Krone MX 310 GL User manual

O r i g i n a l o p e r a t i n g i n s t r u c t i o n s
Short-cut loading wagon / Short-cut
feeder wagon
<v>T-Typ1</v> MX 310 GL </v>
<v>T-Typ2</v> MX 350 GL </v>
<v>T-Typ3</v> MX 310 GD </v>
<v>T-Typ4</v> MX 350 GD </v>
<v>T-Typ5</v></v>
<v>T-Typ6</v></v>
<v>T-Typ7</v></v>
<v>T-Typ8</v></v>
<v>T-Typ9</v></v>
<v>T-Typ10</v></v>
( <v>T-abMasch.-Nr.</v> from serial no. </v> : 785 000)
<v>T-Bestell-Nr.</v> Order no. </v> : 150 000 122 02 en
<v>B-Titelbild</v> </v>
18.03.2010

Foreword
2
Pos: 1 / BA/K onformitäts erkläru ngen/La dewagen/N eu a b 2 010/MX_B aureihe @ 40\mod_126 890535 6435_78 .doc @ 362692
C V0
EC Declaration of Conformity
We, Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10, D-48480 Spelle
hereby declare as manufacturer of the product named below, on our sole responsibility,
that the
Machine: "Short cut loading wagon"
Type / Types: MX 310 GL, MX 350 GL
Machine: "Short cut discharge wagon"
Type / Types: MX 310 GD; MX 350 GD
to which this declaration refers is in compliance with the relevant provisions of
EC Directive 2006/42/EC (Machinery) and EC Directive 2004/108/EC (EMC)
The signing Managing Director is authorised to compile the technical documents.
Spelle, 18.03.10
Dr.-Ing. Josef Horstmann
(Managing Director, Design and Development)
Year of manufacture: Machine No.:
Pos: 2/ BA/Vorwort/Se hrge ehrter Kunde @ 0\mod_11956 26300326_78.d oc@ 905
Dear customer,
Dear customer,
You have now received the operating instructions for the KRONE
product which you have purchased.
These operating instructions contain important information for the
proper use and safe operation of the machine.
If these operating instructions should become wholly or partially
unusable, you can obtain replacement operating instructions for
your machine by stating the number given overleaf.
Pos: 3/ BA/-----Seitenu mbruch------ @ 0\mod_119 6175311226_0. doc@ 4 165

Foreword
3
Pos: 4.1 /Überschriften/Ü berschriften 1/U-Z/ Vorwort @0 \mod_1195627 720123_78.doc @ 982
1 Foreword
Pos: 4.2 / BA/Vor wort/Lade wagen/Ver ehrter Kunde L adewage n @ 0\mod_1198 0581305 65_78. doc @ 32748
Dear Customer!
By purchasing your short cut loading wagon / short cut discharge wagon, you have acquired a
quality product from KRONE.
We are grateful for the confidence you have invested in us in buying this machine.
To be able to make optimum use of the short cut loading wagon / short cut discharge wagon,
please read these operating instructions thoroughly before you start using the machine.
The contents of this manual are laid out in such a way that you should be able to perform any
task by following the instructions step by step. It contains extensive notes and information about
maintenance, how to use the machine safely, secure working methods, special precautionary
measures and available accessories. This information and these instructions are essential,
important and useful for the operational safety, reliability and durability of the short cut loading
wagon / short cut / discharge wagon
Pos: 4.3 / BA/Vor wort/Lade wagen/W eiterer Verl auf L adewage n @ 0 \mod _1198058 134800_ 78.doc @ 32768
Note
Throughout the remainder of these operating instructions, both the "short cut
loading wagon" and the "short cut discharge wagon" will be referred to by the
terms "machine" and "loading wagon".
Pos: 4.4 /BA/Vor wort/Beachten Sie für Maschi ne @ 0\mod_119 5626904076_78.d oc @ 944
Please note:
The operating instructions are part of your machine.
Only operate this machine after you have been trained to do so and according to these
instructions.
It is essential to observe the safety instructions!
It is also necessary to observe the relevant accident prevention regulations and other generally
recognised regulations concerning safety, occupational health and road traffic.
All information, illustrations and technical data in these operating instructions correspond to the
latest state at the time of publication.
We reserve the right to make design changes at any time and without notification of reasons.
Should you for any reason not be able to use these operating instructions either wholly or
partially, you can receive a replacement set of operating instructions for your machine by
quoting the number supplied overleaf.
We hope that you will be satisfied with your KRONE machine.
Maschinenfabrik Bernard Krone GmbH
Spelle
Pos: 5/ BA/-----Seitenu mbruch------ @ 0\mod_119 6175311226_0. doc@ 4 165

