Krone Swadro TC 1000 User manual

Original operating instructions
Rotary Rake
Swadro TC 1000
(from serial no.: 994 352)
Order no.: 150 000 631 04 us
20.06.2018

Table of Contents
2
Pos: 2 /Layout Mo dule /---------------Seitenumbruch---------------- @ 0\mod_1196175311 226_0.docx @ 4165 @ @ 1

Table of Contents
3
Pos: 3 /Layout Mo dule /Inhaltsverzei chnis @ 0\mod_1196861 555655_78.doc x @ 15165 @ 1 @ 1
1 Table of Contents
1Table of Contents ................................................................................................................................... 3
2To this Document ................................................................................................................................... 6
2.1 Validity ................................................................................................................................................ 6
2.2 Re-Ordering ........................................................................................................................................ 6
2.3 Further applicable documents ............................................................................................................ 6
2.4 Target group of this document ........................................................................................................... 6
2.5 How to use this document .................................................................................................................. 6
2.5.1 Directories and References ........................................................................................................ 6
2.5.2 Direction Information ................................................................................................................... 7
2.5.3 Term “Machine” ........................................................................................................................... 7
2.5.4 Figures ........................................................................................................................................ 7
2.5.5 Scope of Document ..................................................................................................................... 7
2.5.6 Means of representation ............................................................................................................. 7
2.5.7 Conversion table ....................................................................................................................... 10
3Safety ..................................................................................................................................................... 12
3.1 Intended use ..................................................................................................................................... 12
3.2 Service life of the machine ............................................................................................................... 12
3.3 Basic safety instructions ................................................................................................................... 12
3.3.1 Importance of the operating instructions ................................................................................... 12
3.3.2 Personnel qualification .............................................................................................................. 13
3.3.3 Children in danger ..................................................................................................................... 13
3.3.4 Coupling .................................................................................................................................... 13
3.3.5 Structural changes to the machine ........................................................................................... 13
3.3.6 Additional equipment and spare parts ...................................................................................... 14
3.3.7 Workstations on the Machine .................................................................................................... 14
3.3.8 Operational safety: Technically perfect condition ..................................................................... 14
3.3.9 Danger zones ............................................................................................................................ 16
3.3.10 Keeping safety devices functional ............................................................................................. 18
3.3.11 Personal Protective Equipment ................................................................................................. 18
3.3.12 Safety signs on the machine ..................................................................................................... 19
3.3.13 Traffic safety .............................................................................................................................. 19
3.3.14 Parking the machine safely ....................................................................................................... 20
3.3.15 Consumables ............................................................................................................................ 20
3.3.16 Sources of danger on the machine ........................................................................................... 21
3.3.17 Dangers associated with certain activities: Work on the machine ............................................ 22
3.3.18 Dangers associated with certain activities: Working on wheels and tyres ................................ 23
3.3.19 Behaviour in hazardous situations and when accidents occur ................................................. 23
3.4 Safety routines ................................................................................................................................. 24
3.4.1 Stopping and securing the machine .......................................................................................... 24
3.4.2 Supporting lifted machine and machine parts securely ............................................................ 24
3.4.3 Safely checking the oil level and changing the oil and filter element ........................................ 25
3.5 Safety stickers on the machine ........................................................................................................ 26
3.5.1 Position and meaning of the safety stickers on the machine .................................................... 26
3.5.2 Re-Ordering Safety Labels and Information Labels .................................................................. 30
3.5.3 Attaching Safety Labels and Information Labels ...................................................................... 30
3.5.4 Contact for KRONE NORTHAMERICA .................................................................................... 30
3.6 Safety Equipment ............................................................................................................................. 31

Table of Contents
4
3.6.1 SMV Emblem ............................................................................................................................ 31
3.6.2 Support Jack ............................................................................................................................. 31
3.6.3 Safety chain .............................................................................................................................. 32
3.6.4 Overload protection ................................................................................................................... 32
3.6.5 Wheel chocks ............................................................................................................................ 33
4Machine Description ............................................................................................................................ 34
4.1 Machine overview ............................................................................................................................. 34
4.2 Identification Plate ............................................................................................................................ 35
4.3 Information Required for Questions and Orders .............................................................................. 35
5Technical data ....................................................................................................................................... 36
5.1 Consumables ................................................................................................................................... 38
5.2 Tyres................................................................................................................................................. 38
6Control and Display Elements ............................................................................................................ 39
7Commissioning ..................................................................................................................................... 41
7.1 First installation ................................................................................................................................ 41
7.2 Preparations on tractor ..................................................................................................................... 42
7.2.1 Adjusting the lower suspension arms ....................................................................................... 42
7.3 Connecting the Lower Link ............................................................................................................... 43
7.4 Height of tractor lower suspension arms .......................................................................................... 43
7.5 PTO shaft ......................................................................................................................................... 44
7.5.1 Length adjustment ..................................................................................................................... 44
7.6 Regulating direction of travel ............................................................................................................ 45
7.7 Checking the Locking of the Transport Position .............................................................................. 46
7.8 Checking / Setting Distance Between Tine Arm and Outrigger Arm ............................................... 47
7.9 Basic Setting of Rotor Inclination ..................................................................................................... 48
