KRUG+PRIESTER IDEAL 5009-2 CC User manual

08-2022 20221212zm5009 7050 EN 9700031 9700074
Document Shredders
Modular conveyor belt system
EN Operating Instructions
IDEAL 5009-2 CC
IDEAL 5009-3 CC

2
08-2022 20221212zm5009 7050 EN 9700031 9700074
• Table of Contents •
Intended use 3
Safety precautions 4
Installation 10
Operation 17
Possible malfunctions 23
Accessories 28
Technical Information 29
EC-declaration of conformity 31

3
08-2022 20221212zm
A
5009 7050 EN 9700031 9700074
Do not shred materials forming loops and
splintering.
Material not caught by the shredding
mechanism must be pushed with the
pusher (A).
• Intended use •
• Safety precautions •
Intended use
1. This document shredder is intended for
shredding lose or crumpled up paper,
cartons, including staples, and a small
number of discs.
2. The rugged single-blade cutting unit
shreds entire file folders, including ring
binder mechanism.

4
08-2022 20221212zm5009 7050 EN 9700031 9700074
•Safety precautions •
Please ensure to read this operating manual before starting the machine for the first
time and please strictly follow the safety instructions mentioned herein. This manual
must be available at any time.
Take care of long hair!
Do not grasp into the cutting mechanism!
Take care of ties and other loose pieces of clothing!
Caution, moving parts!

5
08-2022 20221212zm5009 7050 EN 9700031 9700074
No operation by children!
Do not destroy accumulators/batteries!
Do not use any spray cans with flammable content near to the
document shredder!
Do not use any flammable cleaning agents.
•Safety precautions •

6
08-2022 20221212zm5009 7050 EN 9700031 9700074
Quick stop Press emergency stop!
This machine is designed for one-man
operation only !
All components which could endanger the
operator are covered by a guard.
•Safety precautions •

7
08-2022 20221212zm
C
B
A
A
5009 7050 EN 9700031 9700074
No operation without the following safety
devices:
• Covering panels (A) tightly screwed.
• Grid (B) and door (C) which are secured by
switches.
Machine operates only when the door . . .
. . .and grid are closed.
•Safety precautions •

8
08-2022 20221212zm5009 7050 EN 9700031 9700074
Remove the mains plug before cleaning the
machine !
Do not carry out your own repairs on the
paper shredder !
(See page 27).
Do not use any kind of uplift assistance
•Safety precautions •

9
08-2022 20221212zm5009 7050 EN 9700031 9700074
Protect mains cable against heat, oil and from
sharp edges.
When not in use for a longer time switch o
the machine.
•Safety precautions •

10
08-2022 20221212zm
B
A
~1200 kg
(2630 lbs)
>110 cm
5009 7050 EN 9700031 9700074
The transport safety device (A) and (B)
must be mounted when the machine is
transported lengthwise. The machine must be
transported from the rear.
Make sure the pallet-jack is centred under the
machine.
Do not lift up the machine from the
operating side.
Do not lift the machine more than necessary
risk of tipping.
• Installation •

11
08-2022 20221212zm
780 mm
660 mm
32 “
27 “
5009 7050 EN 9700031 9700074
• Do not cover the ventilation slits.
• Consider the floor loading.
Weight approx. 1200 kg.
• Installation •

12
08-2022 20221212zm
A
3
3
A
5009 7050 EN 9700031 9700074
• Open the door.
• Remove the transport safety device (A) and
keep for later use.
• Mount the supporting screws (A).
• Screw down the supporting screws until the
rear castors are balanced.
Waste cart
• Put the plastic bag into the waste cart as
described under "replace bag".
(See page 22)
• Push the cart into the machine, with the
open side facing you, until it touches the
buer.
• Close the door.
• Installation •

13
08-2022 20221212zm
B
A
5009 7050 EN 9700031 9700074
Remove the back transport safety device (B).
Conveyor belt (Accessory)
When using a conveyor belt the following
modifications must be made on the machine:
Remove the springs from the ball-ends (A) on
both sides.
• Installation •

14
08-2022 20221212zm5009 7050 EN 9700031 9700074
Dismount the tie-bar.
Push the pusher to the back.
Push back the conveyor belt into the
machine.
• Installation •

15
08-2022 20221212zm
B
A
5009 7050 EN 9700031 9700074
Turn both handles to lock.
Plug into the wall socket.
If the machine is to be operated with a waste
cart the rear transport safety device (A) and
tie-bar (B) must be re-assembled.
To assemble follow the same instructions in
the reverse order.
• Installation •

16
08-2022 20221212zm
o.k.
Start
Start
o.k.
5009 7050 EN 9700031 9700074
Check the direction of the conveyor belt.
Start the machine.
Wrong rotating direction Changes must be
done by an electrician.
• Installation •

17
08-2022 20221212zm
A
5009 7050 EN 9700031 9700074
Starting the machine
Grid (A) must be closed.
• Operation •
Operating elements
A- Start
B- Stop, light for "door open" and "grid
open"
C- Reverse switch, lamp showing "bag full"
D- Key switch
E- Standby
F- Mains switch
G- Temperature indicator / yellow pilot light
H- Emergency-stop

18
08-2022 20221212zm
E
D
C
BA
A
5009 7050 EN 9700031 9700074
• Emergency-stop (A) pulled out.
• Main switch (B) to position "I".
• Switch on the key switch (D)
• Turn key switch standby (C) illuminates.
• Press the black button (E)
conveyor belt is running.
Distribute the paper over the feeding belt.
Shred continous paper only in stacks.
The grid (A) can be lifted to remove jammed
paper.
• Operation •

19
08-2022 20221212zm
B
A
5009 7050 EN 9700031 9700074
Stopping the machine
Press the white button (A)
or emergency-stop (B).
Keep hands away from running
shredding mechanism.
When large amounts of paper are inserted
the machine automatically adjusts to a more
powerful, slower capacity.
If this capacity is still not powerful enough
the machine will reverse shortly and then
return to "forwards mode". This is repeated
until all material is completely destroyed.
• Operation •

20
08-2022 20221212zm
A
B
5009 7050 EN 9700031 9700074
Yellow pilot light flashes. Motor is
overheated reduce the amount of
material on the feeding belt. The machine
should work preferably at high speed.
Stopping the machine
• Turn main switch (A) to position "0" the
entire machine shuts down.
• Turn the key switch (B) and remove the key
now the machine is secured from
unauthorised use.
Stops automatically when grid is opened.
Indicator for (O) lights.
• Operation •