Table of Contents
4
Pos: 6/ BA/Inhaltsverz eichnis @ 0\mod_1196861 555655_78.doc @ 15165
2 Table of Contents
1 Foreword .................................................................................................................................................3
2 Table of Contents ...................................................................................................................................4
3 Introduction...........................................................................................................................................11
3.1 Validity ............................................................................................................................................. 11
3.2 Identification Plate ........................................................................................................................... 11
3.3 Information Required for Questions and Orders.............................................................................. 12
3.4 Intended Use ................................................................................................................................... 13
3.5 Technical data ................................................................................................................................. 14
4 Safety.....................................................................................................................................................16
4.1 Introduction ...................................................................................................................................... 16
4.2 Identification of the hazard warnings ............................................................................................... 16
4.2.1 Re-Ordering the Adhesive Safety and Information Labels .......................................................... 17
4.2.2 Affixing the Adhesive Safety and Information Labels .................................................................. 17
4.2.3 Contact......................................................................................................................................... 17
4.3 Position of the Adhesive Safety Stickers on the Machine ............................................................... 18
4.4 Position of the General Information Labels on the Machine............................................................ 22
4.5 Identifying Symbols in the Operating Instructions ........................................................................... 24
4.6 Identification of the hazard warnings ............................................................................................... 24
4.6.1 Personnel Qualification and Training Fehler! Textmarke nicht definiert...................................... 25
4.6.2 Dangers in Case of Non-compliance with the Safety Instructions............................................... 25
4.6.3 Safety-conscious work practices ................................................................................................. 25
4.7 Safety Instructions and Accident Prevention Regulations............................................................... 26
4.8 Hitched Implements ......................................................................................................................... 27
4.9 PTO operation ................................................................................................................................. 28
4.10 Hydraulic system ............................................................................................................................. 29
4.11 Tyres ................................................................................................................................................ 29
4.12 Maintenance .................................................................................................................................... 30
4.13 Unauthorised Conversion/Modification and Spare Parts Production .............................................. 30
4.14 Inadmissible Modes of Operation .................................................................................................... 30
4.15 Safety Instructions on the Machine ................................................................................................. 30
5 Commissioning.....................................................................................................................................31
5.1 Installation of the fittings .................................................................................................................. 32
5.2 Installation of the fittings .................................................................................................................. 33
5.3 Assembly of automatic loader.......................................................................................................... 34
5.4 Changing the Drawbar Height and Adjusting the Hitch ................................................................... 36
5.5 Height adjustment............................................................................................................................ 37
5.5.1 Adjusting the Cylinders ................................................................................................................ 37
5.6 Angle Setting of the Hitch ................................................................................................................ 38

Table of Contents
5
5.7
PTO shaft......................................................................................................................................... 39
5.7.1 Length adjustment ....................................................................................................................... 39
6 Start-up..................................................................................................................................................41
6.1 Check before Start-up...................................................................................................................... 41
6.2 Mounting onto the Tractor................................................................................................................ 42
6.2.1 Connecting the trailer hitch to the trailer coupling of the tractor.................................................. 43
6.3 Hydraulics ........................................................................................................................................ 44
6.3.1 Special Safety Instructions .......................................................................................................... 44
6.3.2 Connecting the hydraulic lines..................................................................................................... 45
6.4 Hydraulic brake (Export) .................................................................................................................. 46
6.5 Hydraulic Connection to Block the Coaster/Steering Axle (Special Equipment)............................. 46
6.6 Drawbar Suspension ....................................................................................................................... 46
6.6.1 Special equipment ....................................................................................................................... 46
6.7 Electrical Connection in General for Standard and Comfort Versions ............................................ 47
6.8 Compressed Air Connections for the Compressed Air Brake ......................................................... 48
6.8.1 Special equipment ....................................................................................................................... 48
6.9 PTO shaft......................................................................................................................................... 49
7 Driving and Transport..........................................................................................................................50
7.1 Handling the Coaster/Steering Axle (Special Equipment)............................................................... 51
7.1.1 With hydraulic connection option (Medium)................................................................................. 51
8 Medium Control Unit ............................................................................................................................53
8.1 Mounting .......................................................................................................................................... 54
8.2 Control unit....................................................................................................................................... 54
8.3 Electrical power supply.................................................................................................................... 55
8.4 Control unit overview ....................................................................................................................... 56
8.5 Operational readiness...................................................................................................................... 58
8.6 Switching the working floodlight on/off ............................................................................................ 58
8.7 Swinging cutter in/out ...................................................................................................................... 59
8.8 Open / close tailgate ........................................................................................................................ 60
8.9 Raise/lower offset drawbar .............................................................................................................. 61
8.10 Raise/lower pick-up ......................................................................................................................... 62
8.11 Floor conveyor supply...................................................................................................................... 63
8.11.1 Activating the floor conveyor supply during loading (L/GL design only).................................. 63
8.11.2 Activating the floor conveyor supply during loading (D/GD design only) ................................ 63
8.11.3 Activating the floor conveyor supply during unloading (L/GL design only).............................. 64
8.11.4 Switching on rapid traverse during unloading (L/GL design only)........................................... 64
8.11.5 Setting of the initial speed of the floor conveyor for the unloading process (D/GD design only)
64
8.11.6 Activating the floor conveyor supply during unloading (D/GD design only) ............................ 64
8.11.7 Switching on rapid traverse during unloading process (D/GD design only) ............................ 64

