L.L.Bean OTNR4 User manual

1 of 2 6/27/17 0PWQ3163103
Thank you for purchasing our Hook Shelf. Assembly of this product requires a screwdriver.
We have found it helpful to have a second person present in at least one step of the assembly.
Painted Farmhouse Wall Shelf w/Hooks - OTNR4 &
OTNR5

2 of 2 6/27/17 0PWQ3163103
Lay out product on a non-abrasive surface to avoid scratching finish.
STEP 1
Identify and count all parts using diagram above.
Part A is the Hutch, Part B is the Cleat.
STEP 2
Identify and count hardware using box at right.
Note: 3 of the wood screws are attached to the Cleat (B) during transit and will be removed in the next step.
STEP 3
STEP 4
Set Hook Shelf (A) onto Cleat (B) and attach
with three 50mm wood screws (C).
NOTE: It is recommended that the Hook Shelf be
stud-mounted for stability. If unable to locate
studs, you may need to use an alternative fastener
for your application.
CARE: Clean with mild soap and wipe dry.
www.llbean.com
Product Support 1 800 341 4341
Remove Cleat (B) from the back of the Hook
Shelf (A) by unscrewing the 3 50mm pre-
installed Wood Screws (C) on top of Hook Shelf
(A). Locate studs behind drywall in desired
location. Attach cleat with three 50mm Wood
Screws (C) to studs.
NO. QTY.DESCRIPTIONDRAWING
AHOOK SHELF 1
FENCH CLEAT 1
B
CWOOD SCREW 6
B
C
A
B
C