8Start-up .................................................................................................................................................. 49
8.1 Connect the machine to the tractor .................................................................................................. 50
8.2 Connecting the hydraulic lines ......................................................................................................... 51
8.3 Lighting connection .......................................................................................................................... 52
8.4 Connecting the Operation ................................................................................................................ 53
8.5 Install the PTO shaft ......................................................................................................................... 55
8.6 Using the safety chain ...................................................................................................................... 56
8.7 Swivelling parking support into transport position ............................................................................ 58
9Driving and Transport .......................................................................................................................... 59
9.1 Preparations for road travel .............................................................................................................. 60
9.2 Driving on Slopes ............................................................................................................................. 61
9.3 Switching off the machine ................................................................................................................ 62
10 Operation ............................................................................................................................................... 63
10.1 Removing the tine protections from the tine tips .............................................................................. 63
10.2 Lowering Outrigger Arms into Working Position .............................................................................. 64
10.2.1 In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design ...................................... 64
10.3 Swivel tine arms to working position. ............................................................................................... 65
10.4 Move the hoop guards to the working position. ............................................................................... 67
10.5 Setting the Working Height .............................................................................................................. 67
10.6 Adjusting the Working Width ............................................................................................................ 69
10.7 Move the hoop guards to transport position. .................................................................................... 70
10.8 Swivelling tine arms into transport position ...................................................................................... 71
10.9 Raising Outrigger Arms into Transport Position ............................................................................... 72

Table of Contents
5
10.9.1 In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design ...................................... 73
10.10 Protecting the tine tips (transport position and rotary rake switched off) ......................................... 74
10.11 Selecing Rotor Operation ................................................................................................................. 75
10.11.1 In Case of Electro-Hydraulic Single-Rotor Lifting Mechanism Design ...................................... 75
10.12 Travelling speed und drive speed .................................................................................................... 76
10.13 Swathing ........................................................................................................................................... 76
11 Settings ................................................................................................................................................. 77
11.1 To adjust the rotor running gear ....................................................................................................... 78
11.2 Adjustable throttles ........................................................................................................................... 80
11.3 Calibrating the Sensor – with Electrical Rotor Height Adjustment Design ...................................... 81
11.4 Setting the Spring Relief .................................................................................................................. 82
12 Maintenance .......................................................................................................................................... 83
12.1 Spare Parts ...................................................................................................................................... 83
12.2 Maintenance table ............................................................................................................................ 84
12.3 Tightening torques ............................................................................................................................ 85
12.3.1 Metric Thread Screws with Control Thread............................................................................... 85
12.3.2 Metric Thread Screws with Fine Thread ................................................................................... 86
12.3.3 Metric Thread Screws with Countersunk Head and Hexagonal Socket ................................... 86
12.3.4 Tightening Torques for Locking Screws and Bleed Valves on the Gearboxes ......................... 87
12.4 Tyres................................................................................................................................................. 88
12.4.1 Checking and maintaining tyres ................................................................................................ 88
12.4.2 Torque of Wheels on the Running Gear ................................................................................... 89
12.5 Replacing the tine arms (in case of repair) ...................................................................................... 90
12.6 Replacing the tines (in case of repairs) ............................................................................................ 92
12.6.1 Testing the Screws on the Tines ............................................................................................... 93
13 Maintenance – lubrication ................................................................................................................... 94
13.1 Lubrication Points on the Universal Shafts ...................................................................................... 94
13.2 Lubrication Points on the Machine ................................................................................................... 96
14 Maintenance - hydraulic system ....................................................................................................... 101
14.1 Hydraulic circuit diagram ................................................................................................................ 101
15 Maintenance - Gearbox ...................................................................................................................... 102
15.1 Main gearbox .................................................................................................................................. 103
16 Special equipment .............................................................................................................................. 104
16.1 Tine loss safeguard ........................................................................................................................ 104
16.2 Chain for height restriction of suspension arms ............................................................................. 105
17 Placing in Storage .............................................................................................................................. 106
17.1 At the End of the Harvest Season .................................................................................................. 106
17.2 Before the Start of the New Season ............................................................................................... 107
18 Malfunctions - Causes and Remedies .............................................................................................. 108
19 Disposal of the machine .................................................................................................................... 110
19.1 Disposal of the machine ................................................................................................................. 110
20 Appendix ............................................................................................................................................. 111
20.1 Hydraulic circuit diagram ................................................................................................................ 111
20.2 Circuit Diagram ............................................................................................................................... 113
21 Index .................................................................................................................................................... 114
Pos: 4 /Layout Mo dule /---------------Seitenumbruch---------------- @ 0\mod_1196175311 226_0.docx @ 4165 @ @ 1

To this Document
6
Pos: 5 /Überschrif ten/Überschrifte n 1/U-Z/Zu diesem Doku ment @ 107\ mod_1334231929 021_78.docx @ 9 65257 @ 1 @ 1
2 To this Document
Pos: 6 /BA/Einleit ung/Gültig keit/Schwader/Gültig keit Swadro TC 1000 @ 334\ mod_14292 55156461_78.d ocx @ 2549415 @ 2 @ 1
2.1 Validity
These operating instructions apply to rotor rakes of series:
Swadro TC 1000
Pos: 7.1 /Überschrift en/Überschrift en 2/K-O/N/N achbestell ung (Nachbestellu ng dieses Do kuments) @ 349\ mod_143635 5974813_78.doc x @ 2625865 @ 2 @ 1
2.2 Re-Ordering
Pos: 7.2 /BA/Zu di esem Do kument/Nachbestellu ng_Text @ 512 \mod_15 02374195211_78. docx @ 35067 37 @ @ 1
If this document has become unusable in whole or in part, you can order a replacement, quoting
the document number on the cover sheet. Contact data can be found in the chapter “Contact
persons”.
The document can additionally be downloaded via the KRONE Media Center
http://www.mediathek.krone.de//.