Table of Contents
6
8.12
Floor conveyor reverse (D/GD design only) .................................................................................... 65
8.13 Sensor test....................................................................................................................................... 66
8.13.1 Setting of the floor conveyor speed 100 % (D/GD design only) .............................................. 67
8.13.2 Setting of the floor conveyor speed 0 % (D/GD design only) .................................................. 68
8.14 Job computer replaced .................................................................................................................... 69
8.15 „Load-Sensing“ parameter............................................................................................................... 70
8.15.1 Checking and, if necessary, adjusting the parameter “Load-Sensing”.................................... 70
8.16 Parameter „Cross conveyor“ optional (GD design only).................................................................. 71
8.16.1 Checking and, if necessary, adjusting the parameter “Cross conveyor”................................. 71
8.17 Messages......................................................................................................................................... 72
8.17.1 Wagon full................................................................................................................................ 72
8.17.2 Cutters removed ...................................................................................................................... 72
8.18 Alarm Messages .............................................................................................................................. 72
8.19 Malfunctions - Causes and Remedies............................................................................................. 73
8.20 Eliminating Alarm Messages ........................................................................................................... 74
8.21 Displaying the Software Version...................................................................................................... 74
9 Comfort Control Unit............................................................................................................................75
9.1 Mounting the control unit ................................................................................................................. 76
9.2 Electrical power supply.................................................................................................................... 76
9.3 Control unit....................................................................................................................................... 77
9.4 Overview.......................................................................................................................................... 78
9.5 Description of the keys .................................................................................................................... 79
9.6 Operational Readiness .................................................................................................................... 81
9.7 Manual Mode ................................................................................................................................... 82
9.7.1 Basic screen - loading operation ................................................................................................. 82
9.7.2 Basic screen image "Unloading operation" ................................................................................. 88
9.8 Buttons on the Machine ................................................................................................................... 94
9.9 Menu Level ...................................................................................................................................... 95
9.9.1 Short overview ............................................................................................................................. 95
9.9.2 Bringing up a Menu Level ............................................................................................................ 96
9.10 Main menu 1 „Settings“.................................................................................................................... 98
9.10.1 Menu 1-1 "Automatic loader" (optional)................................................................................... 99
9.10.2 Menu 1-2 "Silage" (optional) .................................................................................................. 100
9.10.3 Menu 1-3 "Axle suspension" (optional).................................................................................. 101
9.10.4 Menu 1-4 "Contrast"............................................................................................................... 103
9.10.5 Menu 1-5 "Floor conveyor speed" ......................................................................................... 105
9.10.6 Menu 1-6 "Cross conveyor" (optional - AX/ MX series)......................................................... 107
9.10.7 Menu 1-7 "Automatic unloader" ............................................................................................. 108
9.10.8 Menu 1-9 „Weight control“ ..................................................................................................... 110
9.10.9 Weight control (save full weight)............................................................................................ 111

