Instruction sheet

© 2020 Kolpin Outdoors, Inc. Rev 04
Before you begin, read these instructions and check to be sure all parts and tools are accounted for.
Please retain these instructions for future reference and part ordering information. Note: If any hardware
is missing, do not return to the store. Call us to help, toll free at 877-956-5746.
Mounting Instructions -
1. Position the Rhino Grip mounting bases with a metal backer plate on the rack of the ATV where desired.
2. Run the ¼” truss head bolts provided through the main base/metal backer on the rear rack. Place a
second metal backer plate under the rack tube and secure with nylon
nuts.
3. Tighten the (4) truss head bolts evenly. Note: Be sure not to over
tighten the bolts, as too much torque can over stress the base and
cause the grip to fail.
4. Place the connector into the doubler plate.
5. Place the M6 black nylon locking nut into the bottom of the
connector, so that the nylon part of the nut is facing out towards you.
No.
Description
QTY.
Spare P/N
1
Plastic Mounting Base
2
71541
2
Doubler Plate
2
71503A
3
Connector
2
71516
4
Metal Backer Plate
4
71513
5
Rhino Grip
4
71511
6
Adjustment Knob
4
71501
7
Kwik Clip - Small
4
71509
No.
Description
QTY.
Spare P/N
8
Kwik Clip - Large
2
71540
9
Rubber Strap
4
87010
10
¼” – 20 x 1.50” Truss Bolt
8
11
¼” – 20 Nylon Nut
8
12
Kolpin Logo
6
13
M6 – Black Nylon Nut
2
14
M6 Flat Head Machine Screw
2
Rhino Grip XL - Double
Product Instructions | Part No: 21515
5
2
8
1
These grips are designed to quickly &
easily mount to the rear rack of an
ATV.
Note: Hardware provided is
based on the biggest tube
diameter. You may want to cut
the excess threads from the grip
for safety & to prevent damage to
your machine.
To tilt the grip simply loosen
the adjustment knob, tilt the
grip to the angle of your
choice, & retighten. NOTE:
Lighter objects ONLY can be
carried in the Full-Tilt
position.
9
3
2

© 2020 Kolpin Outdoors, Inc. Rev 04
6. Take the flat head machine screw and tipping the doubler plate so
that the connector is facing upwards; start twisting the machine screw
until it engages the nut in the connector. Tighten securely. (Image
shown to the right)
7. Place the 2 supplied Kolpin emblems over the flat head screw.
8. Insert the doubler plate assembly into the mounting base, already
attached to ATV, and position as desired.
9. Secure the double plate assembly to the mounting base using
the Kwik clip provided. (Image shown to the right)
10. Insert the Rhino Grips in the desired position on the doubler
plate and secure using the Kwik Clips provided. NOTE: Grip
can rotate 360° to accommodate any angle, and the grip can
tilt 0° to 180° at 45° increments.
NOTE: The Rhino Grip XL Double can be used for many light-duty applications. DO NOT force objects into
the grip as over stressing component parts can cause damage that is not immediately noticed. For a custom
fit, the grips can be trimmed with a sharp knife. Balancing the weight in each grip is also important for safe
operation. For the Ultimate protection in transporting firearms, we recommend using our Ratcheting Rhino
Grips or any of our Patented Kolpin Gun Boots and brackets.
For additional assistance, please contact Kolpin Customer service department at 877-956-5746 or 763-
478-5800 or email [e-mail]
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser,
free of charge, any part or parts found upon examination by Kolpin to be defective in material,
workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be done
by the purchaser. If Kolpin determines that the product must be returned to the factory for credit,
please call 877-956-956-5746 for a Return Merchandise Authorization (RMA) number and shipping
instructions.