Pos: 8 /Überschrif ten/Überschrifte n 2/K-O/M/Mitg eltende Doku mente @ 187 \mod_1380113 031071_78.doc x @ 1609664 @ 2 @ 1
2.3 Further applicable documents
Pos: 9 /BA/Zu di esem Dokume nt/Mitgeltende Do kumente_Einf ührungssatz_alle Maschinen @ 187\mod_ 13801139404 83_78.docx @ 160 9940 @ @ 1
To ensure that the machine is used safely and as intended, observe the following further
applicable documents:
Pos: 10 /BA/Zu die sem Dokum ent/Mitgeltende D okumente_B etriebsanleitung(e n) Gelenkwelle( n) @ 347\ mod_143558857 2591_78.doc x @ 2616249 @ @ 1
– Operating instructions of universal shaft(s)
Pos: 11 /Überschri ften/Überschrift en 2/U-Z/Z/Zi elgruppe dies es Dokuments @ 187\mod_1 380113123454_7 8.docx @ 16 09723 @ 2 @ 1
2.4 Target group of this document
Pos: 12 /BA/Zu die sem Dokum ent/Zielgruppe @ 345\mod_1 43434824690 2_78.docx @ 2 606935 @ @ 1
This document aims at the operators of the machine fulfilling the minimum requirements of
personnel qualification; refer to chapter entitled Safety “Personnel Qualification”.
Pos: 13.1 /Übersc hriften/Übersc hriften 2/P-T/ SSo benutzen Sie dieses Doku ment @ 188\ mod_13805483 50021_78.doc x @ 1614365 @ 2 @ 1
2.5 How to use this document
Pos: 13.2 /Übersc hriften/Übersc hriften 3/U-Z/V erzeichnisse und Verweise @ 336\mod_1429 854437094_7 8.docx @ 2556 421 @ 3 @ 1
2.5.1 Directories and References
Pos: 13.3 /BA/Zu diesem Doku ment/So benutze n Sie dieses Do kument_Verzeic hnisse und Ver weise_Text @ 333\mod_ 14290853784 08_78.docx @ 254 4425 @ @ 1
Table of contents/headers:
The table of contents as well as the headers in this instruction are used for quick navigation in
the chapters.
Index directory:
In the index directory, you can find information on the desired subject via catchwords which are
in alphabetical order. The index directory can be found on the last page of this instruction.
Cross references:
Cross references to another place in the operating instructions or to another document are in
the text and specify the chapter and subchapter or section. The designation of subchapters or
sections is presented in quotation marks.
Example:
Check that all screws on the machine are tight, refer to chapter Maintenance, “Tightening
Torques”.
The subchapter or the section can be found via an entry in the table of contents and in the index
directory.
Pos: 13.4 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_119617 5311226_0.docx @ 4165 @ @ 1

To this Document
7
Pos: 13.5 /BA/Zu diesem Doku ment/Richtungsanga ben_mit Üb erschrift 3. Ebe ne @ 311\ mod_1418209 262291_78.docx @ 2405467 @ 3 @ 1
2.5.2 Direction Information
Direction information in this document such as front, rear, right and left always applies in the
direction of travel.
Pos: 13.6 /Übersc hriften/Übersc hriften 3/A-E/B /Begriff "Masc hine" @ 337\ mod_1430721887 716_78.doc x @ 2563575 @ 3 @ 1
2.5.3 Term “Machine”
Pos: 13.7 /BA/Zu diesem Doku ment/Begriff Masc hine_Kreiselsc hwader @ 34 4\mod_14332 47257322_78. docx @ 25980 46 @ @ 1
Throughout the rest of this document, the “rotor rake” will also be referred to as the “machine”.
Pos: 13.8 /Übersc hriften/Übersc hriften 3/A-E/A /Abbildungen _Darstellungs mittel @ 336\m od_14301339190 63_78.docx @ 2558462 @ 3 @ 1
2.5.4 Figures
Pos: 13.9 /BA/Zu diesem Doku ment/Abbildung en_Text @ 33 6\mod_143013 4111209_78.d ocx @ 255849 3 @ @ 1
The figures in this document do not always represent the exact machine type. The information
which refers to the figure always corresponds to the machine type of this document.
Pos: 13.10 /Übersc hriften/Üb erschriften 3/U-Z/U mfang des Do kuments @ 346\mod_14349 79896995_78.d ocx @ 261136 6 @ 3 @ 1
2.5.5 Scope of Document
Pos: 13.11 /BA/Z u diesem Do kument/Umfang des Dokuments_alle Beipacks und Varianten en thalten_Te xt @ 346\mod_1 43497946022 6_78.docx @ 2 611335 @ @ 1
In addition to standard equipment, accessories kits and versions of the machine are described
in this document. Your machine may deviate from this document.
Pos: 13.12 /Übersc hriften/Überschrif ten 3/A-E/D /Darstellungs mittel @ 336\ mod_142986 5448625_78.doc x @ 2556625 @ 3 @ 1
2.5.6 Means of representation
Pos: 13.13 /Übersc hriften/Zwisch enüberschrifte n/P-T/Symb ole im Text @ 336\mod_143 0121354111_78.d ocx @ 255753 9 @ @ 1
Icons in the text
Pos: 13.14 /BA/Z u diesem Do kument/Darstellung smittel_ohne Hi nweis und Warnung_BA @ 3 39\mod_143 1002650179_7 8.docx @ 25 70965 @ @ 1
In this document, the following means of representation are used:
Action step
A bullet point () designates an action step you have to perform, as for example:
• Set the left outside mirror.
Sequence of actions
Several bullet points () located in front of a sequence of action steps identify a sequence of
actions to be performed step by step, as for example:
• Loosen counter nut.
• Set the screw.
• Tighten counter nut.