Table of Contents
7
9.10.10
Saving the tare....................................................................................................................... 112
9.10.11 Calibration.............................................................................................................................. 114
9.11 Main Menu 2 "Counters"................................................................................................................ 116
9.11.1 Menu 2-1 „Customer counter“................................................................................................ 117
9.11.2 Menu 2-2 "Total counters" ..................................................................................................... 121
9.12 Main Menu 4 "Service" .................................................................................................................. 122
9.12.1 Menu 4-2 "Manual Sensor Test"............................................................................................ 123
9.12.2 Actuator test........................................................................................................................... 129
9.12.3 Menu 4-4 "Manual Actuator Test".......................................................................................... 130
9.12.4 Menu 4-5 "Sensor/actuator test axle suspension"................................................................. 133
9.13 Main Menu 5 "Information" ............................................................................................................ 134
9.14 Main menu 6 "Technician" ............................................................................................................. 135
9.14.1 Alarm Message...................................................................................................................... 136
9.15 Alarm messages ............................................................................................................................ 137
9.15.1 General alarms ...................................................................................................................... 137
9.15.2 Logical alarms........................................................................................................................ 138
9.15.3 Physical alarms...................................................................................................................... 139
10 ISO operation ......................................................................................................................................142
10.1 Method of operation....................................................................................................................... 142
10.2 Mounting ........................................................................................................................................ 142
10.3 Different Functions Compared to the KRONE In-cab Comfort kit ................................................. 143
10.3.1 With Electronically Controlled Coaster/Steering Axle Option (Comfort Control Unit)............ 144
10.3.2 Menu 4-6 "Diagnostics of Driving Speed/Direction of Travel Indicator" ................................ 145
10.3.3 Menu 1-8 "Softkeys ISO terminal" ......................................................................................... 146
10.3.4 Auxiliary Control..................................................................................................................... 148
10.3.4.1 Overview of Auxiliary Functions during the Loading and Unloading Mode ................... 148
10.3.5 Example of a Joystick Assignment for Fendt (Default Setting) ............................................. 149
11 Operation.............................................................................................................................................150
11.1 Preparations for the Loading Process ........................................................................................... 150
11.2 Loading Process ............................................................................................................................ 151
11.2.1 General Aspects on Loading ................................................................................................. 151
11.2.2 Avoiding Overloading............................................................................................................. 151
11.3 For electromagnetic medium operation ......................................................................................... 153
11.4 With Electromagnetic In-Cab Comfort Kit without Automatic Loader............................................ 154
11.5 With Electromagnetic In-Cab Comfort Kit with Automatic Loader................................................. 155
11.6 Completion of the loading process ................................................................................................ 156
11.7 Preparations for the Unloading Process........................................................................................ 156
11.8 Unloading Process......................................................................................................................... 157
11.8.1 GL Design .............................................................................................................................. 157
11.8.2 GD Design ............................................................................................................................. 157

Table of Contents
8
11.9
After unloading (GL+GD)............................................................................................................... 158
11.9.1 After travelling over a silo (GL+GD)....................................................................................... 158
11.10 Parking....................................................................................................................................... 159
12 Settings ...............................................................................................................................................161
12.1 Pick up ........................................................................................................................................... 162
12.1.1 Default setting (adjusting the working height)........................................................................ 162
12.1.2 Overload Protection of the Pick-up Drive .............................................................................. 162
12.1.3 Pick-up guide wheels, rear (special request)......................................................................... 163
12.2 Roller crop guide............................................................................................................................ 163
12.3 Cutting system ............................................................................................................................... 164
12.3.1 General Aspects .................................................................................................................... 165
12.3.2 Adjusting the chop length ...................................................................................................... 166
12.3.3 Cutter change ........................................................................................................................ 167
12.3.4 Grinding blades...................................................................................................................... 168
12.3.5 Inserting the cutters ............................................................................................................... 169
12.4 Eliminating Blockages.................................................................................................................... 171
12.5 Adjusting the blade bar .................................................................................................................. 172
12.5.1 Height adjustment of the fork pieces on the right and left side of the machine..................... 172
12.6 Setting the inclination of the blade bar .......................................................................................... 172
12.7 Adjusting the right cylinder to the locking bolt ............................................................................... 173
12.8 Adjusting the locking device for individual blades (response threshold) ....................................... 174
13 Maintenance........................................................................................................................................175
13.1 Special Safety Instructions ............................................................................................................ 175
13.2 Test run.......................................................................................................................................... 175
13.3 Torques.......................................................................................................................................... 176
13.4 Torques (Countersunk Screws)..................................................................................................... 177
13.5 Hydraulics ...................................................................................................................................... 178
13.6 Load-sensing connection............................................................................................................... 179
13.7 Adjusting the hydraulic system ...................................................................................................... 180
13.8 Display hydraulic block Comfort .................................................................................................... 181
13.9 Emergency Manual Activation ....................................................................................................... 182
13.10 Examples of Emergency Manual Activation .............................................................................. 183
13.11 High-pressure filter .................................................................................................................... 184
13.12 Hydraulic system circuit diagram Medium ................................................................................. 186
13.12.1 Legend Medium ..................................................................................................................... 187
13.13 Hydraulic system circuit diagram Comfort ................................................................................. 188
13.13.1 Legend Comfort ..................................................................................................................... 189
13.14 Tyres .......................................................................................................................................... 190
13.14.1 Checking and maintaining tyres............................................................................................. 191
13.14.2 Tyre air pressure.................................................................................................................... 192

