Kusam-meco KM 991 User manual

Each “KUSAM-MECO” product is warranted to be free from defects in
material and workmanship under normal use & service. The warranty period
is one year (12 months) and begins from the date of despatch of goods. In
case any defect occurs in functioning of the instrument, under properuse,
within the warranty period, the same will be rectified by us free of charges,
provided the to and fro freight charges are borne by you.
This warranty extends only to the original buyer or end-user customer of a
“KUSAM-MECO” authorized dealer.
This warranty does not apply for damaged IC’s, fuses, disposable batteries,
carrying case, test leads, or to any product which in KUSAM- MECO’s
opinion, has been misused, altered neglected, contaminated or damaged by
accident or abnormal conditions of operation or handling.
“KUSAM-MECO” authorized dealer shall extend this warranty on new and
unused products to end-user customers only but have no authority to extend a
greater or different warranty on behalf of “KUSAM-MECO”.
“KUSAM-MECO” warranty obligation is limited, at option, for free of charge
repair, or replacement of a defective product which is returned to a “KUSAM-
MECO” authorized service center within the warranty period.
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
USE. “KUSAM-MECO” SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE
WHATSOEVER.
All transaction are subject to Mumbai Jurisdiction.
WARRANTY
G-17, Bharat Industrial Estate, T.J. Road, Sewree(W), Mumbai-400 015. (INDIA)
Sales Direct: 91-22-24156638 Tel: [phone] Fax: [phone]
Email : [email protected] Website: www.kusamelectrical.com
®
An ISO 9001:2015 Company
OPERATION MANUAL
®
An ISO 9001:2015 Company
PHASE ROTATION TESTER
MODEL - KM 991

® ®
1 2

® ®
34

MUMBAI
TEST CERTIFICATE
TRMS DIGITAL INSULATION MULTIMETER
This Test Certificate warrantees that the product has been
inspected and tested in accordance with the published
specifications.
The instrument has been calibrated by using equipment
which has already been calibrated to standards traceable
to national standards.
MODEL NO. ________________
KM 991
SERIAL NO. ___________
DATE: ___________
ISO 9001
REGISTERED
QC
PASS
KUSAM-MECO
® ®
56
1. Instruction Manual x 1
2. Battery (1.5V AAA) x 2
3. Carrying Case x 1
Package List