List
Dashes (-) identify lists such as, for example:
– Brakes
– Steering
– Lighting
Pos: 13.15 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1

To this Document
8
Pos: 13.16 /Übersc hriften/Zwisch enüberschrifte n/P-T/Symb ole in Abbildunge n @ 336\m od_143012145537 9_78.docx @ 2557570 @ @ 1
Symbols in figures
Pos: 13.17 /BA/Z u diesem Do kument/Darstellungs mittel_Übersi cht Symbole_BA @ 329\m od_14271930882 97_78.docx @ 2523598 @ @ 1
To visualize parts and actions steps, the following icons are used:
Icon
Explanation
1
Reference sign for part
I
Position of a part (e.g. move from pos. I to pos. II)
X
Dimensions (e.g. B = width, H = height, L = length)
Action step: Tighten screws with torque key with specified tightening torque
Direction of motion
Direction of travel
opened
closed
enlargement of display detail
Framings, dimension line, dimension line limitation, reference line for visible parts
or visible mounting material
Framings, dimension line, dimension line limitation, reference line for covered
parts or covered mounting material
Laying routes
LH
Left-hand machine side
RH
Right-hand machine side
Pos: 13.18 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1

To this Document
9
Pos: 13.19 /Übersc hriften/Zwisch enüberschrifte n/U-Z/Warn hinweise_Zu diese m Dokument @ 337\mod _1430720690194_ 78.docx @ 25 63366 @ @ 1
Warning signs
Pos: 13.20 /BA/Z u diesem Do kument/Warnhinweis e_Zu diesem Dokument_T ext @ 337\ mod_1430720301 162_78.doc x @ 2563335 @ @ 1
Warning
WARNING! - Type and source of hazard!
Effect: Injuries, serious material damage.
• Measures for hazard prevention.
Caution
CAUTION! - Type and source of hazard!
Effect: Damage to property.
• Measures for risk prevention.
Pos: 13.21 /Übersc hriften/Zwisch enüberschrifte n/F-J/Hinw eise mit Infor mationen und Em pfehlungen_Zu diesem Dokume nt @ 337\mo d_14307217345 82_78.docx @ 2 563548 @ @ 1
Notes with information and recommendations
Pos: 13.22 /BA/Z u diesem Do kument/Hinweise mit Informatio nen und Empfehl ungen_Text @ 337\mod_143 0721371455_ 78.docx @ 2 563487 @ @ 1
Note
Note
Effect: Economic benefit of the machine.
• Measures to be performed.
Pos: 13.23 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.doc x @ 4165 @ @ 1

To this Document
10
Pos: 13.24 /BA/Z u diesem Do kument/Umrechn ungstabelle metrisc hes Syste m auf US-S ystem_Überschri ft 3. Ebene und Einleitungssatz @ 342\mod_1 43273701169 4_78.docx @ 2 590505 @ 3 @ 1
2.5.7 Conversion table
By means of the following table, metric units can be converted into US units.
Pos: 13.25 /BA/Z u diesem Do kumentUmrechn ungstabelle metri sches Syste m auf US-Syst em @ 503\m od_1496835262 477_78.docx @ 3461203 @ @ 1
Quantity
SI Units (Metric)
Factor
Inch-Pound Units
Unit Name
Abbreviation
Unit Name
Abbreviation
Area
hectare
ha
2.47105
acre
acres
Flow
liters per
minute
L/min
0.2642
US gallon per
minute
gpm
cubic meter
per hour
m³/h
4.4029
Force
newton
N
0.2248
pound-force
lbf
Length
millimeter
mm
0.03937
inch
in.
meter
m
3.2808
foot
ft.
Power
kilowatt
kW
1.3410
horsepower
hp
Pressure
kilopascal
kPa
0.1450
pound per
square inch
psi
megapascal
MPa
145.0377
bar (non-SI)
bar
14.5038
Torque
newton meter
Nm
0.7376
pound-foot or
foot-pound
ft∙lbf
8.8507
pound-inch or
inch-pound
in∙lbf
Temperature
degree
Celsius
°C
°Cx1.8+32
degree
Fahrenheit
°F
Velocity
meter per
minute
m/min
3.2808
foot per
minute
ft/min
meter per
second
m/s
3.2808
foot per
second
ft/s
kilometer per
hour
km/h
0.6215
miles per
hour
mph
Volume
liter
L
0.2642
US gallon
US gal.
milliliter
ml
0.0338
US ounce
US oz.
cubic
centimeter
cm³
0.0610
cubic inch
in³
Weight
kilogram
kg
2.2046
pound
lbs
Pos: 14 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1

To this Document
11
Pos: 15 /Layout M odule /Dies e Seite ist bewusst freigelassen worden. @ 1\mod_1201 783680373_78. docx @ 54443 @ @ 1
This page has been left blank deliberately.
Pos: 16 /Layout M odule /---------------Seitenumbruch---------------- @ 0\mod_119617531 1226_0.docx @ 4165 @ @ 1

Safety
12
Pos: 18.1 /Übersc hriften/Übersc hriften 1/P-T/ Sicherheit @ 0\ mod_119556 6748646_78.doc x @ 635 @ 1 @ 1
3 Safety
Pos: 18.2 /Übersc hriften/Übersc hriften 2/A-E/B Bestimmungsg emäße Ver wendung @ 103\ mod_1332169 199326_78.doc x @ 940071 @ 2 @ 1
Ver
3.1 Intended use
Pos: 18.3 /BA/Einl eitung/Besti mmungsgemäßer Gebrauch/Sc hwader/Bestimm ungsgemäßer G ebrauch Sch wader @ 1\ mod_120221570 4310_78.doc x @ 57818 @ @ 1
The rotary rake is built exclusively for conventionaluse in agricultural work (intended use).
Pos: 18.4 /Übersc hriften/Übersc hriften 2/K-O/NN utzungsdauer der Maschin e @ 318\mod _1423658430909 _78.docx @ 2465744 @ 2 @ 1
3.2 Service life of the machine
Pos: 18.5 /BA/Einl eitungNutzungs dauer der M aschine_Text @ 5 36\mod_15 21559267125 _78.docx @ 3632 646 @ @ 1
– The service life of this machine strongly depends on proper use and maintenance as well as
the operating conditions.
– Permanent operational readiness as well as long service life of the machine can be
achieved by observing the instructions and notes of these operating instructions.
– After each season of use, the machine must be checked thoroughly for wear and other
damage.
– Damaged and worn parts must be replaced before placing the machine into service again.
