KStrong UFZ850100 Operator's manual

USER INSTRUCTION MANUAL
TRAUMA RELIEF STRAPS
THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODEL:
UFZ850100

WARNING: These instructions must be carefully read by all individuals who wear or maintain this product, including those who
have any responsibility involving the selection, application, use or repair of this product,. This product will perform as designed only
if it is used and maintained according to the instruction. Otherwise, it could fail to perform as designed, and persons who rely on this
product could sustain serious personal injury.
Avoid the effects of suspension trauma with the use of trauma relief straps.
1. Extremely effective, specially designed to help relieve the negative effects of suspension trauma.
2. Compact and light in weight, hence does not hamper the activity of worker while at work.
3. Allows the suspended worker to stand up in his harness to relieve pressure.
4. Easy to attach to the harness with the help of the textile loop and velcro provided.
5. Easy deployment, operation is fool-proof.
It is recommended that the trauma relief straps should be inspected and examined by a competent person for any damage of failure, if
the need arises. The observation should be recorded in the equipment record table below. In case damage is observed, the trauma relief
straps should be replaced immediately.
Max user weight - 310 lbs.
INSTALLATION
Install each Trauma Relief Strap immediately above where the leg strap meets the side/shoulder strap (as shown).
Step 1. Pass Trauma Relief Strap web loop behind harness strap and pull back around.
Step 2. Pull Trauma Relief Strap pouch through web loop and choke down to harness strap. Pouch must be on outside of harness strap.
Step 3. Secure Trauma Relief Strap snap buckle around harness strap.
Step 4. Repeat steps 1-3 on opposite side.
Step 5. Trauma Relief Straps are now installed and ready to use. Please familiarize yourself with the steps of use on next page.
2
1 2
3 4

Put your feet
into the loop
4
Unzip the
pouches fitted
on both sides
of Harness
1
Hold the 2
straps
together
2 3
Connect the straps
with each other
making a loop
with the help of
easy-to-use
buckle
6
Adjust the sit
strap towards
the front to
release pressure
and give a
seating posture
Stand onto the
loop, so that the
thigh strap are
free to move
5
STEPS TO USE
3
INSPECTION
Regular Inspection is recommended prior to using
this product with harness. It can be used on numerous
occasions if it has been inspected prior to use and shows
no sign of damage.
MARKING ON PRODUCT
The trauma relief straps are marked with:
• Identication of the manufacturer
• Product code
• Month and Year of Manufacture
• UID for traceability
• Material
HOW TO DISPOSE OF TRAUMA RELIEF STRAPS
When the trauma relief straps become unt or in case of
any wear and tear, dispose of them immediately.
Follow the following steps for disposal:
• Make the three plastic crates namely- Textile, Metal
& Plastic for placing the respective components of
the trauma relief straps.
• Spread the trauma relief straps on a table / at
surface.
• Inspect the wear & tear present on the trauma relief
straps.
• If any wear and tear is observed, dispose of the
trauma relief straps using a sharp pair of scissors;
rst cut the Textile and dismantle the trauma relief straps.
• Put the Textile, Plastic & Metal components in their respective plastic crates.
Inspection Log
Product must be
inspected and recorded
every 6 months by
a competent person.
Date of First Use:
_________________
Keep these instructions
safe at all times. The
instructions must be
read and understood
before using the
equipment!
UID Date of Manufacture Material
: : :
XXXXXXXXXXXXX MM/YYYY Polyester
Model: UFZ850100
ANY ALTERATION,
ABUSE OR MISUSE
OF THE PRODUCT
VOIDS THE
WARRANTY.
kstrong.com
Made in India
DO NOT
REMOVE LABELS
BARCODE
Suspension
Intolerance
Strap
Suspension
Intolerance
Strap
Suspension
Intolerance
Strap
YR JF M A M J J A S O N D
20__ 20__ 20__ 20__ 20__ 20__ 20__ 20__ 20__ 20__
MO
QR CODE

UKS/UFZ850100/210609/V2
EQUIPMENT RECORD
Product:
Model and type/identication Trade name Identication number
Manufacturer Address Tel, fax, email
Year of manufacture Purchase date Date rst put into use
Other relevant information (e.g. Document number)
PERIODIC EXAMINATION AND REPAIR HISTORY
Date
Reason for entry
(periodic examination
or repair)
Defects noted, repair
carried out and other
relevant information
Name and signature
of competent user
Periodic
examination
next due date
KStrong Inc.
150 N. Radnor Chester Road Suite F200
Radnor, Pennsylvania 19087 United States
Contact number : 1-833-KSTRONG
www.kstrong.com
USA South America Asia
LIFESPAN: The estimated product Lifespan is 10 years from the date of rst use. The following factors can reduce the Lifespan of
the product: intense use, contact with chemical substances, especially aggressive environments, extreme temperature exposure, UV
exposure, abrasions, cuts, violent impacts, bad use or maintenance.
DISCLAIMER: Prior to use the end user must read and understand the manufacturer’s instructions supplied with this product at the time
of shipment and seek training from their employer’s trained personnel on the proper usage of the product. Manufacturer is not liable or
responsible for any loss, damage or injury caused or incurred by any person on grounds of improper usage or installation of this product.