Kwikset 00883351666312 User manual

Privacy
Levers
Passage
Levers
Emergency Unlock tool
(privacy locks only)
62878003 Rev 03
Door edge NOT
chiseled
A
AB
C (2x)
or
E*
A
G
J
L
K
M
B
F
CD
Adapter*
Parts in the boxRequired tools
Latch
Strike
Screws
Not required for all applications
Allen wrench
wood block
Additional tools
(if needed)
or
Optional
Square Rose
Optional
Square Rose
Installation Guide
*Passage levers only: Call
Kwikset to order a service kit
for 21/4" (57 mm) thick doors.
23/8" (60 mm)
or
23/4" (70 mm)
13/8"–13/4"*
35 mm–44 mm*
21/8"
54 mm
1"
25 mm
Hold the latch in front of the door hole, with
the latch face lush against the door edge.
If the latch holes are centered in the door hole,
no adjustment is required. Proceed to step 3.
If the latch holes are NOT centered, adjust
latch. See “Latch Adjustment” (step 2C).
Latch Adjustment (only if needed)
Move the pin to
extend the latch.
not centered
centered
23/8" (60 mm)
23/4" (70 mm)
Backset
Centerline
13/8" (35 mm)
13/4" (44 mm) 21/4" (57 mm)
Edge of the door
Fold
Drilling Template
Instructions continue on reverse
Template is only needed if a new hole must be drilled in the door.
Face of the door
Door edge chiseled
wood block
slant of latch bolt faces door frame
slant of latch bolt faces door frame
door frame
door frame
Remove plates.
Install drive-in
collar.
H
A
A
B
C
Prepare door and check dimensions
1
Adjust the backset of the latch (if needed)
2
Install latch
3
*Adapter only
included with
straight levers

Push up on lever base while
tightening screws to keep latch
horizontal and centered.
J/L
K/M
exterior
Install adapter* in
exterior door hole.
exterior
IMPORTANT: If installing a passage lock on
an entry door, make sure the lever with the
screw holes is on the interior side of the door.
Press latch
bolt to install
exterior lever.
correct incorrect
Install interior
lever base.
Find your lever
style in the chart
and determine if
your levers are
oriented correctly:
If oriented incorrectly, remove
both levers and install them on
opposite sides of the door.
If lever base won’t sit lush,
rotate turnbutton to align.
Align round edges.
E
Tip: Pull lever slightly away from
door to see where screws insert.
D (2x)
lever with holes
E
G
G
align
F
Save the bedroom/bathroom emergency
unlock tool (F) for future use.
Privacy locks only
!
*Adapter only
included with
straight levers
counter-clockwise
Install interior lever and tighten
pre-installed set screw.
clockwise
Loosen the pre-installed set screw to
remove lever. Do not remove set screw.
A
A
B
D
G
F
C
Close door and test latch operation. If latch is
loose in the strike, adjust strike tab so it grips
the latch bolt better when the door is closed.
H
C (2x)
tab
B
Install adapter (if included in the box)
4
Install strike on door frame
Remove interior lever
5
Install levers
6
7
Rely on premium home doors & windows by Kwikset if you’re looking for quality and efficiency.