– After the machine has been used for five years, carry out full technical inspection of the
machine. According to the results of this inspection, a decision concerning the possibility of
reuse of the machine should be taken.
Pos: 18.6.1 /Übersc hriften/Übersc hriften 2/F-J/G Grundlegen de Sicherheitshi nweise @ 186\ mod_138000 9482364_78.doc x @ 1606585 @ 2 @ 1
3.3 Basic safety instructions
Pos: 18.6.2 /BA/ Sicherheit/1. Gr undlegende Sich erheitshinweis e/Nichtbeacht ung der SiHi und WaHi (Einf ührtext Grundl egende SiHi)_fuer alle @ 175\ mod_1372834 139379_78.doc x @ 1504793 @ @ 1
Non-compliance with the safety instructions and warnings
Non-compliance with the safety instructions and warnings may result in injuries and damage to
the environment and property.
Pos: 18.6.3 /Übersc hriften/Übersc hriften 3/A-E /B/Bedeutung der Betriebsanl eitung @ 186\ mod_138001 1391583_78.doc x @ 1606670 @ 3 @ 1
3.3.1 Importance of the operating instructions
Pos: 18.6.4 /BA/ Sicherheit/1. Gr undlegende Sich erheitshinweis eBedeutung d er Betriebsanleit ung_fuer alle @ 451\mod_1 46279625572 3_78.docx @ 30 64819 @ @ 1
The operating instructions are an important document and a part of the machine. They are
aimed at the user and contain safety-relevant information.
Only the procedures indicated in the operating instructions are reliable. If the operating
instructions are not observed, people may be seriously injured or killed.
• Before using the machine for the first time, read and follow all the “Basic Safety Instructions”
in the Safety chapter.
• Before working, also read and observe the respective sections in the operating instructions.
• Keep the operating instructions ready to hand for the user of the machine.
• Hand over the operating instructions to subsequent users.
Pos: 18.6.5 /La yout Module /---------------Seitenumbruch---------------- @ 0\mod_119617 5311226_0.doc x @ 4165 @ @ 1

Safety
13
Pos: 18.6.6 /Übersc hriften/Übersc hriften 3/P-T/ PPersonalqu alifikation @ 18 7\mod_13800 11550253_78.d ocx @ 1606703 @ 3 @ 1
3.3.2 Personnel qualification
Pos: 18.6.7 /BA/ Sicherheit/1. Gr undlegende Sich erheitshinweis e/Personalqualifi kation_BA_fu er alle @ 176\ mod_137284 0611484_78.d ocx @ 150563 9 @ @ 1
If the machine is not used properly, people may be seriously injured or killed. To avoid
accidents, each person who works with the machine must satisfy the following minimum
requirements:
– He is physically capable of controlling the machine.
– He can work safely with the machine in accordance with these operating instructions.
– He understands the method of operation of the machine within the scope of his work and
can identify and avoid the dangers associated with the work.
– He has read the operating instructions and can implement the information in the operating
instructions accordingly.
– He is familiar with driving vehicles safely.
– For road travel he has adequate knowledge of the highway code and has the stipulated
driving licence.
Pos: 18.6.8 /Übersc hriften/Übersc hriften 3/K-O /KKinder in G efahr @ 187\m od_1380011650 765_78.doc x @ 1606732 @ 3 @ 1
3.3.3 Children in danger
Pos: 18.6.9 /BA/ Sicherheit/1. Gr undlegende Sich erheitshinweis e/Kinder in Gefa hr_angebaut e und angehängte Maschi nen @ 176\mod_ 13728425409 41_78.docx @ 15 05758 @ @ 1
Children cannot assess danger and behave unpredictably.
As a result, children are especially at risk.
• Keep children away from the machine.
• Keep children away from consumables.
• Especially before starting up and moving the machine, ensure that there are no children in
the danger zone.
Pos: 18.6.10 /Üb erschriften/Üb erschriften 3/A- E/A/Ankuppel n @ 12\mod_12 24678928406_ 78.docx @ 1 52806 @ 3 @ 1
3.3.4 Coupling
Pos: 18.6.11 /B A/Sicherheit/1. Gru ndlegende Sicherheitshin weiseMaschine sic her ankupp eln_angebaute u nd angehängte M aschinen_ohn e Vorsätze @ 455\mod_14 64250456943_ 78.docx @ 308 4986 @ @ 1
When tractor and machine are not correctly connected, there is a risk of causing serious
accidents.
• Observe all operating instructions when connecting:
– The operating instructions of the tractor
– The operating instructions of the machine
– The operating instructions of universal shaft
• Observe the changed driving behaviour of the combination.
Pos: 18.6.12 /Üb erschriften/Üb erschriften 3/A- E/B/Bauliche Ä nderungen an d er Maschine @ 187\mod_ 1380011874486_ 78.docx @ 160 6786 @ 3 @ 1
3.3.5 Structural changes to the machine
Pos: 18.6.13 /B A/Sicherheit/1. Gru ndlegende Sic herheits hinweiseBauliche Ä nderungen a n der Maschine _fuer alle @ 453 \mod_146398 8143077_78.doc x @ 3077215 @ @ 1
Structural changes and enhancements may impair the functionality and operational safety of the
machine. Thus there is a risk of serious injuries or death.
Structural changes and enhancements are not permitted.
Pos: 18.6.14 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
14
Pos: 18.6.15 /Üb erschriften/Üb erschriften 3/U-Z/Z usatzausrüs tungen und Ers atzteile @ 1 87\mod_1380 012000801_78. docx @ 1606819 @ 3 @ 1
3.3.6 Additional equipment and spare parts
Pos: 18.6.16 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseZusatzausrüs tungen und Ersa tzteile_fuer all e @ 453\ mod_1463988536 645_78.doc x @ 3077246 @ @ 1
Additional equipment and spare parts which do not comply with the requirements of the
manufacturer may impair the operational safety of the machine and cause accidents.
