L.L.Bean OTNQ9 User manual

1 of 3 6/27/17
Pntd Frmhs Bench Small
Painted Farmhouse Bench Small - OTNQ9 & OTNR1
Thank you for purchasing our Bench. It is helpful to have a second person availble during the assembly of this product.

2 of 3 6/27/17
Pntd Frmhs Bench Small
STEP 1
Identify and count all parts using diagram above.
STEP 2
Identify and count hardware.
Lay out parts on a non-abrasive surface to avoid scratching finish.

3 of 3 6/27/17
Pntd Frmhs Bench Small
STEP 3
Position Top Assembly (A) upside down on non-
abrasive surface. Attach 2 Post (B) using 2 M6 *
45MM Bolts (D). Use Wrench (E) to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 4
Align Bottom Shelf (C) with inserts in Post (B).
Attach Bottom Shelf (C) to Post (B) using 2 M6 *
45MM Bolts (D). Use Wrench (E) to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 5
Attach 2 additional Post (B) to the Top (A) and
Bottom Shelf (C) using 4 M6 * 45MM Bolts (D).
Use Wrench (E) to intall and tighten all Bolts.
At this point tighten all assembly Bolts.
STEP 6
Position assembled case upright.
CARE: Clean with mild soap and wipe dry.
www.llbean.com
Product Support 1 800 341 4341