L.L.Bean HOME OTNR2 User manual

1 of 3 6/27/17
Pntd Frmhs 2 Shelf Console
Painted Farmhouse 2 Shelf Console - OTNR2 & OTNR3
Thank you for purchasing our Small Console. It is helpful to have a second person availble during the assembly of this product.

2 of 3 6/27/17
Pntd Frmhs 2 Shelf Console
STEP 1
STEP 2
Identify and count hardware.
Lay out parts on a non-abrasive surface to avoid scratching finish.
Identify and count all parts using diagram above.
F
8
M6*45MM
BOLT
E
QTY.DRAWING DESCRIPTIONNO.
1

3 of 3 6/27/17
Pntd Frmhs 2 Shelf Console
STEP 3
Position Top Assembly (A) upside down on non-
abrasive surface. Attach 2 Post (B) using 2 M6 *
45MM Bolts (E). Use Wrench (F) to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 4
Align Shelf (D) with slots in Post (B). Attach 2
additional Post (B) using 2 M6 * 45MM Bolts (E).
Use Wrench (F) to install Bolts.
Do not over tighten Bolts at this time.
Assemble Loose.
STEP 5
Position Bottom Panel (C) between the 4 Post (B).
Attach Bottom Shelf (C) to Post using 4 M6 *
45MM Bolts (E). Use Wrench (F) to install and
tighten all Bolts.
At this point tighten all assembly Bolts.
STEP 6
Position assembled case upright.
CARE: Clean with mild soap and wipe dry.
www.llbean.com
Product Support 1 800 341 4341
E
E