• To ensure operational safety, use original parts or standard parts which correspond to the
requirements of the manufacturer.
Pos: 18.6.17 /Üb erschriften/Üb erschriften 3/A- E/AArbeitsplätz e an der Masc hine @ 453\m od_146398863 4725_78.docx @ 3077278 @ 3 @ 1
3.3.7 Workstations on the Machine
Pos: 18.6.18 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Arbeitsplätz e - Kontrolle über die fahre nde Maschine _Selbstfahrer @ 1 76\mod_13 72850001832_78. docx @ 15064 13 @ @ 1
Control of the moving machine
The moving machine requires the driver to react quickly at any time. Otherwise, the machine
may move in an uncontrolled manner and seriously injure or kill people.
• Start the engine from the driver's seat only.
• Never leave the driver's seat while the machine is moving.
• Never climb in or out of the machine while it is moving.
Pos: 18.6.19 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Arbeitsplätz e - Mitfahren de Personen_f uer alle @ 176\ mod_1372850 186689_78.doc x @ 1506442 @ @ 1
Passengers
Passengers may be seriously injured by the machine or fall off the machine and get run over.
Ejected objects may strike and injure passengers.
• Never let people ride on the machine.
Pos: 18.6.20 /Üb erschriften/Üb erschriften 3/A- E/B/Betriebssic herheit: Tec hnisch einwandfrei er Zustand @ 187\mod_138 0012216128_ 78.docx @ 16068 77 @ 3 @ 1
3.3.8 Operational safety: Technically perfect condition
Pos: 18.6.21 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Betriebssic herheit - Betri eb nur nach or dnungsgemäßer I nbetriebnahm e_fuer alle @ 1 76\mod_1372 854464728_7 8.docx @ 150653 0 @ @ 1
Operation only when the machine has been started up correctly
If the machine is not started up correctly according to these operating instructions, the
operational safety of the machine is not ensured. As a result, accidents may occur and people
may be seriously injured or killed.
• Do not use the machine unless it has been started up correctly, see chapter Start-up.
Pos: 18.6.22 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Betriebssich erheit - Tec hnisch einwan dfreier Zustand d er Maschine_fu er alle @ 176\ mod_1372854 718958_78.d ocx @ 1506559 @ @ 1
Technically perfect condition of the machine
Improper maintenance and adjustment may affect the operational safety of the machine and
cause accidents. As a result, people may be seriously injured or killed.
• Perform all maintenance and adjustment work according to the chapters Maintenance and
Adjustment.
• Before performing any maintenance or adjustment work, shut down and safeguard the
machine, see chapter Safety "Shutting down and safeguarding the machine".
Pos: 18.6.23 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
15
Pos: 18.6.24 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Betriebssich erheit - Gefa hr durch Schä den an der Masc hine Wender @ 276\mod_14 04743734630 _78.docx @ 20 75019 @ @ 1
Danger resulting from damage to the machine
Damage to the machine may impair the operational safety of the machine and cause accidents.
As a result, people may be seriously injured or killed. The following parts of the machine are
particularly important for safety:
– Steering
– Safety devices
– Connecting devices
– Lighting
– Hydraulic system
– Tyres
– Universal shaft
If there are doubts about the operational safety of the machine, for example due to leaking
consumables, visible damage or an unexpected change to the driving behaviour:
• Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• Immediately eliminate potential causes of damage, for example heavy soiling, or tighten
slack screws.
• If possible, repair the damage according to these operating instructions.
• In the case of damage which may affect operational safety and cannot be repaired
according to these operating instructions: Have damage repaired by a qualified service
centre.
Pos: 18.6.25 /B A/Sicherheit/1. Gru ndlegende Sic herheitshin weise/Betriebssic herheit - Tec hnische Grenz werte_mit Achs- und Stützlast en, ohne Transpor thöhe @ 321\ mod_142485 4472697_78.doc x @ 2480958 @ @ 1
Technical limit values
When the technical limit values of the machine are not met, the machine may be damaged.
Thus there is a risk of accidents, serious injuries or death. With regard to safety, it is of special
importance to comply with the following technical limit values:
– Gross vehicle weight
– Permissible axle load
– Permissible supported load
– Maximum permissible speed
• Meet limit values, refer to chapter entitled “Technical Data”.
Pos: 18.6.26 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
16
Pos: 18.6.27 /Üb erschriften/Üb erschriften 3/F-J/ GGefahre nbereiche @ 18 7\mod_13800 12427290_78.d ocx @ 1606906 @ 3 @ 1
3.3.9 Danger zones
Pos: 18.6.28 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseGefahrenber eiche_Einleitu ng_fuer alle @ 4 53\mod_14 63991292572 _78.docx @ 3077 571 @ @ 1
When the machine is switched on, a danger zone may be created around this machine.
To avoid getting into the danger zone of the machine, maintain at least the safety distance.
If the safety distance is not followed, people may be seriously injured or killed.
• Do not switch on the drives and the engine until you are sure that no one has ignored the
safety distance.
• If people ignore the safety distance, switch off the drives.
• Stop the machine in the shunting operation and field mode.
Pos: 18.6.29 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Gefahrenb ereiche rund um Wender, Sch wader T2 @ 294 \mod_14 11639162229_78. docx @ 23135 68 @ @ 1
If the danger zone is not observed, people may be seriously injured or killed.
• Keep people away from the danger zone of the tractor and the machine.
• Do not switch on the drives and engine until there is nobody in the danger zone.
The safety clearance is:
– 30 metres in front of the machine while in operation.
– 5 metres in front of the machine when at a standstill.
– 3 metres on either side of the machine.
– 5 metres behind the machine.
• Before working in front of and behind the tractor and in the danger zone of the machine:
Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine". This also applies to brief inspection work. Many serious
accidents in front of and behind the tractor and the machine occur due to negligence and
running machines.