Table of Contents
9
13.15
Hitches on the drawbar.............................................................................................................. 192
13.16 Position of sensors (L/GL) ......................................................................................................... 193
13.17 Position of sensors (D/GD) (left-hand side of the machine) ...................................................... 194
13.18 Position of sensors (GD) (right-hand side of the machine) ....................................................... 195
13.18.1 Adjusting the Sensors............................................................................................................ 196
13.18.1.1 Namur sensor d = 12 mm .............................................................................................. 196
13.18.1.2 Namur sensor d = 30 mm .............................................................................................. 196
13.19 Setting of the Sensor for Automatic Floor Conveyor Switch-off (GL)........................................ 197
13.20 Switching off the Floor Conveyor (GD)...................................................................................... 198
13.21 Filling Quantities and Lubrication Designations for Gearboxes................................................. 199
13.21.1 Oil Level Check and Oil Change Intervals (Gearboxes)........................................................ 199
13.22 Main gearbox ............................................................................................................................. 200
13.23 Conveyor drum .......................................................................................................................... 201
13.24 Discharge roller gear front (GD) ................................................................................................ 201
13.25 Floor conveyor drive .................................................................................................................. 202
13.26 Discharge roller gear front (GD) ................................................................................................ 203
13.27 Discharge roller gear rear (GD) ................................................................................................. 204
13.28 Chain tension ............................................................................................................................. 205
13.28.1 Drive conveyor unit ................................................................................................................ 205
13.28.2 Pick-up drive .......................................................................................................................... 206
13.29 Floor conveyor feed ................................................................................................................... 207
13.29.1 Shortening of the floor conveyor chain .................................................................................. 208
13.30 Discharger.................................................................................................................................. 209
13.31 Scraper ...................................................................................................................................... 209
13.32 Distance from Blade to Drum..................................................................................................... 210
13.33 Distance from Scraper to Drum ................................................................................................. 211
13.34 Checking the safety rollers of single blade locking device ........................................................ 212
14 Maintenance – lubrication chart .......................................................................................................214
14.1 Special Safety Instructions ............................................................................................................ 214
14.2 PTO shaft....................................................................................................................................... 215
14.3 Lubrication chart (GL) .................................................................................................................... 216
14.4 Lubrication points (GL) .................................................................................................................. 217
14.5 Lubrication chart (GD) ................................................................................................................... 218
14.6 Lubrication points (GD).................................................................................................................. 219
14.7 Central lubrication system for the drive chains of the conveyor unit and pick-up ......................... 220
15 Maintenance - Brake System.............................................................................................................221
15.1.1 Brake setting .......................................................................................................................... 221
15.1.2 Setting the Transfer Mechanism............................................................................................ 222
15.2 Air Filter for Pipe ............................................................................................................................ 223
15.3 Compressed-air reservoir .............................................................................................................. 224

Table of Contents
10
15.4
Upkeep after Daily Use.................................................................................................................. 224
15.5 Maintenance and Repair Work on the Loading Surface................................................................ 224
16 Placing in Storage ..............................................................................................................................225
16.1 Special Safety Instructions ............................................................................................................ 225
16.2 At the End of the Harvest Season ................................................................................................. 226
16.3 Before the Start of the New Season .............................................................................................. 227
16.4 Special Safety Instructions ............................................................................................................ 227
17 Malfunctions - Causes and Remedies..............................................................................................228
17.1 Special Safety Instructions ............................................................................................................ 228
Pos: 7/ BA/-----Seitenu mbruch------ @ 0\mod_119 6175311226_0. doc@ 4 165