• Consider the information in all relevant operating instructions.
– The operating instructions for the tractor
– The operating instructions for the machine
– The operating instructions for the universal shaft
Pos: 18.6.30 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
17
Pos: 18.6.31 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseGefahrenber eich zwischen Tr aktor und Masc hine_Wender -Schwader_R P_LW_BP_M ähwerke @ 45 3\mod_14640 01877943_78.d ocx @ 3078893 @ @ 1
Danger zone between tractor and machine
People standing between the tractor and machine may be seriously injured or killed if the tractor
rolls away or by carelessness or machine movements:
• Before working between tractor and machine: Shutdown and safeguard the machine, refer
to chapter Safety “Shutting Down and Safeguarding the Machine”. This also applies to brief
inspection work.
• If the power lifter has to be actuated, keep all people away from the range of movement of
the power lifter.
Pos: 18.6.32 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseGefahrenber eich bei eing eschaltetem An trieb_fuer alle @ 453\mod_ 1463995368453 _78.docx @ 307 8086 @ @ 1
Danger zone when drive is switched on
When the drive is switched on, there is a danger to life caused by rotating machine parts. There
must be nobody in the danger zone of the machine.
• Before starting the machine, direct all people out of the danger zone of the machine.
• If hazardous situations arise, switch off drives immediately and instruct people to leave the
danger zone.
Pos: 18.6.33 /B A/Sicherheit/1. Gru ndlegende Sic herheitshin weiseGefahren bereich Zapfwelle _fuer alle @ 45 3\mod_1463 993689007_78. docx @ 307 7933 @ @ 1
Danger zone PTO shaft
People may be caught, pulled in and seriously injured by the PTO shaft and the driven
components.
Before switching on the PTO shaft:
• Make sure that all safety devices are fitted and in the protection position.
• Ensure that there is nobody in the danger zone of PTO shaft and universal shaft.
• Switch off the drives if they are not necessary.
Pos: 18.6.34 /B A/Sicherheit/1. Gr undlegende Sic herheitshin weiseGefahren bereich Gelen kwelle_fuer alle @ 453\mod_1 463993075614_7 8.docx @ 30 77842 @ @ 1
Danger zone universal shaft
People may become caught by the universal shaft, pulled in and seriously injured.
• Observe the operating instructions of the universal shaft.
• Provide the section tube and universal shaft guards with adequate cover.
• Allow the universal shaft locks to engage.
• Attach the chains to prevent the universal shaft guards from rotating with the shaft.
• Ensure that there is nobody in the danger zone of PTO shaft and universal shaft.
• Make sure that the universal shaft guards are attached and functional.
• If the angles between universal shaft and PTO shaft are too large, switch off the PTO shaft.
The machine may be damaged. Parts could be hurled up and hurt people.
Pos: 18.6.35 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Gefahrenb ereich Nachlauf ende Maschinent eile - KW/T 10.02, KWT 160 0, div Sch wader @ 276\ mod_1404743505 456_78.docx @ 2 074851 @ @ 1
Danger zone due to coasting machine parts
When the drives have been switched off, the following machine parts will coast:
– Universal shaft
– Rotor
When machine parts are coasting, people may be seriously injured or killed.
Shut down and safeguard the machine, see chapter Safety, "Shutting down and safeguarding
the machine".
• Do not touch machine parts until they have come to a standstill.
Pos: 18.6.36 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
18
Pos: 18.6.37 /Üb erschriften/Üb erschriften 3/P- T/SSchutzvorr ichtungen funktio nsfähig halt en @ 187\mod_1 38002106200 4_78.docx @ 1 607105 @ 3 @ 1
3.3.10 Keeping safety devices functional
Pos: 18.6.38 /B A/Sicherheit/1. Gru ndlegende Sicherheitshin weiseSchutz vorrichtungen funktio nsfähig halten _fuer alle @ 4 53\mod_1464 012282699_7 8.docx @ 308019 8 @ @ 1
If safety devices are missing or damaged, people may be seriously injured or killed by moving
machine parts.
• Replace damaged safety devices.
• Remount dismounted safety devices and all other parts before start-up and move them to
protective position.
• If it is doubtful whether all safety devices have been correctly installed and are functional,
have a service centre check them.
Pos: 18.6.39 /Üb erschriften/Üb erschriften 3/P- T/PPersönliche Schutzausr üstungen @ 453 \mod_1464013 064506_78.docx @ 3080269 @ 3 @ 1
3.3.11 Personal Protective Equipment
Pos: 18.6.40 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eisePersönlich e Schutzausrüst ungen_fuer alle @ 494\mod _1488375125 538_78.docx @ 3 322625 @ @ 1
The wearing of personal protective equipment is an important safety measure. Missing or
unsuitable personal protective equipment increases health risks and injuries.
Personal protective equipment is for example:
– Suitable protective gloves
– Safety boots
– Tight-fitting protective clothing
– Hearing protection
– Protective goggles
• Specify and provide personal protective equipment for the particular job.
• Use only personal protective equipment which is in proper condition and offers effective
protection.
• Adjust personal protective equipment to the person, for example the size.
• Remove unsuitable clothing and jewellery (e.g. rings, necklaces) and cover long hair with a
hairnet.
Pos: 18.6.41 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Geeignete Klei dung tragen @ 176\mod _13730115200 74_78.docx @ 1508413 @ @ 1
Wear suitable clothing
Loose clothing increases the risk of it becoming caught or wrapped around rotating parts and of
it becoming caught on protruding parts. As a result, people may be seriously injured or killed.
• Wear tight-fitting clothing.
• Never wear rings, chains or other items of jewellery.
• Cover long hair with a hairnet.
• Wear sturdy shoes or protective work boots.
Pos: 18.6.42 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
19
Pos: 18.6.43 /Üb erschriften/Üb erschriften 3/P- T/SSicherheits kennzeichnunge n an der Masc hine @ 187\m od_13800213 11979_78.doc x @ 1607165 @ 3 @ 1
3.3.12 Safety signs on the machine
Pos: 18.6.44 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Sicherheits kennzeichnung en an der Maschin e_fuer alle @ 1 76\mod _1373014574 852_78.docx @ 15 08510 @ @ 1
Safety stickers on the machine warn of hazards in danger areas and are an important
component of the safety equipment of the machine. Missing safety stickers increase the risk of
serious and fatal injuries.
• Clean dirty safety stickers.
• After cleaning, always check that safety stickers are complete and legible.
• Immediately replace missing, damaged and unrecognisable safety stickers.
• Provide spare parts with the designated safety stickers.
Description, explanation and order numbers of the safety stickers, see chapter Safety, "Safety
stickers on the machine".
Pos: 18.6.45 /Üb erschriften/Üb erschriften 3/U-Z/ Verkehrssicher heit @ 187\ mod_1380021 550886_78.docx @ 1607192 @ 3 @ 1
3.3.13 Traffic safety
Pos: 18.6.46 /B A/Sicherheit/1. Grundlegende Sic herheitshin weise/Verkehrssic herheit - Gefa hren beim Fa hren auf Straße u nd Feld (anghä ngte, ohne Bef üllung/Beladung) @ 276\m od_14048048753 68_78.docx @ 2076345 @ @ 1
Dangers when driving on roads and in fields
The mounted or attached work machine changes the handling characteristics of the tractor. The
handling characteristics also depend on the operational state and on the ground. If the driver
does not consider changed handling characteristics, he may cause accidents.
• Observe procedures for driving on roads and in fields, see chapter "Driving and
transportation".
Pos: 18.6.47 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseVerkehrssicher heit - Maschi ne für die Stra ßenfahrt vorb ereiten_fuer all e @ 454\mod_ 14640999813 49_78.docx @ 3081856 @ @ 1
Dangers if machine is not prepared properly for road travel
If the machine is not prepared properly for road travel, serious accidents may occur with traffic.
• Before driving on roads, prepare the machine for road travel, refer to chapter Driving and
Transport, “Preparations for Road Travel”.
Pos: 18.6.48 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseVerkehrssicher heit - Gef ahren beim Betri eb der Maschin e in Hanglag e_fuer alle @ 524\ mod_151194 8957451_78.d ocx @ 358969 2 @ @ 1
Dangers when operating the machine on slopes
The machine may tilt when it is used on slopes. As a result, accidents may occur and people
may be seriously injured or killed.
• Do not work and drive on a slope unless the ground of the slope is flat and the adhesion of
the tyres to the ground is ensured.
• Turn the machine at low speed. Turn in a large arc.
• Avoid driving across a slope because the centre of gravity of the machine will be changed
by loading weight and by executing machine functions.
• Avoid jerky steering movements on a slope.
Pos: 18.6.49 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1

Safety
20
Pos: 18.6.50 /Üb erschriften/Üb erschriften 3/K- O/MMaschine sic her abstellen @ 187\mod_ 138002165295 1_78.docx @ 1 607221 @ 3 @ 1
3.3.14 Parking the machine safely
Pos: 18.6.51 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseMaschine sich er abstellen_f uer alle außer RP Solo und PreC hop @ 476\mod_14733 17327143_78.d ocx @ 321479 3 @ @ 1
An improperly parked machine may move uncontrollably or overturn. As a result, people may be
crushed or killed.
• Park the machine on horizontal and level ground capable of bearing the load.
• Before adjusting, repairing, servicing and cleaning the machine, ensure that it is securely
positioned.
• Observe section “Parking the Machine” in chapter Driving and Transport.
Pos: 18.6.52 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eise/Maschine sich er abstelle n - Unbeaufsich tigtes abstelle n (Anbaugerät) @ 271\mod_ 14026500877 89_78.docx @ 204 3151 @ @ 1
Unattended parking
Adults and playing children are at risk from an inadequately secured and unattended parked
machine.
• Before switching off the machine: Shut down and safeguard the machine, see chapter
Safety, "Shutting down and safeguarding the machine".
Pos: 18.6.53 /Üb erschriften/Üb erschriften 3/A- E/B/Betriebsst offe @ 187\mo d_138002199 6500_78.docx @ 1 607250 @ 3 @ 1
3.3.15 Consumables
Pos: 18.6.54 /B A/Sicherheit/1. Gru ndlegende Sic herheitshin weise/Betriebss toffe - Unge eignete Betriebssto ffe Verweis auf Technische Da ten @ 321\m od_14248581 73088_78.doc x @ 2481119 @ @ 1
Unsuitable operating materials
Operating materials that do not correspond to the requirements of the manufacturer may impair
the operational safety of the machine and cause accidents.
• Only use operating materials which meet the requirements.
For information on requirements relative to operating materials, refer to chapter Technical Data,
“Operating Materials”.
Pos: 18.6.55 /B A/Sicherheit/1. Gru ndlegende Sic herheitshinw eiseBetriebsstoffe - Umweltsch utz und Entsorgu ng_fuer alle @ 454\mod_ 1464155176116 _78.docx @ 3 082356 @ @ 1
Environmental protection and disposal
Consumables such as diesel fuel, brake fluid, frost protection agent and lubricants (e. g.
gearbox oil, hydraulic oil) may damage the environment and the health of people.
• Do not release consumables into the environment.
• Fill consumables in a liquid-tight labelled container and dispose of according to the official
regulations.
• Absorb leaked consumables with an absorbent material, fill them in a liquid-tight labelled
container and dispose of them according to the official regulations.
Pos: 18.6.56 /L ayout Module /---------------Seitenumbruch---------------- @ 0\mod_11961 75311226_0.d ocx @ 4165 @ @ 1