Introduction
11
Pos: 8. 1 /BA /Einleit ung/Ei nleitung @ 0\mod_119 55624 98677_78. doc @ 416
3 Introduction
These operating instructions contain fundamental instructions. These must be observed in
operation and maintenance. For this reason, these operating instructions must be read by
operating personnel before commissioning and use, and must be available for easy reference.
Follow both the general safety instructions contained in the section on safety and the specific
safety instructions contained in the other sections.
Pos: 8. 2 /BA /Einleit ung/G ültigkeit/L adewage n/MX B aurei he @ 3\mod_120 5851031 041_ 78.doc @ 73875
3.1 Validity
These operating instructions apply to the loading wagons of the following types:
MX 310 GL, MX 310 GD, MX 350 GL, MX 350 GD
Pos: 8.3 /Überschrifte n/Überschrifte n 2/K-O/Kennzeich nung@ 0\mod_1 195564622099_ 78.doc @ 496
3.2 Identification Plate
Pos: 8.4 /BA/Einleitu ng/Kennzeichnung/ Kennzeichnung Ladewagen Tita n_AX_ZX_XL @ 13\mod_12252 89826588_78.doc @ 154985
Fig. 1
1) Type plate, 2) ALB sign
The machine data can be seen on a type plate (1). It is located on the right side of the machine
on the front of the frame.
Pos: 8.5 /BA/-----Seiten umbruch----- -@ 0\mod_ 1196175311226_ 0.doc@ 4 165

Introduction
12
Pos: 8.6 /BA/Einleitu ng/Angaben für Anfrage u nd Bestellungen _Fahrzeugident-Nr. @ 0\mod_11 95565119708_78. doc@ 515
3.3 Information Required for Questions and Orders
Type
Year of manufacture
Vehicle ID number
Note
The entire identification plate represents a legal document and should not be altered or
rendered illegible!
When asking questions concerning the machine or ordering spare parts, be sure to provide type
designation, vehicle ID number and the year of manufacture : To ensure that these data are
always available, we recommend that you enter them in the fields above.
Note
Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure
safety. The use of spare parts, accessories and other devices which are not manufactured,
tested or approved by KRONE will result in the revoking of the liability for damages resulting
thereof.
Pos: 8.7 /BA/-----Seiten umbruch----- -@ 0\mod_ 1196175311226_ 0.doc@ 4 165

Introduction
13
Pos: 8. 8.1 /Ü berschrift en/Ü berschrift en 2 /A-E/ Bestimm ungsg emäßer Gebrauch @ 0 \mod _1196401 545090_ 78.doc @ 7728
3.4 Intended Use
Pos: 8. 8.2 / BA/Ei nleitung/B estimm ungsgem äßer G ebrauch /Ladew agen/Bes timmu ngsge mäßer Ge brauch Ladewagen @ 0\mod_11980 5974303 4_78.d oc @ 32 892
Caution! - Collecting and loading other materials
Effect: Exclusion of liability
Collecting and loading other materials is permitted only with the manufacturer’s prior approval.
The basic requirements in any case are swath form loading of the loaded goods and automatic
lifting by the pick-up as it passes over them.
Loading wagons are designed for collecting, conveying and depositing agricultural crops such
as hay, straw and grass silage
Loading wagons are built exclusively for customary use in agricultural work or work of a similar
nature (intended use).
Pos: 8. 8.3 / BA/Ei nleitung/B estimm ungsgem äßer G ebrauch /Nicht bes timmu ngs ge mäss @ 0\mod_1196 401324 340_78. doc @ 7690
Any use of the machine for other purposes is deemed not to be in accordance with intended
use. The manufacturer shall not be liable for any resulting damage; the user alone shall bear
the risk.
Operation in accordance with intended use also includes observing the operating, maintenance
and service instructions specified by the manufacturer.
Unauthorised modifications to the machine may affect the properties of the machine or disrupt
proper operation. For this reason, unauthorised modifications shall exclude any liability of the
manufacturer for consequential damage.
Pos: 8.9 /BA/-----Seiten umbruch----- -@ 0\mod_ 1196175311226_ 0.doc@ 4 165

Introduction
14
Pos: 8.10 /BA/Einleitung/T echnische Daten @ 0\mo d_1195566374865_ 78.doc @ 594
3.5 Technical data
All information, illustrations and technical data in these operating instructions correspond to the
latest state at the time of publication. We reserve the right to make design changes at any time
and without notification of reasons.
Pos: 8. 11 /B A/Einl eitung/Tec hnisch e D aten/L adewage n/MX 31 0 Baurei he @ 3\mod_120 585039 7260_78.d oc @ 73855
When the loading wagon is in operation, the weights specified on the type plate must not be
exceeded.
Technical Data MX 310 GL MX 310 GD
Total length mm 8800 9600
Total width mm 2550
Total height mm 3650
Platform height mm 1450
Track width mm 1950 (2000)
Tyres 500/55-20 / 620/40 R22.5 / 700/45-22.5
DIN volume (DIN 11741) about m
3
31
KRONE foreign body safety
protection
Individual knife retention
Chop length for
21 blades
41 blades
approx. mm
approx. mm
74
37
PTO speed rpm max. 1000
Number of discharge rollers 2 2 (3
(1)
)
Pick-up working width mm 1900
Power consumption approx. kW
(HP)
88 (120)
Permitted gross weight kg 15.500 (20.000)
Permissible supporting load kg 2000
Loading time approx. min. 6-9
Unloading time approx. min. 2 3.0
Ground clearance of
hydraulic offset drawbar approx. mm
620
Required hydraulic
connections
1 x double-action or 1 x
single-action
(2)
1 x double-action or 1 x
single-action
(2)
1 Optional
2 with free return
No dimensions and weights necessarily represent standard design and are not considered binding
information.
Pos: 8.12 /BA/-----Seitenu mbruch------ @ 0\mod_11 96175311226_0.doc @ 416 5

Introduction
15
Pos: 8. 13 /B A/Einl eitung/Tec hnisch e D aten/L adewage n/MX 35 0 Baurei he @ 3\mod_120 585158 0728_78.d oc @ 73915
When the loading wagon is in operation, the weights specified on the type plate must not be
exceeded.
Technical Data MX 350 GL MX 350 GD
Total length mm 9550 10350
Total width mm 2550
Total height mm 3875
Platform height mm 1550
Track width mm 2000
Tyres 700/45-22.5-12PR / 710/50 R26.5 TL /
800/45 R26.5 TL
DIN volume (DIN 11741) about m
3
35
KRONE foreign body safety
protection
Individual knife retention
Chop length for
21 blades
41 blades
approx. mm
approx. mm
74
37
PTO speed rpm max. 1000
Number of discharge rollers 2 (3
(1)
)
Pick-up working width mm 1900
Power consumption approx. kW
(HP)
92 (125)
Permitted gross weight kg 20,000
Permissible supporting load kg 2000
Loading time approx. min. 6 -9
Unloading time approx. min. 2 3.5
Ground clearance of hydraulic offset
drawbar approx. mm
620
Required hydraulic connections 1 x double-action or 1 x single-action
(2)
1 Optional
2 with free return
No dimensions and weights necessarily represent standard design and are not considered binding
information.
Pos: 9/ BA/-----Seitenu mbruch------ @ 0\mod_119 6175311226_0. doc@ 4 165

Safety
16
Pos: 10.1 /Überschriften /Überschriften 1/P-T/ Sicherheit @ 0\mod_119 5566748646_78.doc @ 635
4 Safety
Pos: 10.2 /BA/Sicher heit/Ladewagen/Sich erheit Einführung Lade wagen @ 0\mod_11996868 57381_78.doc @ 32996
4.1 Introduction
The loading wagon is equipped with all safety devices (protective devices). However, it is not
possible to eliminate all potential hazards on this machine as this would impair its full functional
capability. Hazard warnings are attached to the machine in the relevant areas to warn against
any dangers. The safety instructions are provided in the form of so-called warning pictograms.
Important information on the position of these safety signs and what they mean is given below!
Pos: 10.3 /BA/Sicher heit/Besc hädigte o der unl esbare A ufkleber @ 0\mod_1 1955 67214115 _78.doc @ 674
Danger! - Danger zone of the machine
Effect: Danger to life or serious injuries.
• Immediately replace damaged or illegible adhesive labels.
• Following repair work, always attach appropriate adhesive safety stickers to all the
replaced, modified or repaired components.
• Never clean areas carrying an adhesive safety label using a high-pressure cleaner.
• Familiarise yourself with the statement of the warning pictograms. The adjacent text and
the selected location on the machine provide information on the special danger spots on
the machine.
Pos: 10.4 /B A/Sicher heit/K ennzeic hnung d er G efahrenhi nweise @ 28\mo d_1250 24437007 0_78.doc @ 274 714
4.2 Identification of the hazard warnings
Danger!
DANGER! - Type and source of the hazard!
Effect: Danger to life or serious injuries.
• Measures for hazard prevention
Warning !
WARNING! - Type and source of the hazard!
Effect: Injuries, serious material damage.
• Measures for hazard prevention
Caution!
CAUTION! - Type and source of the hazard!
Effect: Property damage
• Measures for risk prevention.
Pos: 10.5 /BA/-----Seite numbruch------ @ 0\mod _1196175311226 _0.doc @ 4165

Safety
17
Pos: 10.6 /BA/Sicher heit/Nach bestellung/ Anbringu ng A ufkleber @ 0\mod_1 195637 337107 _78.doc @ 1079
4.2.1 Re-Ordering the Adhesive Safety and Information Labels
Note
Every adhesive safety and information label is assigned an order number and can be ordered
directly from the manufacturer or from an authorized dealer (see Section "Contact").
4.2.2 Affixing the Adhesive Safety and Information Labels
Note - Affixing an adhesive label
Effect: Adhesion of the label
• The surface for affixing the adhesive label must be clean and free of dirt, oil and grease.
Pos: 10.7 /Überschriften /Überschriften 3/A-E/A nsprechpartner @ 0\mo d_1195569394286_ 78.doc @ 839
4.2.3 Contact
Pos: 10.8 /Adressen/A dresseM aschinenfabri kKRON ESp elle@ 0\ mod_119556853 1083_78.doc @ 734
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Strasse 10
D-48480 Spelle (Germany)
Telephone: + 49 (0) 59 77/935-0 (Head Office)
Fax.: + 49 (0) 59 77/935-339 (Head Office)
Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic)
Fax.: + 49 (0) 59 77/935-359 (Spare parts - export)
Email: [e-mail]
Pos: 10.9 /BA/-----Seite numbruch------ @ 0\mod _1196175311226 _0.doc @ 4165

Safety
18
Pos: 10.10 /Überschrif ten/Überschrifte n 2/K-O/Lage der Sic herheitsaufkleber a nder M aschine @ 0\mod_11 95634967326 _78.doc @ 1020
4.3 Position of the Adhesive Safety Stickers on the Machine
Pos: 10.11 /BA/Sicherheit/ Aufkleber/Ladewage n/Sicherheitsa ufkleberM XG L/GD @ 3\mod_1205852 762588_78.doc @ 73955
GL
MX000003
7
8
9
7
7
1
2
5
66
8
11
4
4
11
94
5
3
3
94
5
9
GL
GD
10
GD
GL
Fig. 2:

Safety
19
1)
Before starting the machine,
read and observe the
operating instructions and
safety instructions.
Order No. 939 471-1 (1x)
2)
PTO speeds must not be exceeded! The
operating pressure of the hydraulic system
must not exceed 200 bar!
939 101-4
MAX. 1000/ min
MAX. 200 bar
Order No. 939 101-4 (1x)
3)
Never reach into the pick-up
area when the tractor engine
is running and the PTO shaft
is connected.
Order No. 942 407-1 (2x)
4)
Do not step under the raised
tailgate.
Order No. 939 521-1 (2x)
5)
Do not step on the loading
surface when the PTO shaft is
connected and the engine is
running
Order No. 939 414-2 (1 x) GD
Order No. 939 414-2 (3 x) GL
6)
No one is permitted in the
swivel range of the tailgate
while the tractor motor is
running.
Order No. 939 412-2 (2x)
7)
Never reach into the area
where there is danger of
crushing as long as parts
could be moving.
Order No. 942 196-1 (4x)
8)
The accumulator is subject to gas and oil
pressure. Disassemble and repair in strict
accordance with the instructions in the
technical handbook. (Only for hydraulic
drawbar suspension)
Order No. 939 529-0 (2x)
942 196 -1

Safety
20
MX000003
7
8
9
7
7
1
2
5
66
8
11
4
4
11
94
5
3
3
94
5
9
GL
GD
10
GD
GL
Fig. 3: